Solvents

18
Yes
None
1
Search...
/products/solvents/
0 items in cart
or empty cart
Thumbnail
Filter
Sort By:

Categories:

Solvents
Christy’s Red Hot Blue Glue
Christy’s Red Hot Blue Glue Image

Application

Red Hot Blue Glue™ is for use on all types of PVC plastic pipeapplications, Type I and Type II. It is approved for pressure and non-pressure, potable and non-potable, water, turf, ag, conduit, foam core, sewer, DWV and flexible PVC piping. In high pressure, large diameter or very demanding applications, use of purple primer is recommended. Installation instructions are located on each can as well as in our installation brochure. We recommend that you also follow the pipe and fitting manufacturers directions in conjunction with our instructions to insure a viable joint. Red Hot is considerd a fast setting solvent cement, work quickly to assure a quality joint.

Specifications and Industry Listings:

  • Red Hot Blue Glue™ is a mixture of 100% active solvents, PVC resin and colorant dye. Red Hot Blue Glue™ is listed by the International Association of Plumbing & Mechanical Officials (IAPMO) and carries the UPC Shield. It is additionally listed by NSF International for use on potable water, sewer, drain, waste and vent systems and carries the NSF symbol and exceeds ASTM D-2564.
  • Colour: Deep Blue
  • Viscosity (Brookfield): Minimum 500cps @ 22°C
  • Specific Gravity: 0.94±0.040
  • Max VOC Emissions: 650 G/L, per SQCAQMD Rule 1168, Method 316A.

Special Considerations:

For safety and health precautions please consult our Material Safety Data Sheet on thios product. Always use in a well-ventilated environment. Never test with compressed gas or air. for solvent cementing in very cold conditions, please consult our cold weather guidelines. Always wear safety gloves and avoid spills.

Description:

Red Hot Blue Glue™ is a very aggressive, blue, medium bodied, fast setting PVC solvent cement. It is chemically the “hottest” solvent cement formulation available on the market today. It is designed to be used on all schedules and classes of PVC pipe through 200mm, schedule 80 through 100mm. Red Hot is ideal for both quick pressurisation and demanding conditions. Red Hot is our best solvent for all PVC applications through 200mm, including wet or cold condition applications. Red Hot does not require the use of a purple primer, unless specified by local code.

Packaging and Handling:

The “shelf life” of Red Hot Blue Glue™ is 3 years in an unopened can from the date stamped on the can. Always seal the can tightly between uses, to prevent the solvent from becoming thickened, stringy or jelled. If the solvent becomes thickened, stringy or jelled, dispose of it properly, it cannot be “re-activated” or thinned.

IPS Weld-On C-65 Cleaner
IPS Weld-On C-65 Cleaner Image

Application

Weld-On C-65 Cleaner is a clear, reduced VOC emissions, water-thin, free flowing solvent system. It is specifically formulated to remove grease, oil and dirt from the bond surfaces of PVC, CPVC, ABS and Styrene pipe and fittings. It is approved for FlowGuard® Gold™ CTS plumbing systems. It is not to be used in place of primer.

Weld-On C-65 is an all purpose cleaner and can be used on all sizes, classes and schedules of PVC, CPVC, ABS and Styrene pipe and fittings. It is to be used only as a cleaner, in conjunction with the appropriate primer and/or cement combination. It also has been used as a brush cleaner.

Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructions supplied by the pipe and fitting manufacturer.

Specifications

  • Colour: Grey
  • Resin: PVC
  • Specific Gravity: 0.946± 0.040
  • Brookfield Viscosity: Minimum 2000 cps @ 73±2ºF
  • Max VOC Emissions: 600G/L per SCAQMD Rule 1168, Method 316A

Shelf Life

The shelf life expectancy of this product in tightly sealed containers is unlimited. Stability of the product is limited by the permanence of the container and the evaporation of the solvent when container is open.It should be used as received in its original container. Adding of solvents or other foreign materials is not recommended.

Standards and Approvals:

Weld-On C-65 meets SCAQMD Rule 1168/316A

Important Note:

This product is intended for use by skilled individuals at their own risk. These suggestions and data are based on information we believe to be reliable. Installers should verify for themselves that they can make satisfactory joints under varying conditions. Toward this end, it is highly desirable that they receive personal instruction from trained instructors or competent, experienced installers. Contact us or your supplier for additional information or instruction.

