Metal impact sprinklers, 3/4 male or female

Applications

All overhead irrigation crops on hand lines, solid-set or mechanically moved systems.

Main features

• High water distribution with spacing up to 18 m
• Colour-coded bayonet nozzle for easy service
• Integrated stream-straightening vane for maximum range
• Totally dependable new sand and dust protection sleeve for reliable operation and durability

Metal impact sprinklers, 3/4 male or female

Applications

Overhead frost irrigation in vineyards,orchards and vegetables

Main features

• High water distribution with spacing up to 18 m
• Colour-coded bayonet nozzle for easy service
• Integrated stream-straightening vane for maximum range
• Totally dependable new sand and dust protection sleeve for reliable operation and durability

1 1/4″ Metal impact sprinkler

Applications

Wide spacing and center pivots machines.
Horse pastures, paddocks, arenas, feedlots, dust control, sod farms.

Main features

• Heavy-duty brass and stainless-steel construction for improved durability and performance.
• Corrosion resistant stainless-steel spring and shaft.
• Sprinkler construction of 3 nozzles with extended nozzle arm for wide diameter coverage at maximum performance.
• Non-clog straightening vane to ensure excellent coverage in wind conditions.

Giant sprinkler, 2″ female

Applications

Permanent or mechanized irrigation including
Pivots and travelers. Sugarcane, horse pastures, padlocks, arenas,feedlots, dust control, sod farms.

Main features

• High water distribution with spacing up to 50 m
• Slow rotation at uniform speed
• Heavy-duty brass and stainless-steel construction for improved durability and performance
• Adjustable diffuser screws for each nozzle allows stream breakage for uniform water distribution
• Sprinkler construction of 2 nozzles with extended nozzle arm for wide diameter coverage at maximum performance
• Non-clog straightening vane to ensure excellent coverage in wind conditions

Full- and part-circle giant sprinkler, 2″ female

Applications

Permanent or mechanized irrigation including pivots and travelers. Sugarcane, horse pastures, padlocks,arenas, feedlots, dust control, sod farms

Main features

• Full- and part-circle giant sprinkler, 2″ female
• Slow-return mechanism ensures safe operation
• For efficient irrigation of field edges

Metal impact sprinkler, 1/2″ male or 3/4″ female

Applications

All overhead irrigation crops on hand line

Main features

• High water distribution with spacing up to 14 m
• Durable, heavy-duty all brass construction
• Sleeve for reliable operation and durability

Application

Use 3M Brand 314 to electrically connect two or three wire ends, insulate the connection and provide a moisture resistant seal. Recommended for use with low energy underground circuit wires, Sprinkler Systems, Landscape Lighting or other moisture resistant wires for applications of less than 30 volts.

Features:

• Self stripping
• Moisture resistant seal
• Can be crimped using slip joint pliers
• Used with insulated copper conductors
• Specifications:
• U-contact tin plated brass 0.5mm thick
• Insulator flame retardent nylon
• Black cap, white body
• Temperature 105°C
• Maximum voltage 30VAC
• Sealant mineral oil base EG-3 Grease
• Voltage rating 30VAC

Wire Range:

• 0.5mm² – 1.0mm² solid or stranded copper conductors with a maximum insulation 3.8mm
• Joins 2 or 3 unstripped conductors up to 1.0mm²

Application

Use 3M Brand 316 to electrically connect two or three wire ends, insulate the connection and provide a moisture resistant seal. Recommended for use with low energy underground circuit wires, Sprinkler Systems, Landscape Lighting or other moisture resistant wires for applications of less than 30 volts.

Features:

• Self stripping
• Moisture resistant seal
• Can be crimped using slip joint pliers
• Used with insulated copper conductors

Specifications:

• U-contact tin plated brass 0.5mm thick
• Insulator flame retardent nylon
• Black cap, white body
• Temperature 105ºC
• Maximum voltage 30VAC
• Sealant mineral oil base EG-3 Grease
• Voltage rating 30VAC

Wire Range:

• 0.5mm² – 1.5mm² solid or stranded copper conductors with a maximum insulation 4mm
• Joins 2 or 3 unstripped conductors up to 1.5mm²

Application

Use part DBR, which includes a Scotchlok® Y Electrical Spring Connector, to electrically connect two or more pre-stripped copper wire ends in a pigtail application and moisture seal the connection for direct burial.

Specifications:

• Connector – steel spring, shell, flame retardent PVC insulator
• Temperature 105ºC
• Maximum voltage 30VAC
• Gel – Thixotropic callium organic complex
• Voltage rating 30VAC
• Tube – Polypropylene
• Not for use in direct ultraviolet exposure
• Do not store above 49ºC

Wire Range:

Application

Use part DBY, which includes a Scotchlok® Y Electrical Spring Connector, to electrically connect two or more pre-stripped copper wire ends in a pigtail application and moisture seal the connection for direct burial.

Specifications:

• Connector – steel spring, shell, flame retardent PVC insulator
• Temperature 105°C
• Maximum voltage 30VAC
• Gel – Thixotropic callium organic complex
• Voltage rating 30VAC
• Tube – Polypropylene
• Not for use in direct ultraviolet exposure
• Do not store above 49ºC

Wire Range:

Application

Use 3M Brand UBI to electrically connect two or three wire ends, insulate the connection and provide a moisture resistant seal. Recommended for use with low energy underground circuit wires, Sprinkler Systems, Landscape Lighting or other moisture resistant wires for applications of less than 30 volts.

Features:

• Self stripping
• Moisture resistant seal
• Can be crimped using slip joint pliers
• Used with insulated copper conductors

Specifications:

• U-contact tin plated brass
• Green cap, white body
• Temperature 105°C
• Maximum voltage 30VAC
• Sealant mineral oil base EG-3 Grease
• Voltage rating 30VAC
• Not for use in direct ultraviolet exposure

Wire Range:

• 0.5mm² solid or stranded copper conductors with a maximum insulation 2.0mm
• Joins 2 or 3 unstripped conductors up to 0.5mm²
• Do not strip wires

Full- and part-circle metal impact sprinklers, 1/2″ male or 3/4″ female

Applications

All overhead irrigation crops on hand line

Main features

• High water distribution with spacing up to 14 m
• Durable, heavy-duty all brass construction
• Sleeve for reliable operation and durability
• For efficient irrigation of field edges

Plastic impact sprinkler, 1/2 male or 3/4″ female

Applications

Irrigation and germination of vegetables, potatoes, flowers and nursery crops

Main features

• High water distribution with spacing up to 14 m
• Colour-coded bayonet nozzles for easy service
• Integrated stream-straightening vane for maximum range
• High impact heavy-duty plastic materials
  provide resistance to corrosion, chemicals and radiation

Low-volume, low-angle undertree plastic impact sprinkler, 1/2″ male

Applications

Undertree (bananas, vineyards), nurseries and greenhouses

Main features

• 9°, 12° and 14° with nozzle replacement only
• Colour-coded bayonet nozzle for easy service
• Integrated stream-straightening vane for maximum range
• High impact heavy-duty plastic materials provide resistance to corrosion, chemicals and UV

Low-volume under-tree plastic sprinkler

Applications

Undertree, nurseries, and greenhouses

Main features

• Excellent water distribution at low pressure and precipitation.
• Energy saving with wedge drive design.
• Strong penetration of foliage.
• Colour-coded plastic bayonet nozzles.

