Controllers & Sensors

Application:

Battery operated hose tap timer.

Features:

• Individual Day Programming:
  – Can be set to water on specifica days.
• Irrigation Duration from 1 minute to 12 hours.
• Up to four start times per day.
• Electronic manual operation via the controller.
• Rain off suspension option.
• Low battery indicator.
• Internal filter installed in the controller.
• Operated by a 9V alkaline battery.
• Battery lasts up to one season (Pending site and operating modes.).

Technical Specifications:

• Controller body – ABS
• LCD Display.
• Seals –EPDM.
• Standard – CE.
• Battery – 9V alkaline (optional extra).
• Maximum capacity 23LPM.
• Working pressure range – 100 – 1000kPa

Application:

Battery operated controller used to control Galcon DCV-25 actuators for watering lawns and garden beds.

Features:

• Indenpendent station programming, single station (DC1)
• Up to 4 start times per station
• Watering time from 1 minute to 12 hours
• Irrigation schedule – 7 day calendar or interval from 1 to 30 days
• Controller is powered by two 9 volt akaline batteries
• Rain off position
• Water Resistant
• Operating pressure range 70kPa – 1000kPa
• DC1 supplied with 1 DVC-25mm
• Maximum flow through DVC-25mm, 160LPM*

* Check velocity in pipe work may exceed industry standard for safe irrigation practices.

Application:

Battery operated controller used to control Galcon DCV-25mm actuators for watering lawns and garden beds.

Features:

• Operation of 6 to 12 valves plus a master valve (or pump using latching relay, optional extra).
• Separate irigation schedule programmable for each valve.
• Up to 4 irrigation activations per day per valve in programmable weekly schedule mode.
• Programmable weekly/cyclical irrigation schedules.
• Irrigation window in cyclical program mode (Loop mode).
• Irrigation duration: 1 second to 12 hours.
• Irrigation frequency from once every minute to once every 30 days in cyclical program.
• Manual operation of individual valves.
• Sequential manual operation of all valves.
• Operation of valves up to 50 metres from the controller.

Main Features Specific to DC12S

• Weather resistant.
• Operated by four 9V alkaline batteries.
• Operates Galcon DCV-25mm only.

Main Features Specific to DC6S

• Weather resistant.
• Operated by two 9V alkaline batteries.
• Operates Galcon DCV-25mm only.

Application:

Used for starting pumps from 24VAC output irrigation controller.

Features:

• Automatic starts pump from output of controller
• Lockable weather resistant case
• Covered wiring compartment for protection

Specification:

• Contact rating 2HP & 240 VAC
• 1 Phase, coil rating 24 VAC, 3VA
• Double pole, single throw 20 amp

Description:

Reliable battery–powered control without the need of electric connection. For isolated sites or power-restricted areas and for the special needs of drip zones, Hunter provides the ideal economical answer. The SVC mounts to a valve solenoid quickly and easily – without screws, drills or additional wires – and the unit’s solid contruction ensures it can handle the harsh environment of a valve box.

Features:

• Type: Fixed
• Battery Operated
• Number of stations: 1, 2, 4, 6
• Enclosure: Outdoor Plastic
• Independant Programs: 3
• Start times per program: 4
• One touch manual start and advance
• Master Valve operation (available in 2, 4, 6 station models)
• Solar Panel Kit (SPNODE) provides maintenance-free operation
• Accepts single or double 9V batteries for extended battery life
• Solenoid wire length up to 30m (use 1mm wire)
• Programmable off mode
• Submersible to 4m (IP68 rated)
• Battery life indicator
• Protective rubber cover
• Wattanty period: 2 years
• Easy Retrieve memory
• Season Adjustment: Global

Specifications:

• Sensor inputs: 1
• Operates DC latching solenoids only (P/N 458200)
• Operating temperature: -18C to 60C
• Power source: 9V battery (up to two) or Solar Panel
• Solar Panel Kit SPNODE eliminates the need for batteries and provides maintenance-free operation

Models:

Description:

There’s nothing more embarrassing – or more wasteful or costly – than an irrigation system that runs when it doesn’t have to…in the rain. Mini-Clik provides the simplest, most effective to prevent sprinklers from coming on during or after rain. It easily installs on any automatic irrigation system, then shuts sprinklers off in a storm and keeps them off, automatically compensating for the amount of rainfall that occurred. Disks absorb water and expand proportionally to the amount of rain that fell. As the moisture-laden disks expand, they eventually activate a switch that interrupts the circuit from the controller to the solenoid valves. Once dry, they contract and release the switch. thus, Mini-Clik automatically resets without ever affecting the controller. There’s no better way to ensure that a system isn’t watering when it isn’t necessary.