DANGER – EXTREMELY FLAMMABLE – VAPOUR HARMFUL
MAY BE HARMFUL IF SWALLOWED – MAY IRRITATE SKIN OR EYES

IPS Weld-On Solvent 767
IPS Weld-On Solvent 767 Image

Application

Weld-On 2767 is a green, medium bodied, fast set, very high strength solvent cement for cementing all schedules and classes of PVC pressure and non-pressure pipe and fittings through 150mm.

Weld-On 2767 is for use on all types of PVC plastic pipe applications, Type I and Type II. It is suitable for use on potable and non-potable water pipe, turf irrigation pipe, conduit, duct, sewer and drain, waste and vent systems.

Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructios supplied by the pipe and fitting manufacturer.

Specifications

  • Colour: Green
  • Resin: Must be virgin PVC
  • Specific Gravity: 0.955± 0.040
  • Brookfield Viscosity: Minimum 400-800 cps @ 23°±1.7ºC

Shelf Life

3 years expectancy in tightly sealed containers. The date of manufacture is stamped on the bottom of the container. Stability of the product is limited by the permanence of the container and the evaporation of the solvent when container is open. Evaporation of solvent will cause the cement to thicken and reduce its effectiveness. Adding thinners to change the viscosity is not recommended.

Standards and Approvals:

Weld-On 2767 meets ASTM D 2564 and the requirements of the Australian/New Zealand standard (AS?NZS) 3879 for Type P solvent cement.

Dangerous Goods Shipping Information:

  • Proper Shipping Name: Adhesives
  • DOT/IATA Hazard Class: 3
  • IMO Hazard Class: 3.2
  • Identification Number: UN 1133
  • Packaging Group: II
IPS Weld-On Solvent 725
IPS Weld-On Solvent 725 Image

Application

Weld-On Wet ‘R Dry 725 is an aqua blue, medium bodied, extremely fast setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings with interference fit through 150mm diameter, Schedule 80 through 100mm diameter. Can be used without primer on non-pressure systems if local codes permit.

Weld-on Wet ‘R Dry 725 is for use on rigid and flexible PVC pipe and fittings. It is specially formulated for applications where conditions are very wet and/or quick pressurisation is neccessary, use only Wet ‘R Dry P-75 Primer with Wet ‘R Dry Cement.

Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructios supplied by the pipe and fitting manufacturer.

NOTE: IPS Weld-On solvent cements must never be used in a PVC system using or being tested by compressed air or gases.

Specifications

  • Colour: Aqua Blue
  • Resin: PVC
  • Specific Gravity: 0.924± 0.040
  • Brookfield Viscosity: Minimum 600 cps @ 73±2ºF
  • Max VOC Emissions: 600G/L per SCAQMD Rule 1168, Method 316A

Shelf Life

3 years expectancy in tightly sealed containers. The date of manufacture is stamped on the bottom of the container. Stability of the product is limited by the permanence of the container and the evaporation of the solvent when container is open. Evaporation of solvent will cause the cement to thicken and reduce its effectiveness. Adding thinners to change the viscosity is not recommended.

Standards and Approvals:

Weld-On Wet ‘R Dry meets ASTM D-2564 and is listed by NSF International for use on potable water, sewer, drain, waste and vent (DWV) systems. It is listed by the International Association of Plumbing & Mechanical Officials (IAPMO) and carries the Uniform Plumbing Code (UPC) seal. This cement is suitable for use with PVC piping systems approved by (SBCC) Southern Building Code Congress and (BOCA) Building Officials Congress of America.

Important Note:

This product is intended for use by skilled individuals at their own risk. These suggestions and data are based on information we believe to be reliable. Installers should verify for themselves that they can make satisfactory joints under varying conditions. Toward this end, it is highly desirable that they receive personal instruction from trained instructors or competent, experienced installers. Contact us or your supplier for additional information or instruction.

DANGER – EXTREMELY FLAMMABLE – VAPOUR HARMFUL
MAY BE HARMFUL IF SWALLOWED – MAY IRRITATE SKIN OR EYES

IPS Weld-On Solvent 711
IPS Weld-On Solvent 711 Image

Application

Weld-On 711 is a grey, heavy bodied, medium setting, high ips-weld-on-pvc-711strength PVC solvent cement for all classes and schedules of pipe and fittings through 300mm diameter, including Schedule 80. It has good gap filling properties and its medium set allows more working time in warm weather. Weld_on 711 is for use on all types of PVC plastic pipe applications, Type I and Type II. Water pressure systems, irrigation, turf, conduit, industrial pipe applications, sewer, drain, waste and vent systems. Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructios supplied by the pipe and fitting manufacturer. NOTE: IPS Weld-On solvent cements must never be used in a PVC system using or being tested by compressed air or gases.