Plastic impact sprinklers, 3/4 male (5035), 1″ female (5035-G)

Applications

General field use on solid set irrigation system.

Main features

• High water distribution with spacing up to 22 m
• Colour-coded bayonet nozzle for easy service
• Integrated stream-straightening vane for maximum range
• High impact heavy-duty plastic materials provide resistance to corrosion, chemicals and radiation

Application

Commercial and residential turf landscapes.

Specifications:

• Molded, pressure activated wiper seal stops excessive flow-by and cleans stem upon completion of watering.
• Ratchet stem allows quick directional adjustment during operastion.
• Stainless steel spring on pop-up stem ensures positive retraction.
• U.V. Stabilised construction.
• Riser stem threads.
• Accepts female thread nozzles.

Operating Range

• 103 – 482kPa.
• 55kPa fully activated wiper seal.

Materials:

• Bodies: Hard drawn copper with custom internal mirror finish.
• Pistons, Threaded Adaptor and Cap: Machined of free cutting brass.
• Seal: ‘O’rings, EPDM.

Application

Complete range of compression fittings allows assembly on metric polyethylene pipes. Disassembly not required for all sizes. All components work together smoothly to guarantee a reliable and efficient joint.

Specifications

• Body, Nut, thrust ring: virgin polypropylene in master batches, UV stabilized.
• Clamp ring: Acetalic resin
• Gaskets: Food safe rubber (NBR)
• Reinforcement ring: stainless steel AISI 430
• Colour Body: Black
• Colour Nut: Blue (150year life)
• Taper male thread (pressure tight)
• Parallel female thread (pressure tight)
• Maximum pressure:
  • -20oC +20oC 15 – 63mm 1600kPa
  • -20oC +20oC 75 – 110mm 1000kPa
• Certificates: Australia (AS 4129)

Selection of 18 types from 15mm to 110mm

Application

Connecting metric poly pipe to flanged face pipework.

Specifications

• Body, Nut, thrust ring: virgin polypropylene in master batches.
• Clamp ring: Acetalic resin
• Gaskets: Food safe rubber (NBR)
• Reinforcement ring stainless steel AISI 430
• ColourBody:
  • Black
  • Nut: Blue
• Flange table D
• Temperature:
  • -20oC – +20oC 50 – 63mm 1600kPa
  • -20oC – +20oC 75 – 110mm 1000kPa
• Australian Standard AS 4129

Application

Pressure  metric poly pipe networks carrying water. Sizing from 25mm through 315mm

Specifications

• Body – Virgin polypropylene, UV stabilised
• Caskets – NBR (Food safe rubber)
• Reinforcement rings – stainless steel
• Bolts & Nuts – Galvanised (Optional stainless steel)
• All pressure pipe type PE to AS/NZ 4130
• Test standards AS/NZ 4129
• Thread standards AS 1722

Application

Transition fitting from metal to plastic for all water pipe networks.

Specifications

• Operating pressure PN16 (1600kPa)
• Male/female threads are made of nickled brass and manufactured to gas thread standard.
• Metal inserts have nut for tightening
• Suitable for use with potable water
• Body nut and thrust ring made from virgin polypropylene UV stabilised
• Clamp ring – acetalic resin
• Body colour black
• Australian standard AS 4129
• Metal threads – conical
• Female threads – cylindrical
• Certificates: Australia (Rural AS 2698-2)

Selection of 12 types from ¾” to 2″

Rural to Metric Fitting Conversion Kits available.

Application

Transition fitting from metal to plastic for all water pipe networks.

Specifications

• Operating pressure PN16 (1600kPa)Male/female threads are made of nickled brass and manufactured to gas thread standard.
• Metal inserts have nut for tightening
• Suitable for use with potable water
• Body nut and thrust ring made from virgin polypropylene UV stabilised
• Clamp ring – acetalic resin
• Body colour black
• Australian standard AS 4129
• Metal threads – conical
• Female threads – cylindrical

Application:

The Silver Bullet Series 4000 Reduced Pressure Zone Assemblies are designed to provide protection of the potable water supply in accordance with national codes. This series can be used where approved by the local authority having jurisdiction on health hazard cross connections. Series 4000 features short lay length, lightweight stainless steel body, corrosive resistant stainless steel relief valve, and patented cam-check assembly.

Features:

• Stainless steel construction provides long term corrosion protection and maximum strength.
• Stainless steel body is half the weight of competitive designs reducing installation & shipping costs
• Short end-to-end dimensions make retrofit easy.
• Patented Cam-Check Assembly provides maximum flow at low pressure drop.
• No special tools required.
• Compact construction allows for smaller enclosures.
• Stainless steel relief valve features a balanced rolling diaphragm to eliminate sliding seals and lower maintenance costs.

Materials:

• All internal metal parts: 300 Series stainless steel.
• Main valve body: 300 Series stainless steel.Check assembly: Noryl®
• Flange dimension in accordance with AWWA Class D

Pressure – Temperature:

• Temperature range: 5°C – 60°C
• Maximum Working Pressure: 1200kPA

Applications

High quality screen filter for agriculture and landscape irrigation systems.

Specifications

AG Products “Spin Clean™” filters are unique in that incoming dirty water is forced through a directional nozzle plate onto the inside of the stainless steel screen. This creates a centrifugal action which rotates debris down he screen wall to the large debris holding basin. Debris is flushed out via a ball valve or unscrewing cap. Spinning action keeps more of the screen area clean, minimizing pressure losses due to excessive dirt build-up.

Features

• 20mm and 25mm inlet/outlet
• Two piece threaded housing with ‘O’ ring seal.
• Molded from high heat and chemical resistant ABS plastic.
• Ball valve for flushing debris.
• Stainless steel filter screen.
• 20mm screen area 585mm
• 25mm screen area 710mm
• 20mm maximum size cleaning efficiency 15LPM
• 25mm maximum size cleaning efficiency 26LPM
• Maximum operating pressure 550kPA
• Mesh selection 50, 100, 150
• 20mm maximum flow 42LPM
• 25mm maximum flow 105LPM

Applications

High quality screen filter for agriculture and landscape irrigation systems.