Features:

• Easily installs on any automatic irrigation system
  Versatile enough to work with all popular controllers
• Patented mechanism cannot be fouled by dirt or debris
  Reliable operation, no false shutdowns
• Adjusts to actuate at various rainfall quantities
  Set from 3 to 25mm
• Includes 7.6m of 1.0mm² two conductor wire
  Fast and easy mounting out of site
• 5-year warranty
  Your guarantee of dependable operation

Specifications:

• Switch rating: 10.1 amps at 125/250 VAC
• Wiring: MC2: Typically interupts the common ground wire between the solenoid valves and the controller.
• Included: 7.6m of 1.0mm² two conductor wire, two mounting screws, controller identification label and detailed instructions
• UL listed

Bypass switch box: give any automatic controller’s remote sensors the capability to bypass. It’s the easy way to put a system in the manual mode as would be needed during servicing and troubleshooting operations. Features a compact, heavy-duty switch mechanism, the Bypass Switch Box mounts quickly and easily with it’s no-strip wire connectors and supplied adhesive tape

Description:

If the thought of running wires from a controller has kept you from adding rain sensors to your systems, now there’s a hassle-free alternative. The Hunter Wireless Rain-Clik™ attaches quickly and easily – simply install the transmitter anywhere that the device can receive representative rainfall. No ladders needed to attach to a high outcropping on a building, no messy wires to hide out of view. What also sets a Hunter Rain-Clik™ apart are features no other rain-sensing device offers. The unique Quick Response™ feature allows the product to shut off immediately when it starts to rain. And, unlike its competition, Hunters sophisticated sensing mechanism cannot be
fouled by debris, giving the Wireless Rain-Clik™ the most highly accurate operation.

Features:

• Hassle free, wire-free easy installation:
  Simple to add on to a new or existing installation
• Hunter’s unique Quick Response™ feature:
  No need for water to accumulate for shutoff.
• Modular mounting options:
  Variety of choices depending on the job site; gutter or wall mounts.
• Set a maximum dry-out period:
  Adjust the irrigation re-start to account for varying amount of rain.
• Operates up to 300′ from the reciever unit:
  Typical wired system limitations vanish.
• Maintenance-free patented sensing mechanism:
  Built-in bypass switch on receiver panel.
• Retrofit with ease:
  Installs on any system in minutes, no stringing or wiring.

Specifications:

• Wiring: normally closed or normally open
• Time to turn off irrigation system: 2 to 5 minutes for Quick Response
• Time to reset Quick Response unit: 4 hours maximum under dry sunny conditions
• Time to reset: 3 days maximum under dry sunny conditions for the total rainfall compensation unit
• Operating temperature: 0°C to 54°C
• Vent ring allows for adjustment of reset delay
• UV colourfast and stable
• UL listed, FCC/DOC approved, suitable for use in Australia, CUL (CSE), CE
• Rain sensor transmitting range: up to 300 feet line of sight

Electrical Specifications:

• Receiver power: 22-28VAC/VDC, 100mA (from timer transformer)
• Receiver includes built-in bypass switch, no extra switch requuired
• Works with all standard controllers

The RX-1, a rain switch developed for use with 24V output sprinkler controllers to interrupt the scheduled watering cycle in the event of rain. The RX-1 mounts easily to a gutter or wall.

Features:

• UL listed Micro Switch.
• Three wires for compatibillity with most sprinkler controllers. Blue wire used for normal open situations.
• UV protected material.

Mechanical Specifications:

Materials: ABS with UV inhibitors.
Approvals: UL® listed.
Five rainfall settings: 3mm, 6mm,12mm, 18mm, 25mm
Vent Ring: Adjustable to varying drying times for hydroscopic disc set.

The Hunter X-Core Controller is the most popular automatic controller for residential homes and gardens.

Number of stations: 4, 6, 8
Type: Fixed
Enclosures: Indoor and outdoor
Independent programs: 3
Start times per program: 4
Max. station run time: 4 hrs
Warranty period: 2 years

Save water and money by installing a Solar Sync weather sensor.

• Cycle and Soak
• Seasonal Adjust
• Water -saving features

With its advanced features, the new TEMPUS™ DC is the ideal controller to manage irrigation in areas without electricity. Bluetooth connectivity is integrated to allow intuitive programming with the new mobile Toro App. TEMPUS™ DC is available in two versions: with and without LCD screen.

• Rated IP68, 100% Waterproof. The TEMPUS™ DC can be installed directly in the valve box.
• Bluetooth Smart connectivity is integrated to allow intuitive programming from your device with the new TEMPUS™ DC App.
• Water budget from 0% to 200%. The watering times can be easily set up for the whole year and then adjusted by percentage from 0% to 200% with increments of 10%. Intelligent programming with easy seasonal adjustment.
• Large display for LCD model: 45 mm x 60 mm. This practical LCD display is the largest on the market for this product line and will allow you to easily program the controller.

Specifications

Power
Battery operated. TEMPUS DC: 9 V battery; TEMPUS DC-LCD: 4 x AAA batteries

Dimensions
TEMPUS™ DC: 120 mm x 115 mm x 50 mm (W x H x D) / TEMPUS™ DC-LCD: 105 mm x 155 mm x 50 mm (W x H x D)

Weight
TEMPUS™ DC: 250 g / TEMPUS™ DC-LCD: 260 g

Number of Stations
1, 2 or 4 Stations

Number of Programs
4 Independent programs. Permanent memory

Number of Start Times
3 Start times per program

Run Time
Watering time from 1 minute to 8 hours (1 min increase)

Programming Options
Flexible irrigation programming: Daily; Weekly; Irrigation on even and odd days; Irrigation at 1 to 31 day intervals

Enclosures
Rated IP68, 100% waterproof UV-resistant plastic case

Output Power
Output 9 VDC latching

Operating Temperature
Operating temperature: -10 °C to 50 °C

Wired
Toro TRS Wired RainSensor™; Toro TRFS Wired Rain/Freeze Sensor

Wireless
Toro TWRS Wireless RainSensor™

Wireless Rain/Freeze
Toro TWRFS Wireless Rain/Freeze Sensor

Battery
Battery operated. TEMPUS DC: 9 V battery; TEMPUS DC-LCD: 4 x AAA batteries