Specifications

  • Colour: Grey
  • Resin: PVC
  • Specific Gravity: 0.946± 0.040
  • Brookfield Viscosity: Minimum 2000 cps @ 73±2ºF
  • Max VOC Emissions: 600G/L per SCAQMD Rule 1168, Method 316A

Shelf Life

3 years expectancy in tightly sealed containers. The date of manufacture is stamped on the bottom of the container. Stability of the product is limited by the permanence of the container and the evaporation of the solvent when container is open. Evaporation of solvent will cause the cement to thicken and reduce its effectiveness. Adding thinners to change the viscosity is not recommended.

Standards and Approvals:

Weld-On 711 meets ASTM D-2564 and is listed by NSF International for use on potable water, sewer, drain, waste and vent systems. It is listed by the International Association of Plumbing & Mechanical Officials (IAPMO) and carries the Uniform Plumbing Code (UPC) seal. Weld-On 711 is listed by the Canadian Standards Association (CSA) for pressure and non-pressure applications. This cement is suitable for use with PVC piping systems approved by (SBCC) Southern Building Code Congress and (BOCA) Building Officials Congress of America.

Important Note:

This product is intended for use by skilled individuals at their own risk. These suggestions and data are based on information we believe to be reliable. Installers should verify for themselves that they can make satisfactory joints under varying conditions. Toward this end, it is highly desirable that they receive personal instruction from trained instructors or competent, experienced installers. Contact us or your supplier for additional information or instruction.

DANGER – EXTREMELY FLAMMABLE – VAPOUR HARMFUL
MAY BE HARMFUL IF SWALLOWED – MAY IRRITATE SKIN OR EYES

Christy’s Slick-Wrap
Christy’s Slick-Wrap Image

Description

Slick Wrap is a specially formulated fibreglass tape designed to christys-slick-wraprepair water lines, sewer lines and fluid lines.

Application

Slick Wrap can be applied to all types of pipes including PVC, Cast Iron, Galvanised and Poly. Slick Wrap can be used for sewer, irrigation, and chemical lines.

Features

Form Impregnated Fibreglass Cloth
Colour Grey
Fabrication Method Wet Lay-up
Number of Wraps required 8 (minimum) for High Pressure
Cure cycle @ 21°C 30 minutes (wet)
Hardness – cured laminate 53 Barcol
Heat resistance 647°C
Line pressures 2067kPa
Christy’s Ultra Seal
Christy’s Ultra Seal Image

Application

Ultra Seal™ is suitable for most plastic applications, including PVC,CPVC, ABS, Delrin®, Zytel®, fibreglass, Nylon, Polypropylene, Polyethylene, Celcon®, Cycolac® and all types of metal applications. Ultra Seal™ is suitable for systems carrying:

ACIDS, DILUTED ETHANOL LP GASES
Ammonia Fatty Acids Liquid Soap
Aliphatic Solvents Freons (All) Liquid Sugar
Butane Gasohol Methanol
Brine Gasoline Mineral Oils
Castor Oils Glycol Natural Gas
Carbon Dioxide Gaseous helium Naphtha
Chlorinated Water Heating Oils Nitrogen Gas
Compressed Air Hydraulic Oils Propane
Coal Tar Naphtha Hydrogen Refrigeration Gases
Corrosives Inert Gases Steam
Cutting Oils Jet Fuel Vegetable Oils
Diesel Fuel Oil Kerosene Water (Including Reclaimed)
Diluted Alkalis Lacquer Xylol

 

  • Ultra Seal™ does not require any set or cure time, the system may be pressurised immediately after assembly.
  • Ultra Seal™ is suitable for use in the following temperature ranges:
  • Gases: -45°C to 204°C
  • Liquids: -45°C to 204°C
  • Ultra Seal™ will remain bruashable to -45°C

Product Type

Teflon Thread Sealing Compound

Description:

Ultra Seal™ is a white, brushable, grit-free, smooth paste. Ultra Seal™ is an all-purpose thread sealing compound, containing Teflon® for easier assembly/disassembly. Ultra Seal™ will provide a leak-free seal on most types of metal and plastic threaded applications. Ultra Seal™ is non-toxic, non-seizing, and nonhardening. Ultra Seal™ will not transfer any taste or odour and is non-corrosive. Ultra Seal™ contains an anti-galling compund and will allow for easy assembly after years of service.

