Solvents & Adhesives

For more information of the range of Solvents & Adhesives that we have in store, please contact our friendly staff at Allabout Pumps & Pipes.

57
Yes
None
1
1000000
/solvents-and-adhesives-2/
0 items in cart
or empty cart
Thumbnail
Filter
Sort By:

Categories:

Sub-Categories:

Solvents & Adhesives
Christy's Red Hot Blue Glue
CInquire
yDetails
Christy

Christy’s Red Hot Blue Glue® is a very aggressive, blue, medium bodied, fast setting PVC solvent cement. It is chemically the “hottest” solvent cement formulation available on the market today. It is designed to be used on all schedules and classes of PVC pipe and fittings through 150mm sizing.

Features:
Red Hot Blue Glue is the easiest-to-use and most reliable solvent cement for irrigation
Fast setting for quick pressurization.
Excellent viscosity for uniform coverage and “no blown joints”.
Works well in all weather conditions, wet or dry

Duct Tape UV Resistant
CInquire
yDetails
Duct Tape UV Resistant Image

Available in:

Black or Grey

48mm x 30mt

IPS Weld-On C-65 Cleaner
CInquire
yDetails
IPS Weld-On C-65 Cleaner Image

Application

Weld-On C-65 Cleaner is a clear, reduced VOC emissions, water-thin, free flowing solvent system. It is specifically formulated to remove grease, oil and dirt from the bond surfaces of PVC, CPVC, ABS and Styrene pipe and fittings. It is approved for FlowGuard® Gold™ CTS plumbing systems. It is not to be used in place of primer.

Weld-On C-65 is an all purpose cleaner and can be used on all sizes, classes and schedules of PVC, CPVC, ABS and Styrene pipe and fittings. It is to be used only as a cleaner, in conjunction with the appropriate primer and/or cement combination. It also has been used as a brush cleaner.

Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructions supplied by the pipe and fitting manufacturer.

Specifications

  • Colour: Grey
  • Resin: PVC
  • Specific Gravity: 0.946± 0.040
  • Brookfield Viscosity: Minimum 2000 cps @ 73±2ºF
  • Max VOC Emissions: 600G/L per SCAQMD Rule 1168, Method 316A

Shelf Life

The shelf life expectancy of this product in tightly sealed containers is unlimited. Stability of the product is limited by the permanence of the container and the evaporation of the solvent when container is open.It should be used as received in its original container. Adding of solvents or other foreign materials is not recommended.

Standards and Approvals:

Weld-On C-65 meets SCAQMD Rule 1168/316A

Important Note:

This product is intended for use by skilled individuals at their own risk. These suggestions and data are based on information we believe to be reliable. Installers should verify for themselves that they can make satisfactory joints under varying conditions. Toward this end, it is highly desirable that they receive personal instruction from trained instructors or competent, experienced installers. Contact us or your supplier for additional information or instruction.

DANGER – EXTREMELY FLAMMABLE – VAPOUR HARMFUL
MAY BE HARMFUL IF SWALLOWED – MAY IRRITATE SKIN OR EYES

IPS Weld-On P-68 Primer
CInquire
yDetails
IPS Weld-On P-68 Primer Image

Application

Weld-On P-68 Primer is a purple or clear, reduced VOC emissions,nonbodied, fast acting, water-thin solvent. It is distinctly coloured purple so detection of its use in a joint can be made. The strong action of P-68 Primer softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings very rapidly.

Weld-On P-68 Primer, when used in conjunction with appropriate Weld-On cements, will make consistently strong, well fused joints. It is essential that the joining surfaces of pipe and fittings be softened prior to assembly. The main function of this primer is to expedite the penetration and softening of thee surfaces. Its rate of penetration into the joining surfaces is much more rapid than that of cement alone. It is suitable for use with all types, classes and schedules of PVC and CPVC pipe and fittings.

Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructions supplied by the pipe and fitting manufacturer.

Specifications

  • Colour: Purple or clear
  • Specific Gravity: 0.845± 0.040
  • Viscosity: Water-thin
  • Max VOC Emissions: 650G/L per SCAQMD Rule 1168, Method 316A

Shelf Life

3 year expectancy in tightly sealed containers. The date of the manufacturer is stamped on the bottom of the container. Stability of the product is limited to the permanence of the container and the evaporation of the solvent when container is open.

Standards and Approvals:

Weld-On P-68 meets ASTM F-656, SCAQMD Rule 1168/316A and is listed by NSF International for use on potable water, sewer, drain, waste and vent systems. P-68 Purple only is listed by the International Association of Plumbing & Mechanical Officials (IAPMO) and carries the Uniform Plumbing Code (UPC) seal. This primer is suitable for use with PVC and CPVC piping systems approved by (SBCC) Southern Building Code Congress and (BOCA) Building Officials Congress of America.

Important Note:

This product is intended for use by skilled individuals at their own risk. These suggestions and data are based on information we believe to be reliable. Installers should verify for themselves that they can make satisfactory joints under varying conditions. Toward this end, it is highly desirable that they receive personal instruction from trained instructors or competent, experienced installers. Contact us or your supplier for additional information or instruction.