Specifications

AG Products “Spin Clean™” filters are unique in that incoming dirty water is forced through a directional nozzle plate onto the inside of the stainless steel screen. This creates a centrifugal action which rotates debris down he screen wall to the large debris holding basin. Debris is flushed out via a ball valve or unscrewing cap. Spinning action keeps more of the screen area clean, minimizing pressure losses due to excessive dirt build-up.

Features

• 40mm and 50mm inlet/outlet
• Two piece threaded housing with ‘O’ ring seal.
• Molded from high heat and chemical resistant ABS plastic.
• Ball valve for flushing debris.
• Stainless steel filter screen.
• 40mm screen area 1.5m²
• 50mm screen area 1.5m²
• 40mm maximum size cleaning efficiency 189LPM
• 50mm maximum size cleaning efficiency 378LPM
• Maximum operating pressure 689kPA
• Mesh selection 50, 100, 150
• 40mm maximum flow 207LPM
• 50mm maximum flow 434LPM

The AstralPool CTX pump has been designed to comfortably meet the needs and pressures required by your swimming pool and spa equipment. Made from high quality materials and components the CTX is designed to produce greater efficiency and reduce noise levels. Suitable for in-floor cleaning systems, spa jets and other demanding applications the CTX will provide a high performance and reliability.

• Available in three different sizes to meet your application
• Incorporates a large lint pot requiring less maintenance
• Connects with the Genus controller system
• Reduced operating noise
• Made from quality components

High performance, high pressure

The CTX Series pump has been designed to meet your needs by delivering a much higher head pressure and overall performance than other pumps.

Saves both time and money

While meeting the demands of your equipment the CTX also moves more water, using less power in fewer hours per day. This means lower electricity costs. With the need for less frequent cleaning the CTX-Series pump will save you both time and money.

Warranty

Covered by a limited 3 year warranty against defects in materials and workmanship.

• Available in three different sizes
• Made form quality and durable components
• Whisper quiet operation
• Requires less maintenance

Perfect for small- to mid-sized pools

The E-Series pumps will provide just the right level of performance and reliability for all pools and spas up to 60,000 litres. With low noise levels the E-Series pool and spa pump produces high flow rates using less power which saves on operating costs.

Saves both time and money

Designed with high standard, reliability and durability in mind these pumps use only quality components that lead to a long life. With the need for less frequent cleaning the E-series pump will save you both time and money.

Warranty

Covered by a limited 3 year warranty against defects in materials.

Submersible drainage sump pump made from stainless steel AISI304. Shaft sealing is with double lips seals that run on a ceramic coated shaft. Suitable for most sump applications including cellars, water displays, small scale irrigation, swimming pool emptying.

Technical Data

• Flow rates from 20 – 300 litres/min
• Pressure upto 1.5bar
• 110v – 230v – 415v versions available

Complete automatic pressure boosting sets.

Many different pump models available adapted for horizontal, vertical and multistage pumps

Technical Data

• Flow rates upto 3600 litres/minute
• Pressures upto 25bar

Please contact AllAbout Pumps and Pipes for details.

Application

Agricultural, turf and home watering systems.

Features

• Full bore
• Threaded female ends BSP.
• Forged.

Specifications

• Seat: Teflon.
• Ball: Chrome plated brass.
• Handle: Stainless steel.
• Stem: Brass
• Pressure: 1050kPa Maximum.

Application

Agricultural, turf and home watering systems.

Specifications

• Sizing: 15mm – 100mm
• Female BSP threads inlet/outlet
• All brass construction
• Maximum working pressure 800kPa

Application

Agricultural, turf and home watering systems.

Features

• Full bore
• Threaded female ends BSP.
• Forged.

Specifications

• Seat: Teflon.
• Ball: Chrome plated brass.
• Handle: Stainless steel.
• Stem: Brass
• Pressure: 1050kPa Maximum.

BT1800 1,800L/400GAL

Height 1,470mm
Diameter 1,400mm
Outlet 25mm
Overflow 50mm

BT18000 18,000L/4,000GAL

Height 2,580mm
Diameter 3,350mm
Outlet 40mm
Overflow 90mm

BT22500-S 22,500 L / 5,000 GAL (Squat)

Height 2,500mm
Diameter 3,800mm
Outlet 40mm
Inlet 2,250mm
Overflow 90mm

BT22500-T 22,500L/5,000GAL (Tall)

Height 3,000mm
Diameter 3,350mm
Outlet 40mm
Overflow 90mm

BT2275 2,275L/500GAL

Height 1,770mm
Diameter 1,400mm
Outlet 25mm
Overflow 50mm

BT3000-S 3,000L/660GAL (Squat)

Height 1,500mm
Diameter 1,800mm
Outlet 25mm
Overflow 90mm

BT3000-T 3,000L/660GAL (Tall)

Height 2,100mm
Diameter 1,400mm
Outlet 25mm
Overflow 50mm

BT5000-T 5,000L/1100GAL (Tall)

Height 2,250mm
Diameter 1,800mm
Outlet 25mm
Overflow 90mm

BT600 600L/130GAL

Height 1,250mm
Diameter 870mm
Outlet 25mm
Overflow 50mm

BT900 900L/200GAL

Height 1,450mm
Diameter 1,000mm
Outlet 25mm
Overflow 50mm

BTS2000 2,000L/440GAL

Height 2,100mm
Width 1,550mm
Depth 875mm
Overflow 90mm
Outlet 25mm

BTS3000 3,000L/660GAL

Height 2,100mm
Width 2,300mm
Depth 875mm
Overflow 90mm
Outlet 25mm

BTS4000 4,000L/880GAL

Height 2,100mm
Width 2,900mm
Depth 875mm
Overflow 90mm
Outlet 25mm

BTS5000 5,000L/1,100GAL

Height 2,100mm
Width 2,300mm
Depth 1,350mm
Overflow 90mm
Outlet 25mm

Cascade jets can be used with moderate winds. These jets must be installed at a determined height due to its water level dependancy. It will increase its stream height should the water level drop (reducing its diameter), and will decrease its stream when the water level rises.

If waves are not avoided Geyser Jet will have continuous stream fluctuations.

Overflow drain, water level sensor and wave reduction system should be installed to achieve best performances.

Swivvel connection allows adjustment of inclination to allow parabolic or vertical jets.

Christy’s Red Hot Blue Glue® is a very aggressive, blue, medium bodied, fast setting PVC solvent cement. It is chemically the “hottest” solvent cement formulation available on the market today. It is designed to be used on all schedules and classes of PVC pipe and fittings through 150mm sizing.