Pressure Range:

  • Ultra Seal™ will seal gas applications up to 6890kPa and liquids up to 10000kPa.
  • All temperature, pressure and service recommendations constitute a recommendation only, and do not create an application warranty.
Christy’s Purple Primer
Christy’s Purple Primer Image

Application

Apply Purple Primer™ prior to applying solvent cement to both surfaces. Proper Purple Primer™ application is critical, it should be “scrubbed” into both the pipe and fitting surfaces – both cleaning and softening both surfaces. Christy’s™ Purple Primer™ can be used for all types of PVC plastic pipe applications, Type I and Type II as well as CPVC applications. It is approved for pressure and non-pressure, potable and non-potable, water, turf, ag, conduit, foam core, sewer and DWV PVC apllications. Installation instructions are located on each can as well as in our installation brochure. We recommend that you also follow the pipe and fitting manufacturers directions in conjunction with our instructions to insure a viable joint.

Description:

Purple Primer™ is a purple, thin-bodied, very aggressive, veryfast acting industrial grade PVC/CPVC primer. It is a distinct purple in colour to assure the entire mating surfaces have been primed. It is designed to be used on all schedules and classes of PVC and CPVC.
Specifications and Industry Listings:

  • Purple Primer™ is a mixture of 100% active solvents and colorant dye, there are no resins or fillers in the product.
    Purple Primer™ is listed by the International Association of Plumbing & Mechanical Officials (IAPMO) and carries the UPC Shield. It is additinally listed by NSF International for use on potable water, sewer, drain, waste and vent systems and carries the NSF symbol and exceeds ASTM F-656.
  • Colour: Purple
  • Viscosity (Brookfield): Water Thin
  • Specific Gravity: 0.87±0.040
  • Max VOC Emissions: 650 G/L, per SQCAQMD Rule 1168, Method 316A.
  • Purple Primer™ is approved for use in the SCAQMD and related distric areas for solvent weld applications requiring primer.

Special Considerations:

For safety and health precautions please consult our Material Safety Data Sheet on thios product. Always use in a well-ventilated environment. Never test with compressed gas or air. for solvent cementing in very cold conditions, plese consult our cold weather guidelines. Always wear safety gloves and avoid spills.

Christy’s Amigo
Christy’s Amigo Image

Application

Amigo™ is for use on all types of PVC plastic pipe applications,Type I and Type II. It is approved for pressure and non-pressure, potable and nonpotable, water, turf, ag, conduit, foam core, sewer, DWV and flexible PVC piping. Installation instructions are located on each can as well as in our installation brochure. We recommend that you also follow the pipe and fitting manufacturers directions in conjunction with our instructions to insure a viable joint. We recommend the use of a primer with Amigo™, especially on pressure applications, we recommend our Purple Primer™.

Description:

  • Amigo™ is a clear, regular bodied, fast setting PVC solvent cement.
  • Amigo™ is designed to be used on all schedules of PVC pipe through 100mm diameter, except Schedule 80. We recommend the use of purple primer with Amigo™.

Specifications and Industry Listings:

  • Amigo™ is a mixture of 100% active solvents and PVC resin. Amigo™ is listed by the International Association of Plumbing & Mechanical Officials (IAPMO) and carries the UPC Shield. It is additinally listed by NSF International for use on potable water, sewer, drain, waste and vent systems and carries the NSF symbol and exceeds ASTM D-2564.
  • Colour: Clear
  • Viscosity (Brookfield): Minimum 100cps @ 22°C
  • Specific Gravity: 0.90±0.040
  • Max VOC Emissions: 600 G/L, per SQCAQMD Rule 1168, Method 316A.

Special Considerations:

For safety and health precautions please consult our Material Safety Data Sheet on thios product. Always use in a well-ventilated environment. Never test with compressed gas or air. for solvent cementing in very cold conditions, please consult our cold weather guidelines. Always wear safety gloves and avoid spills.

Packaging and Handling:

The “shelf life” of Amigo™ is 3 years in an unopened can from the date stamped on the can. Always seal the can tightly between uses, to prevent the solvent from becoming thickened, stringy or jelled. If the solvent becomes thickened, stringy or jelled, dispose of it properly, it cannot be “re-activated” or thinned.

IPS Weld-On P-68 Primer
IPS Weld-On P-68 Primer Image

Application

Weld-On P-68 Primer is a purple or clear, reduced VOC emissions,nonbodied, fast acting, water-thin solvent. It is distinctly coloured purple so detection of its use in a joint can be made. The strong action of P-68 Primer softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings very rapidly.