DANGER – EXTREMELY FLAMMABLE – VAPOUR HARMFUL
MAY BE HARMFUL IF SWALLOWED – MAY IRRITATE SKIN OR EYES

IPS Weld-On Solvent 711
CInquire
yDetails
IPS Weld-On Solvent 711 Image

Application

Weld-On 711 is a grey, heavy bodied, medium setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings through 300mm diameter, including Schedule 80. It has good gap filling properties and its medium set allows more working time in warm weather. Weld_on 711 is for use on all types of PVC plastic pipe applications, Type I and Type II. Water pressure systems, irrigation, turf, conduit, industrial pipe applications, sewer, drain, waste and vent systems. Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructios supplied by the pipe and fitting manufacturer. NOTE: IPS Weld-On solvent cements must never be used in a PVC system using or being tested by compressed air or gases.

Specifications

  • Colour: Grey
  • Resin: PVC
  • Specific Gravity: 0.946± 0.040
  • Brookfield Viscosity: Minimum 2000 cps @ 73±2ºF
  • Max VOC Emissions: 600G/L per SCAQMD Rule 1168, Method 316A

Shelf Life

3 years expectancy in tightly sealed containers. The date of manufacture is stamped on the bottom of the container. Stability of the product is limited by the permanence of the container and the evaporation of the solvent when container is open. Evaporation of solvent will cause the cement to thicken and reduce its effectiveness. Adding thinners to change the viscosity is not recommended.

Standards and Approvals:

Weld-On 711 meets ASTM D-2564 and is listed by NSF International for use on potable water, sewer, drain, waste and vent systems. It is listed by the International Association of Plumbing & Mechanical Officials (IAPMO) and carries the Uniform Plumbing Code (UPC) seal. Weld-On 711 is listed by the Canadian Standards Association (CSA) for pressure and non-pressure applications. This cement is suitable for use with PVC piping systems approved by (SBCC) Southern Building Code Congress and (BOCA) Building Officials Congress of America.

Important Note:

This product is intended for use by skilled individuals at their own risk. These suggestions and data are based on information we believe to be reliable. Installers should verify for themselves that they can make satisfactory joints under varying conditions. Toward this end, it is highly desirable that they receive personal instruction from trained instructors or competent, experienced installers. Contact us or your supplier for additional information or instruction.

DANGER – EXTREMELY FLAMMABLE – VAPOUR HARMFUL
MAY BE HARMFUL IF SWALLOWED – MAY IRRITATE SKIN OR EYES

IPS Weld-On Solvent 725
CInquire
yDetails
IPS Weld-On Solvent 725 Image

Application

Weld-On Wet ‘R Dry 725 is an aqua blue, medium bodied, extremely fast setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings with interference fit through 150mm diameter, Schedule 80 through 100mm diameter. Can be used without primer on non-pressure systems if local codes permit.

Weld-on Wet ‘R Dry 725 is for use on rigid and flexible PVC pipe and fittings. It is specially formulated for applications where conditions are very wet and/or quick pressurisation is neccessary, use only Wet ‘R Dry P-75 Primer with Wet ‘R Dry Cement.

Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructios supplied by the pipe and fitting manufacturer.

NOTE: IPS Weld-On solvent cements must never be used in a PVC system using or being tested by compressed air or gases.

Specifications

  • Colour: Aqua Blue
  • Resin: PVC
  • Specific Gravity: 0.924± 0.040
  • Brookfield Viscosity: Minimum 600 cps @ 73±2ºF
  • Max VOC Emissions: 600G/L per SCAQMD Rule 1168, Method 316A

Shelf Life

3 years expectancy in tightly sealed containers. The date of manufacture is stamped on the bottom of the container. Stability of the product is limited by the permanence of the container and the evaporation of the solvent when container is open. Evaporation of solvent will cause the cement to thicken and reduce its effectiveness. Adding thinners to change the viscosity is not recommended.

Standards and Approvals:

Weld-On Wet ‘R Dry meets ASTM D-2564 and is listed by NSF International for use on potable water, sewer, drain, waste and vent (DWV) systems. It is listed by the International Association of Plumbing & Mechanical Officials (IAPMO) and carries the Uniform Plumbing Code (UPC) seal. This cement is suitable for use with PVC piping systems approved by (SBCC) Southern Building Code Congress and (BOCA) Building Officials Congress of America.

Important Note:

This product is intended for use by skilled individuals at their own risk. These suggestions and data are based on information we believe to be reliable. Installers should verify for themselves that they can make satisfactory joints under varying conditions. Toward this end, it is highly desirable that they receive personal instruction from trained instructors or competent, experienced installers. Contact us or your supplier for additional information or instruction.