Features:
Red Hot Blue Glue is the easiest-to-use and most reliable solvent cement for irrigation
Fast setting for quick pressurization.
Excellent viscosity for uniform coverage and “no blown joints”.
Works well in all weather conditions, wet or dry

Click-On Tap Adaptors

The Dab-102M self-priming centrifugal pump has excellent suction capacity even when there are air bubbles. It is particularly suitable for water supply in domestic installations, small scale agriculture, gardening.

Application:
The DAB 102M self-priming centrifugal Jet pump has excellent suction capacity even when there are air bubbles. It is particularly suitable for water supply in domestic installations, small scale agriculture, gardening and wherever self- priming operation is necessary.

Features:
Cast iron pump body
Motor support in cast iron
Techno polymer impeller, diffuser, venturi tube and sand guard
Stainless steel adjustment rings
Carbon/ceramic mechanical seal
Asynchronous motor closed and cooled by external ventilation
Built-in thermal and current overload protection

Specs/Performance:
Max Head 53.8m
Max Flow 60lpm
Liquid temperature range: from 0°c to +35°C for domestic use and from 0°C to +40°C for other use
Pumped liquid characteristics: clean , free from solids or abrasive substances, not viscous, not aggressive, not crystallised and chemically neutral.
Maximum ambient temperature: +40°C
Maximum working pressure: 6 bar (600 kPa)
Protection level: IP 44 (IP 55 terminal board protection).
Insulation class: F.

Technical Specifications

Product Type
Multistage Jet Pump

Suitable For
Tank Transfer

Bar
6.1 Bar

Flow Range Category
a. 0 – 99 L/min

Flow Rate (L/min)
75 L/min

Hp
1.5 Hp

kPa
618 kPa

Kilo Watts
1.1 kW

Casing Material
Cast Iron

Head Range Category
c. 60 – 99 m

Max Head (m)
61 m

Port Size Inlet
1 1/4″ BSPF inlet

Port Size Outlet
1″ BSPF outlet

Powered
Electric

Volts
240 V

Watts
1100 W

Pack Weight (KG): 31.78

Technical Specifications

Product Type
Single Stage Jet Pump

Suitable For
Tank Transfer

Bar
4.1 Bar

Flow Range Category
b. 100 – 199 L/min

Flow Rate (L/min)
175 L/min

Hp
2 Hp

kPa
415 kPa

Kilo Watts
1.47 kW

Casing Material
Cast Iron

Head Range Category
b. 40 – 59 m

Max Head (m)
41 m

Port Size Inlet
1 1/2″ BSPF inlet

Port Size Outlet
1 1/4″ BSPF outlet

Powered
Electric

Warranty (months)
24 Months

Volts
240 V

Watts
1470 W

Pack Weight (KG): 27.50

Technical Specifications
Product Type
Multistage Jet Pump

Suitable For
Tank Transfer

Bar
6.2 Bar

Flow Range Category
b. 100 – 199 L/min

Flow Rate (L/min)
120 L/min

Hp
2.5 Hp

kPa
628 kPa

Kilo Watts
1.85 kW

Casing Material
Cast Iron

Head Range Category
c. 60 – 99 m

Max Head (m)
62 m

Port Size Inlet
1 1/4″ BSPF inlet

Port Size Outlet
1″ BSPF outlet

Powered
Electric

Warranty (months)
24 Months

Volts
240 V

Watts
1850 W

Pack Weight (KG): 35.62

Technical Specifications
Product Type
Single Stage Jet Pump

Suitable For
Tank Transfer

Bar
5.1 Bar

Flow Range Category
b. 100 – 199 L/min

Flow Rate (L/min)
175 L/min

Hp
3 Hp

kPa
517 kPa

Kilo Watts
2.5 kW

Casing Material
Cast Iron

Head Range Category
b. 40 – 59 m

Max Head (m)
51 m

Port Size Inlet
1 1/2″ BSPF inlet

Port Size Outlet
1 1/4″ BSPF outlet

Powered
Electric

Warranty (months)
24 Months

Volts
240 V

Watts
2500 W

Pack Weight (KG): 36.02

Davey manufacture a wide range of pumps for pond and aquaculture use. Whether you just want to set up a small garden pond or a full-scale commercial water feature, a small hatchery or an entire aquaculture farm, the quality and reliability of the pump and filtration system are critical to your success. The Davey range of pond and aquaculture pumps offer the choice of submersible or surface mount models as well as a full range of filters to help keep the water clean.

Product Categories

• Pond Pumps
  • Ponds and water features can be one of the most enjoyable features of your garden, home, business or public space. Why stress over the dependability of the driver for this enjoyment – your pump?
  • The Davey Pond Pump is specially designed to suit a vast variety of ponds, fountains and water features.

Davey have an extensive range of pumps and pumping systems suitable for all types of irrigation systems. Our centrifugal, multistage and submersible pumps are the ideal choice for efficient and reliable turf watering and agricultural irrigation pumping systems. High performance, quality materials and the Davey support network make these pumps ideal selection for irrigation pumping applications.

Product Categories

• Engine-Powered Self Priming Pumps
  • The Davey range of engine-driven self-priming pumps are versatile enough to handle a range of applications including firefighting, water transfer, irrigation, boom spraying, agricultural spraying (such as sheep jetting), and deep well jet pump applications. The required flow and pressure will determine which type of pump in the engine-driven self priming pump range suits your needs.
  • Twin impeller models offer several operating advantages over single stage pumps – up to 50% more pressure, or the option of reducing the engine speed to conserve fuel and extend engine life.
• General-Purpose Electric Pumps
  • The Davey range of general-purpose electric pumps include single-stage and multistage centrifugal models, as well as jet-assisted single-stage centrifugal models. All feature Davey’s legendary reliability.
  • Ideal for general water transfer or irrigation around the home, farm or commercial premises, these pumps are all designed to cope with varying water quality.
  • Special models designed for salt water and a variety of benign chemical applications are also available.
• Self Priming Electric Pumps
  • When the water you are pumping may contain soft solids, Davey self-priming open impeller centrifugal pumps are the answer.
  • There’s a Davey model to handle your job, whether it be pumping water out of a basement, septic water removal or effluent disposal from a dairy or piggery.

Since Davey started business in 1934, we have developed astrong association with the rural customer. Davey have been manufacturing and supplying reliable pumps and pressure systems for the man on the land ever since.

From the outset we at Davey knew our products needed to be tough enough to withstand harsh Australian conditions in all their extremes. It’s little wonder then that Davey customers around the world have come to depend on Davey for reliable rural water supply systems.