Weld-On P-68 Primer, when used in conjunction with appropriate Weld-On cements, will make consistently strong, well fused joints. It is essential that the joining surfaces of pipe and fittings be softened prior to assembly. The main function of this primer is to expedite the penetration and softening of thee surfaces. Its rate of penetration into the joining surfaces is much more rapid than that of cement alone. It is suitable for use with all types, classes and schedules of PVC and CPVC pipe and fittings.

Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructions supplied by the pipe and fitting manufacturer.

Specifications

  • Colour: Purple or clear
  • Specific Gravity: 0.845± 0.040
  • Viscosity: Water-thin
  • Max VOC Emissions: 650G/L per SCAQMD Rule 1168, Method 316A

Shelf Life

3 year expectancy in tightly sealed containers. The date of the manufacturer is stamped on the bottom of the container. Stability of the product is limited to the permanence of the container and the evaporation of the solvent when container is open.

Standards and Approvals:

Weld-On P-68 meets ASTM F-656, SCAQMD Rule 1168/316A and is listed by NSF International for use on potable water, sewer, drain, waste and vent systems. P-68 Purple only is listed by the International Association of Plumbing & Mechanical Officials (IAPMO) and carries the Uniform Plumbing Code (UPC) seal. This primer is suitable for use with PVC and CPVC piping systems approved by (SBCC) Southern Building Code Congress and (BOCA) Building Officials Congress of America.

Important Note:

This product is intended for use by skilled individuals at their own risk. These suggestions and data are based on information we believe to be reliable. Installers should verify for themselves that they can make satisfactory joints under varying conditions. Toward this end, it is highly desirable that they receive personal instruction from trained instructors or competent, experienced installers. Contact us or your supplier for additional information or instruction.

DANGER – EXTREMELY FLAMMABLE – VAPOUR HARMFUL
MAY BE HARMFUL IF SWALLOWED – MAY IRRITATE SKIN OR EYES

Solvents
Christy’s Red Hot Blue Glue Image
Christy’s Red Hot Blue Glue
Application Red Hot Blue Glue™ is for use on all types of PVC plastic pipeapplications, Type I and Type II. It is approved for pressure and non-pressure, potable and non-potable, water, turf, ag, conduit, foam c... Read More
IPS Weld-On C-65 Cleaner Image
IPS Weld-On C-65 Cleaner
Application Weld-On C-65 Cleaner is a clear, reduced VOC emissions, water-thin, free flowing solvent system. It is specifically formulated to remove grease, oil and dirt from the bond surfaces of PVC, CPVC, ABS an... Read More
IPS Weld-On Solvent 767 Image
IPS Weld-On Solvent 767
Application Weld-On 2767 is a green, medium bodied, fast set, very high strength solvent cement for cementing all schedules and classes of PVC pressure and non-pressure pipe and fittings through 150mm. Weld... Read More
IPS Weld-On Solvent 725 Image
IPS Weld-On Solvent 725
Application Weld-On Wet ‘R Dry 725 is an aqua blue, medium bodied, extremely fast setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings with interference fit through 150mm ... Read More
IPS Weld-On Solvent 711 Image
IPS Weld-On Solvent 711
Application Weld-On 711 is a grey, heavy bodied, medium setting, high ... Read More
Christy’s Slick-Wrap Image
Christy’s Slick-Wrap
Description Slick Wrap is a specially formulated fibreglass tape designed to ... Read More
Christy’s Ultra Seal Image
Christy’s Ultra Seal
Application Ultra Seal™ is suitable for most plastic applications, including PVC,CPVC, ABS, Delrin®, Zytel®, fibreglass, Nylon, Polypropylene, Polyethylene, Celcon®, Cycolac® and all types of metal applications. Ultra Seal?... Read More
Christy’s Purple Primer Image
Christy’s Purple Primer
Application Apply Purple Primer™ prior to applying solvent cement to both surfaces. Proper Purple Primer™ application is critical, it should be “scrubbed” into both the pipe and fitting surfaces – both c... Read More
Christy’s Amigo Image
Christy’s Amigo
Application Amigo™ is for use on all types of PVC plastic pipe applications,Type I and Type II. It is approved for pressure and non-pressure, potable and nonpotable, water, turf, ag, conduit, foam core, sewer, D... Read More
IPS Weld-On P-68 Primer Image
IPS Weld-On P-68 Primer
Application Weld-On P-68 Primer is a purple or clear, reduced VOC emissions,nonbodied, fast acting, water-thin solvent. It is distinctly coloured purple so detection of its use in a joint can be made. The strong a... Read More