DANGER – EXTREMELY FLAMMABLE – VAPOUR HARMFUL
MAY BE HARMFUL IF SWALLOWED – MAY IRRITATE SKIN OR EYES

IPS Weld-On Solvent 767
CInquire
yDetails
IPS Weld-On Solvent 767 Image

Application

Weld-On 2767 is a green, medium bodied, fast set, very high strength solvent cement for cementing all schedules and classes of PVC pressure and non-pressure pipe and fittings through 150mm.

Weld-On 2767 is for use on all types of PVC plastic pipe applications, Type I and Type II. It is suitable for use on potable and non-potable water pipe, turf irrigation pipe, conduit, duct, sewer and drain, waste and vent systems.

Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructios supplied by the pipe and fitting manufacturer.

Specifications

  • Colour: Green
  • Resin: Must be virgin PVC
  • Specific Gravity: 0.955± 0.040
  • Brookfield Viscosity: Minimum 400-800 cps @ 23°±1.7ºC

Shelf Life

3 years expectancy in tightly sealed containers. The date of manufacture is stamped on the bottom of the container. Stability of the product is limited by the permanence of the container and the evaporation of the solvent when container is open. Evaporation of solvent will cause the cement to thicken and reduce its effectiveness. Adding thinners to change the viscosity is not recommended.

Standards and Approvals:

Weld-On 2767 meets ASTM D 2564 and the requirements of the Australian/New Zealand standard (AS?NZS) 3879 for Type P solvent cement.

Dangerous Goods Shipping Information:

  • Proper Shipping Name: Adhesives
  • DOT/IATA Hazard Class: 3
  • IMO Hazard Class: 3.2
  • Identification Number: UN 1133
  • Packaging Group: II
Plumma’s GREEN GLUE Solvent Cement • 250ml
CInquire
yDetails
Plumma’s GREEN GLUE Solvent Cement • 250ml Image

PHYSICAL & CHEMICAL PROPERTIES
Physical Description and Colour: Viscous Green liquid
Odour: Characteristic odour of MEK
Boiling Point: 79~81℃
Freezing/Melting Point: not tested
% Volatile: >75
Vapour Pressure: 9,500Pa @ 20℃ (based on MEK)
Vapour Density: 2.4 @ 20℃ (based on MEK)
Specific Gravity: 0.96~1.00
Water Solubility: not soluble
pH: Not Applicable
Volatility: 100%
Odour Threshold: No data
Evaporation Rate: Not Applicable
Oil/Water Coefficient: No data
Autoignition Temperature: 321℃

Titaseal PTFE Tape
CInquire
yDetails
Titaseal PTFE Tape Image

Pink

Titaseal PTFE Tape
CInquire
yDetails
Titaseal PTFE Tape Image

White

Solvents & Adhesives
CInquire
yDetails
Christy
Christy's Red Hot Blue Glue
Christy’s Red Hot Blue Glue® is a very aggressive, blue, medium bodied, fast setting PVC solvent cement. It is chemically the “hottest” solvent cement formulation available on the market today. It is designed to be used on all sch... Read More
CInquire
yDetails
Duct Tape UV Resistant Image
Duct Tape UV Resistant
Available in: Black or Grey 48mm x 30mt
CInquire
yDetails
IPS Weld-On C-65 Cleaner Image
IPS Weld-On C-65 Cleaner
Application Weld-On C-65 Cleaner is a clear, reduced VOC emissions, water-thin, free flowing solvent system. It is specifically formulated to remove grease, oil and dirt from the bond surfaces of PVC, CPVC, ABS an... Read More
CInquire
yDetails
IPS Weld-On P-68 Primer Image
IPS Weld-On P-68 Primer
Application Weld-On P-68 Primer is a purple or clear, reduced VOC emissions,nonbodied, fast acting, water-thin solvent. It is distinctly coloured purple so detection of its use in a joint can be made. The strong a... Read More
CInquire
yDetails
IPS Weld-On Solvent 711 Image
IPS Weld-On Solvent 711
Application Weld-On 711 is a grey, heavy bodied, medium setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings through 300mm diameter, including Schedule 80. It has good gap f... Read More
CInquire
yDetails
IPS Weld-On Solvent 725 Image
IPS Weld-On Solvent 725
Application Weld-On Wet ‘R Dry 725 is an aqua blue, medium bodied, extremely fast setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings with interference fit through 150mm ... Read More
CInquire
yDetails
IPS Weld-On Solvent 767 Image
IPS Weld-On Solvent 767
Application Weld-On 2767 is a green, medium bodied, fast set, very high strength solvent cement for cementing all schedules and classes of PVC pressure and non-pressure pipe and fittings through 150mm. Weld... Read More
CInquire
yDetails
Plumma’s GREEN GLUE Solvent Cement • 250ml Image
Plumma’s GREEN GLUE Solvent Cement • 250ml
PHYSICAL & CHEMICAL PROPERTIES Physical Description and Colour: Viscous Green liquid Odour: Char... Read More
CInquire
yDetails
Titaseal PTFE Tape Image
CInquire
yDetails
Titaseal PTFE Tape Image
Call Now ButtonCall Us