Product Categories

• Deep Well & Commercial Jet Pumps
  • The Davey range of quality Australian-made deep well pumps and pressure systems is ideal for supplying high pressure water from suction lifts beyond 7.5 metres. By submerging the jet and venturi down the bore, flows can be provided from as deep as 50 metres.
  • Deep well systems can also be installed in horizontally off-set situations to draw water from distant dams, rivers etc. This allows the pump to be mounted away from the source of water to gain access to power, or in places where there is the possibility of flooding.
• Engine-Powered Self Priming Pumps
  • The Davey range of engine-driven self-priming pumps are versatile enough to handle a range of applications including firefighting, water transfer, irrigation, boom spraying, agricultural spraying (such as sheep jetting), and deep well jet pump applications. The required flow and pressure will determine which type of pump in the engine-driven self priming pump range suits your needs.
  • Twin impeller models offer several operating advantages over single stage pumps – up to 50% more pressure, or the option of reducing the engine speed to conserve fuel and extend engine life.
• General-Purpose Electric Pumps
  • The Davey range of general-purpose electric pumps include single-stage and multistage centrifugal models, as well as jet-assisted single-stage centrifugal models. All feature Davey’s legendary reliability.
  • Ideal for general water transfer or irrigation around the home, farm or commercial premises, these pumps are all designed to cope with varying water quality.
  • Special models designed for salt water and a variety of benign chemical applications are also available.
• Packaged Pump Systems
  • Davey offers an extensive range of packaged pump sets, suitable for a wide variety of applications. Davey can also manufacture purpose-built pump sets, which can include any combination of Davey centrifugal, multi-stage or jet pumps specifically designed to meet the demands of the application. Control options range from standard electromechanical to the flexibility and power-saving capabilities of variable speed control.
• Shallow-Well & Commercial Jet Pumps
  • The Davey range of quality Australian-made shallow well pumps and pressure systems is ideal for supplying high-pressure water from bores, rivers and dams to applications ranging from garden sprinklers through to stock watering and wash-down applications.
  • Shallow well pumps offer versatility of performance. Simply by changing the jet and venturi, the performance of the pump can be altered to compensate for alterations to pipework systems, trough elevations, or other specific needs.
• Stainless Steel Multistage Transfer Pumps
  • Davey stainless steel multistage pumps offer many unique features.
  • The space-saving design of the inline-V series with the inbuilt thrust-bearing offers a wide operating range and the ability to use standard electric motors.
  • The compactness of the M-series horizontal pumps with complete stainless steel hydraulic construction make these units suitable for a variety of applications.
• Submersible Borehole Pumps
  • Reliability – that’s what you need in your bore – and with a Davey Submersible Borehole Pump, that’s what you get. Suitable for applications such as mine dewatering and turf watering, there’s a model to suit every need. Davey has been manufacturing borehole pumps for over 30 years, and every model features world-leading designs, exceptional material and legendary Davey reliability.

Single channel, sewage handling submersible sump pumps with a cutting impeller, capable of pumping semi-screened or grey water of neutral pH. Primarily used for sewage water pumping, the Davey Cutter pumps can also be used for sump emptying, septic effluent disposal, water transfer, pumping light slurries and factory waste, or pumping wastewater with stringy or long soft solids in suspension.

Features
Corrosion resistant 304SS grade shaft, motor shell and fasteners mean a long service life, and an open impeller and single channel centrifugal design with a cutting leading edge means it is less susceptible to blockage and capable of higher heads and pressure. The ability to cut string like materials and pump soft solids in suspension reduces the risk of blockages in pipework or the pump itself.
A double mechanical shaft seal in oil bath with hard faced silicon carbide/ceramic seal on pump side/sand slinger lip seal provides added motor protection.

Davey recommends utilising slide rail kits with Cutter pumps, for easy removal and re-installation. There is a choice of either single or three phase motors. This product is not suitable for sanitary or flushable wipe products, please consider the Grinder models for this application.
Please refer to the documentation for all features and full technical specifications.

Davey have an extensive range of pumps and pumping systems built to ISO specifications and suitable for all types industrial systems. Our centrifugal, multistage and pump systems offer unique features and performance advantages in a range of applications, including water transfer, pressure boosting and end suction. High performance, quality materials and the Davey support network make these pumps the ideal selection for industrial pumping applications.

Product Categories

• Circulator Pumps
  • Davey Circulator pumps are ideal for circulation of hot or cold water in domestic heating applications, secondary hot water services, air conditioning or cooling systems. The advanced multi-speed canned motor ensures a long, reliable operating life.
• General Purpose Electric Pumps
  • The Davey range of general-purpose electric pumps include single-stage and multistage centrifugal models, as well as jet-assisted single-stage centrifugal models. All feature Davey’s legendary reliability.
  • Ideal for general water transfer or irrigation around the home, farm or commercial premises, these pumps are all designed to cope with varying water quality.
  • Special models designed for salt water and a variety of benign chemical applications are also available.
• ISOspec® Heavy Duty Industrial Centrifugal Pumps
  • Davey ISOspec® CM-series close-coupled pumps and CF-series bareshaft pumps have been designed to international standard ISO 2858. These new pressure systems are sturdy, reliable, long-lasting and high performing – qualities that our customers know to depend on from Davey.
• Packaged Pump Systems
  • Davey offers an extensive range of packaged pump sets, suitable for a wide variety of applications. Davey can also manufacture purpose-built pump sets, which can include any combination of Davey centrifugal, multi-stage or jet pumps specifically designed to meet the demands of the application. Control options range from standard electromechanical to the flexibility and power-saving capabilities of variable speed control.
• Self Priming Electric Pumps
  • When the water you are pumping may contain soft solids, Davey self-priming open impeller centrifugal pumps are the answer.
    There’s a Davey model to handle your job, whether it be pumping water out of a basement, septic water removal or effluent disposal from a dairy or piggery.
• Sewage Pumps
  • Sewage or ‘grey’ water containing soft solids is ideal for these pumps. These submersible pumps are designed to pump semi-screened raw sewage and grey water with ease. When string-like materials may be present, the Cutter or “K” models offer the additional advantage of a special cutting tip on the impellers.
• Special Purpose Pumps
  • Some pumping applications require special solutions. Davey offer pumps for special purposes like pumping hot water for commercial washing machines, chemicals for dog spas, cooling water for chillers and many other applications.
  • The products in this section give you some examples, but there are many more specialist applications for which a Davey pump will be suitable.
• Stainless Steel Multistage Transfer Pumps
  • Davey stainless steel multistage pumps offer many unique features.
  • The space-saving design of the inline-V series with the inbuilt thrust-bearing offers a wide operating range and the ability to use standard electric motors.
  • The compactness of the M-series horizontal pumps with complete stainless steel hydraulic construction make these units suitable for a variety of applications.
• Submersible Borehole Pumps
  • Reliability – that’s what you need in your bore – and with a Davey Submersible Borehole Pump, that’s what you get. Suitable for applications such as mine dewatering and turf watering, there’s a model to suit every need. Davey has been manufacturing borehole pumps for over 30 years, and every model features world-leading designs, exceptional material and legendary Davey reliability.
• Sump Pumps
  • Davey Sump Pumps are tough suckers, with robust designs for long service lives.
  • Right from the smallest model through to the largest, these high quality sump pumps are designed to give years of dependable service.
  • With a choice of models, tasks ranging from the simple removal of clean nuisance water right through to the super-tough job of grinding and pumping of raw sewage are all comfortably within the capabilities of these pumps.

Application

The pumps are suitable for injection of chemical in:

• water and wastewater treatment systems
• washing systems
• swimming pools
• process plants

Features & Benefits

The Grundfos digital dosing pump range features a variety of unique user benefits:

• Precise capacity setting directly in ml or l
• Full diaphragm control
• Stroke speed or frequency capacity control
• Operation panel with display and one touch buttons
• Front or side fitted operation panel
• Manual/pulse control
• Control panel lock
• 4-20mA control
• Pulse-/timer based batch control
• Anti-cavitation function
• Easy calibration function
• Fieldbus communication module (option)
• Leakage sensor

Technical Data

• Capacity Q: max. 940 l/h
• Pressure p: max. 18 bar
• Liquid temp.: +50oC

Application

Used to inject soluble or liquid fertiliser in greenhouse, open field and landsacpe watering systems.

Features

• Can be installed directly on main line (Check user guide)
• Dose of concentrate always proportional to volume of water entering dispenser
• No power needed
• Uses hydraulics from irrigation system
• No waste water

Specifications

• Body – Delrin
• Dosing stem – Polypropylene and polyethylene
• Piston – Polyurethane, nylon, nitrile, delrin
• Built in protection filter 32 mesh stainless steel
• Maximum operating temperature 40ºC
• Maximum head loss 70kPa at max flow rate
• Maximum suction height 4 metres
• Practical operating flow 5000-8000LPH through injector
• Operating pressure 150-800kPa
• Maximum injected solution at 500L/H – 10L
• Maximum injected solution at 8000L/H – 160L
• Adjustable dosage 0.2% to 2%
• Inlet/outlet 50mm metric poly

Application

Used to inject to inject soluble or liquid fertiliser in greenhouse, open field and landscape watering systems.

Features

• Can be installed directly on main line (check user guide)
• Dose of concentrate always proportional to volume of water entering dispenser
• No power needed
• Uses hydraulics from irrigation system
• No waste water

Specifications

• Body – Delrin
• Dosing stem – Polypropylene and polythylene
• Piston – polyurethane, nylon, nitrile, delrin
• Built in protection filter 32 mesh stainless steel
• Maximum operting temperature 40ºC
• Maximum head loss 70kPa at max flow rate
• Maximum suction height 4 metres
• Practical operating flow 5000-8000Lph through injector
• Operating pressure 150-800kPa
• Maximum injected solution at 500L/h – 25L
• Maximum injected solution at 8000L/h – 400L
• Adjustable dosage 1% to 5%
• Inlet/outlet 50mm metric poly

Application

Used to inject to inject soluble or liquid fertiliser in greenhouse, open field and landscape watering systems.

Features

• Can be installed directly on main line (check user guide)
• Dose of concentrate always proportional to volume of water entering dispenser
• No power needed
• Uses hydraulics from irrigation system
• No waste water

Specifications

• Body – Delrin
• Dosing stem – Polypropylene and polythylene
• Piston – polyurethane, nylon, nitrile, delrin
• Built in protection filter 50 mesh stainless steel
• Maximum operting temperature 40ºC
• Maximum head loss 140kPa at max flow rate
• Maximum suction height 4 metres
• Practical operating flow 10L/hr – 2500L/hr through injector
• Operating pressure 30 – 600kPa
• Maximum injected solution at 10Lph – 0.5L/h
• Maximum injected solution at 2500Lph – 125L/h
• Adjustable dosage 1% to 5%

Application

Used to inject soluble or liquid fertiliser in greenhouse, open field and landsacpe watering systems.

Features

• Can be installed directly on main line (Check user guide)
• Dose of concentrate always proportional to volume of water entering dispenser
• No power needed
• Uses hydraulics from irrigation system
• No waste water
• Low pressure flow operstion

Specifications

• Body – Delrin
• Dosing stem – Polypropylene and polyethylene
• Piston – Polyurethane, nylon, nitrile, delrin
• Built in protection filter 50 mesh
• Maximum operating temperature 40°C
• Maximum head loss 140kPa at max flow rate
• Maximum suction height 4 metres
• Practical operating flow 10L/Hr-2500L/Hr through injector
• Operating pressure 30-600kPa
• Maximum injected solution at 10L/hr 0.02L/Hr
• Maximum injected solution at 2500L/hr 40L/Hr
• Adjustable dosage 0.2% to 1.6%
• Inlet/outlet 20mm BSP male

Application

Used to inject liquid chlorine in greenhouse, open field and landscape watering systems.

Features

• Can be installed directly on main line (check user guide)
• Dose of concentrate always proportional to volume of water entering dispenser
• No power needed
• Uses hydraulics from irrigation system
• No waste water

Specifications

• Body – poly acetal
• Dosing stem – Polypropylene and polythylene
• Piston – polyanide, nitrile, polyacetate, polypropylene
• Seals – motor viton, dosage seal viton
• Inlet/outlet 32mm BSP male
• Built in protection filter 50 mesh stainless steel
• Maximum operting temperature 40ºC
• Maximum head loss 140kPa at max flow rate
• Maximum suction height 4 metres
• Practical operating flow 10L/hr – 2500L/hr through injector
• Operating pressure 50 – 500kPa
• Maximum injected solution at 100Lph – 1.5L/h
• Maximum injected solution at 4500Lph – 67L/h
• Adjustable dosage 0.2% to 1.5%

Features:

• Excellent UV resistance to withstand extreme Australian conditions.
• Specially manufactured as to not taint water.
• Complies to Australian Standard AS2070 (non toxic food grade).
• Made especially for the conveyance of drinking water. This makes it popular within the caravan, boating and recreational vehicle industries.
• Metre marked to make measuring and cutting easier.

Construction:

Inner core: White non tainting polyolefin with a smooth finish.
Reinforcing: High tenacity polyester yarn.
Outer cover: UV stabilised clear polyolefin with a smooth finish.

Lengths: 20m, 100m

Working Pressure @ 20°c: 1 Mpa

Nom ID: 12.5mm

Nom OD: 17.1mm

Application:

Dual checks provide protection to the potable water supply from contamination in low hazard applications like meter connections on domestic properties.

Specifications:

•  Body: Bronze
•  Check Springs: Stainless steel
•  Minimum Working Pressure 220kPa
•  Maximum Working Pressure 1200kPa
•  Compact and lightweight
•  Corrosion resistant
•  Independently operating check valves
•  Operating temperature range of 1°C to 60°C
•  Suitable for vertical and horizontal installations
•  Approved to AS 2845-1

* Low Hazard Rating

Available in:

Black or Grey

48mm x 30mt

Submersible sewage pump made of stainless steel AISI 304 with double mechanical seals ensure long life and reliability. Suitable for dirty water with solids. Applications include remote sewage stations for housing developments, pubs, hotels and restaurants and water display features.

Technical Data

• Flow rates upto 800 litres/minute
• Pressures upto 18metres

Open impeller, centrifugal pump made from stainless steel AISI304, suitable for suspended solids applications, such as vegetable washing, industrial washing machines, process applications and general dirty liquid handling. Max solid size – 19mm

Technical Data

• Flow rates upto 1000 litres/minute
• Pressures upto 1.6bar

Vertical multistage centrifugal pump made of stainless steel AISI. Reliable, quiet and easy to maintain. Suitable for municipal, industrial and agricultural applications. Fire fighting, water boosting, water treatment plant, irrigation, hot & cold water movement for heating systems, especially suitable for boiler feed applications due to the robust construction of the pump.

Technical Data

• Flow rates upto 1200 litres/minute
• Pressures upto 25bar

Application

Repair coupling used in PVC Pipe Networks carrying water.

Specifications

• Material – PVC Type 1, Grade 1, Cell Class 12545-B
• BYNA-N Seals – Double Width
• ACME Thread cap to body
• Maximum pressure – 1378kPa

* Do not use on gas, oil and compressed air.

Application

Used in PVC Pipe networks carrying water.

Specifications

• PVC Type 1, Grade 1, Cell Class 12545-B
• EDPM – ‘O’ Ring Seal
• Pressure control ring – PVC
• Stainless Steel grip ring
• ACME Thread cap to body
• Maximum pressure – 1102kPa
• Stainless Steel collar

* Do not use on gas, oil and compressed air.

Application

Used to allow the addition of a tee branch in PVC Pipe Network carrying water.

Specifications

• Material – PVC Type 1, Grade 1, Cell Class 12545-B
• BYNA-N Seals – Double Width
• ACME Thread cap to body
• Maximum pressure – 1378kPa
• 15mm to 50mm sizing

* Do not use on gas, oil and compressed air.

Application

Excellent for use in repairing broken lines or adding additional lines. Simply cut section of broken pipe slightly longer than compressed Flo Span, apply glue to fitting and expand Flo Span to fill the gap.

Specifications

• Double ‘O’ Ring design on expansion (EDPM)
• ACME Thread cap to body
• 1378kPa rated in all positions
• EDPM ‘O’ Ring on union end
• Body: PVC Type 1, Grade 1 material
• 15mm to 100mm sizing

* Do not use on gas, oil and compressed air.

The Foamy Column Jet nozzles achieve a great water volume which is ideal for viewing from great distances. Especially beautiful when lit, Columnar effect is made up of many small jets of clear water.

Size: 10″ x 2.5″
Type: Poly Spun Sediment Cartridges
Micron: 10 micron

These cartridges are standard Australian Size. These economical “FSA” high performance sediment cartridges are constructed from polypropylene which is spun and melted simultaneously. This technique means there is no centre core to restrict filter performance.

The “FSA” series of sediment filters are compatible with most liquids and are highly effective for sediment, rust, sand, silt, and algae removal.

“FSA” performance sediment filters have no chemical residuals. They are extremely high performing, and carry a heavy load of sediment before requiring replacement.

These filters have:

* high performance
* high flow rate
* high load capacity
* The inabilty to grow bacterial slime

These filters are IDEAL for:

* tank water filtration
* pre carbon filtration
* ‘All of House’ filtration

Application:

Battery operated controller used to control Galcon DCV-25 actuators for watering lawns and garden beds.

Features:

• Indenpendent station programming, single station (DC1)
• Up to 4 start times per station
• Watering time from 1 minute to 12 hours
• Irrigation schedule – 7 day calendar or interval from 1 to 30 days
• Controller is powered by two 9 volt akaline batteries
• Rain off position
• Water Resistant
• Operating pressure range 70kPa – 1000kPa
• DC1 supplied with 1 DVC-25mm
• Maximum flow through DVC-25mm, 160LPM*

* Check velocity in pipe work may exceed industry standard for safe irrigation practices.

Application:

Battery operated controller used to control Galcon DCV-25mm actuators for watering lawns and garden beds.

Features:

• Operation of 6 to 12 valves plus a master valve (or pump using latching relay, optional extra).
• Separate irigation schedule programmable for each valve.
• Up to 4 irrigation activations per day per valve in programmable weekly schedule mode.
• Programmable weekly/cyclical irrigation schedules.
• Irrigation window in cyclical program mode (Loop mode).
• Irrigation duration: 1 second to 12 hours.
• Irrigation frequency from once every minute to once every 30 days in cyclical program.
• Manual operation of individual valves.
• Sequential manual operation of all valves.
• Operation of valves up to 50 metres from the controller.

Main Features Specific to DC12S

• Weather resistant.
• Operated by four 9V alkaline batteries.
• Operates Galcon DCV-25mm only.

Main Features Specific to DC6S

• Weather resistant.
• Operated by two 9V alkaline batteries.
• Operates Galcon DCV-25mm only.

Application:

Battery operated hose tap timer.

Features:

• Individual Day Programming:
  – Can be set to water on specifica days.
• Irrigation Duration from 1 minute to 12 hours.
• Up to four start times per day.
• Electronic manual operation via the controller.
• Rain off suspension option.
• Low battery indicator.
• Internal filter installed in the controller.
• Operated by a 9V alkaline battery.
• Battery lasts up to one season (Pending site and operating modes.).

Technical Specifications:

• Controller body – ABS
• LCD Display.
• Seals –EPDM.
• Standard – CE.
• Battery – 9V alkaline (optional extra).
• Maximum capacity 23LPM.
• Working pressure range – 100 – 1000kPa

Geyser Jets can be used with moderate winds. These jets must be installed on a determined height due to its water level dependancy. It will increase its stream height if the water level falls (reducing its diameter), and will decrease stream height whenever the water level rises.

If waves are not avoided Geyser Jet will have continuous stream fluctuations.

Overflow drain, water level sensor and wave reduction system should be installed to achieve best performances.

Swivvel connection allows adjustment of inclination to allow parabolic or vertical jets.

Application

The pumps are suitable for liquid transfer in:

• Washing systems
• Cooling and air-conditioning systems
• Water supply systems
• Water treatment systems
• Fire fighting systems
• Industrial plants
• Boiler feeding systems

Features & Benefits

The Grundfos CR multistage centrifugal pump range features a variety of unique user benefits:

• Reliability
• High efficiency
• Service-friendly
• Space-saving
• Suitable for slightly aggressive liquids

Options

• Dry running protection and motor protection via LiqTec

Technical Data

• Flow Q:max: 120m3/h
• Head H:max: 330m
• Liquid temp: -40oC to +180oC
• Operat. pres: max 33 bar

Application

The pumps are suitable for:

• Drainage
• Effluent
• Wastewater
• Process water
• Domestic sewage

Features & Benefits 

The Grundfos DP, EF, SE and SEV submersible wastewater pump range features a variety of unique user benefits:

• Cable plug connection
• Unique clamp connection
• Single-channel and vortex impellers
• Solids passage upto 65mm
• Unique cartridge shaft seal
• Modular design
• Minimum downtime

Option

• Control and protection system
• Motor operation control

Technical Data

• Flow Q:max: 19.5l/s (70m3/h)
• Head H:max: 25m
• Liquid temp: 0oC to +40oC
• Discharge diameter : Rp2 to DN65

Application

Hydro 2000 are suitable for pressure boosting in

• Water supply systems
• Irrigation systems
• Water treatment systems
• Fire fighting systems
• Industrial plants

Features & Benefits

The Grundfos Hydro pumping system range, features a variety of unique user benefits:

• Constant pressure
• Simple installation
• Low-energy
• Wide range
• Optional – External communication, Control 2000

Technical Data

• Flow Q: max. 720 m3/h
• Head, H: max. 160 m
• Liquid temp.: 0oC to +70oC
• Operat. pres.: max. 16 bar

Application

The SEG pumps are suitable for the following applications:

• Pumping untreated sewage in small communities
• Pumping of sewage in pressurised systems

Features & Benefits

The Grundfos SEG pump range features a variety of unique user benefits:

• Enhanced reliability and better performance
  • Newly developed cartridge shalf seal system together with the epoxy sealed cable plug system, prevents liquid from penetrating into the motor
• High discharge pressure enables transfer of sewage over longer distances
• Improved grinder system
  • An efficient grinder system with easily replceable parts reduces downtime and facilitates quick and easy maintenance
• Integrated SmartTrim impeller adjustment system ensures optimum performance at all times

Technical Data

• Flow Q:max 18m3/h
• Head H:max 45m
• Liquid temp.: 0oC to +40oC
• Pumped liquids: sewage with a PH value of 4 – 10 in permanent installations

Application

The SP pumps are suitable for the following applications:

• Groundwater supply to waterworks
• Irrigation in horticulture and agriculture
• Groundwater lowering
• Pressure boosting
• Industrial applications

Features & Benefits

The Grundfos SP pump range features a variety of unique user benefits:

• High efficiency
• Long service life as all components are stainless steel
• Motor protection via CU3
• Optional – data can be monitored and controlled via CU2/R100

Technical Data

• Flow Q:max 470m3/h
• Head H:max 670m
• Liquid temp.: 0oC to +60oC
• Instal. Depth: max. 600m

Applications

The pumps are suitable for

• Domestic water supply systems
• Groundwater supply to waterworks
• Irrigation in horticulture and agriculture
• Groundwater lowering
• Industrial applications

Features & Benefits

• Integrated dry-running protection
• Soft start
• Over- and undervoltage protection
• High efficiency

Technical Data

• Flow (Q)
  • max. 9 m³/h
• Head (H)
  • max. 230 m
• Liquid temperature
  • max. 35 °C

Application

The pumps are suitable for:

• Domestic water supply systems
• Groundwater supply to waterworks
• Irrigation in horticulture and agriculture
• Groundwater lowering
• Industrial applications

Features & Benefits

The Grundfos SQ/SQE submersible pump range features a variety of unique user benefits:

• Integrated dry-running protection
• Soft start
• Over and undervoltage protection
• High efficiency

Options

• SQE can be protected, monitored and controlled by CU300 and
• CU301 via R100

Technical Data

• Flow Q:max: 9m3/h
• Head H:max: 210m
• Liquid temp: 0oC to +40oC
• Installation depth: max 600m

Application

The SQFlex systems are suitable for remote locations, such as:

• Stock watering
• Remote community water supply
• National Parks and camp grounds

Features & Benefits

The Grundfos SP pump range features a variety of unique user benefits:

• Energy supply: Solar modules, wind turbine, generator
• Dry-running protection
• 74-100mm diameter
• Simple installation
• Expansion possibilities
• Cost-efficient pumping
• Reliable water supply
• Virtually no maintenance

Technical Data

• Flow Q:max 90m3/h
• Head H:max 120m
• Liquid temp.: 0oC to +40oC
• Voltage supply: 30-300 VDC or 1×90-240 V, 50/60 Hz
• Instal. Depth: max. 150 m

Single or Multichannel Impeller Pumps

Application

The pumps are suitable for the following applications

• Transfer of wastewater
• Transfer of raw water
• Pumping of sludge-containing water
• Pumping of industrial effluent

Features & Benefits

The Grundfos submersible wastewater pump range features a variety of unique user benefits:

• Wide range
• SmartTrim
• Operation with/without cooling jacket
• Submerged or dry installation
• Different types of impellers
• Built-in motor protection

Options

• Control and protection systems
• External cooling water
• External seal flush system

Technical Data

• Flow Q: max. 1000 m3/h
• Head, H: max. 90 m
• Liquid temp.: 0oC to +40oC
• Particle size: max. ø145 mm
• Grundfos CH – Domestic Water Supply pumps

Application

Complete range of threaded fittings used on all irrigation pipe work systems.

Specifications

• No corrosion risk
• UV Stable
• Working pressure to 1600kPa
• BSP and BSPT Threads
• Sizes 15-50mm
• Nipples & sockets
• Bushes, female tees and elbows.
• Male elbows, hex plugs
• Hose tails, backnuts and caps
• Tank male inlets, tank fittings
• Materials of construction: nylon and polypropylene

Size: 10″ x 2.5″
Type: Poly Spun Sediment Cartridges
Micron: 1, 5, 20 micron
These cartridges are standard Australian Size. These economical “HPF” high performance sediment cartridges are constructed from polypropylene which is spun and melted simultaneously. This technique means there is no centre core to restrict filter performance.
The “HPF” series of sediment filters are compatible with most liquids and are highly effective for sediment, rust, sand, silt, and algae removal.
“HPF” performance sediment filters have no chemical residuals. They are extremely high performing, and carry a heavy load of sediment before requiring replacement.
These filters have:
* high performance
* high flow rate
* high load capacity
* The inabilty to grow bacterial slime
These filters are IDEAL for:
* tank water filtration
* pre carbon filtration
* ