
Applications
- General water transfer and borehole applications.
- Particularly suited to low volume high pressure work.
- Stock watering, homestead and domestic water supplies.
Features
- Positive displacement pumps for outputs to 2.2 litres per second.
- Australian designed and manufactured
- Simplicity of design and reliable operation.
- Wide operating speed range for variable output.

For all general water supply from 100mm or larger Boreholes. Providing exceptional quality, hydraulic design, efficiency for reduced running costs, with optimum wear and corrosion resistance.
Applications
- Domestic
- Industrial
- Stock Watering
- Fire Fighting
- Irrigation
- Pressure Boosting
Features
- Heavy Duty Stainless Steel Pump Enclosure
- Polycarbonate Pump Element
- Choice of Stainless Steel or Bronze Pump inlet and outlet.
- Non-Return valve and inlet strainer included.
- Franklin or Coverco Stainless Steel Motors
- Capacities to 6 litres/sec.
- Heads to 320m.

Capacity
- 0.5 Litres per second against discharge head of up to 12m, and with a suction lift not exceeding 7.5m.
Specification
- Suction – screwed 25NB (1″ BSP) female.
- Discharge – scrwed 20NB (3/4″ BSP) female.
- Body – Cast Iron

ISO Pro Centrifugal
Applications
- Designed for heavy duty industrial use, including belt drive applications.
- General water transfer in processing plants, mines, construction sites and irrigation.
Features
- Heavy duty oil lubricated taper roller bearings.
- Australian designed and manufactured
- Superior hydraulic design & manufacturing methods produce significantly higher efficiencies for lower running costs and reduced maintenance.
- Wide range of options available
- Australia wide backup
- ISO 9001 quality assured
- Heads to 160 metres
- Up to 250 litres per second discharge

Australian Made to ISO 2858 Standard
Applications
Designed for efficient and reliable general purpose water transfer in industry, building services and irrigation.
Features
- Superior hydraulic design & manufacturing methods produce significantly higher efficiencies for lower running costs and reduced maintenance.
- Australian designed and manufactured.
- Up to 250 litres per second discharge
- World-wide service and backup.
- ISO 9001 quality assured.
- 32 to 200mm discharge.
- Wide range of options.
- Heads to 160 metres.

Southern Cross Turbine Pumps suit boreholes of 152mm (6 inch) casing or larger and have capacities of 4 to 63 litres per second (3,000 to 50,000 gallons per hour).
Features
- Non-corrosive pump is of all gunmetal construction with stainless steel drive shaft and couplings.
- For installations where conditions will allow, cast iron pumps can be supplied giving less expensive units.
- Enclosed impellers are less subject to wear, allow easier adjustments when installing, and do not need continual adjustment to maximum efficiency.
- Water lubricated neoprene rubber bearings for drive shaft in every stage of pump, and every 1.5m of column pipe.
- Water lubricated bearings and highly polished stainless steel shaft result in very low power loss due to friction.
- Non-reserve ratchet in driving heads prevents the pump from turning backwards and causing damage.
- Packing gland in discharge head easily accessible for occasional servicing.
- Interchangeability of spare parts assured by high manufacturing standards.

Applications
- Domestic Water Boosters
- Sprinklers / Firefighting
- Water Treatment Plants
- Seawater Pumping
- Chemical / Processing
- Food Processing
- Irrigation
Features
- Heavy duty, high quality, all wetted parts grade 304 stainless steel
- High efficiency, long working life and low maintenance
- Standard TEFC motor to IP55
- Low noise operation
- Vertical design saves floor space
- Mechanical seal to DIN24960.

Applications
The “NA” Submersible Pumps provide the quality, durability and reliability for vital community water supplies, large rural irrigation schemes, turf watering installations and stock watering plants which source water from underground supplies. Suitable also for industrial applications including dewatering of mines and excavations, sump drainage and in-line pressure boosting. Can operate anywhere from vertical to horizontal where there is sufficient water to fully immerse the unit.
Features
- High pumping efficiency for reduced running costs.
- Highest quality phosphor bronze and stainless steel construction for corrosion resistance and durability.
- Suitable for installation in boreholes from as small as 150mm inside diameter, these units use motors of 5.5 to 55 kW and deliver up to 55 litres per second. Heads up to 300 metres.
- Rigid connection between motor and pump provides a single, perfectly aligned unit.
- Impeller trimming allows exact matching of pump duty points to maximise efficiency and minimise power costs.
- Australian made for guaranteed spare parts availability.

- Inbuilt Jet and Multistage “Multiflow”
- Model SPNS045ST, 25mm F inlet and outlet, 0.50 kW (In-Built Jet – shallow well self-priming)
- Model SPNS055ST, 25mm F inlet and outlet, 0.50 kW (3 Stage)
- Model SPNS075ST, 25mm F inlet and outlet, 0.60 kW (4 Stage)
- Model SPNS095ST, 25mm F inlet and outlet, 0.60 kW (3 Stage)
- Stainless steel pump housing
- Single Impeller “Multiflow”
- Model SPN090S, 25mm F inlet and outlet, 0.75 kW
- Model SPN120S, 32mm F inlet, 25mm F outlet, 1.10 kW
- Twin Impeller “Multiflow”
- Model SPN090S, 32mm F inlet, 25mm F outlet, 1.10 kW
- Model SPN160S, 40mm F inlet, 25mm F outlet, 1.50 kW
- Model SPN180T, 40mm F inlet, 25mm F outlet, 2.20 kW (415 Volts – All 415V units must be wired with correctly rated thermal overload by a licensed electrical contractor).
Quick Selection Table

Applications
- General water transfer and borehole applications.
- Particularly suited to low volume high pressure work.
- Stock watering, homestead and domestic water supplies.
Features
- Positive displacement pumps for outputs to 2.2 litres per second.
- Australian designed and manufactured
- Simplicity of design and reliable operation.
- Wide operating speed range for variable output.

Applications
- Positive displacement helical rotor type pumps for the transfer of a variety of liquids including:
- Water
- Soft Macerated Sewerage
- Soft Abattoir Effluent
- Animal and Vegetable Oils
- Piggery Effluent
- Slurries
Features
- Pump to high heads or over long distances
- High efficiency, low maintenance.
- Constant non-pulsating discharge in either direction
- Low power and running costs
- Wide operating speed range for variable output
- Australian designed and manufactured.
- Up to 19 litres per second discharge
- Heads to 120 metres
- 40 to 100mm flanged connections

Applications
- Private and public water supply
- Sprinkler and drip Irrigation
- Booster pumping
- Fire fighting
- Fountains and water features
- Industrial Appications
- Rural Supplies.
Features
- Heavy duty, high quality construction, cold pressed 304 stainless
- Heavy duty top bearing (NBR + 304 stainless steel) with an
- intermediate bearing at each stage.
- Robust shaft and shaft coupling
- Rugged cable guard
- Discharge chamber with inbuilt reliable check valve for low head loss.
- Resistant to corrosion and abrasion
- Simple maintenance with easy dismantling and assembly
- Easy to replace natural rubber wear rings and bearings
- Optimized hydraulic profiles for high operating efficiencies.












Further Information
More information regarding Southern Cross pumps can be found by clicking here.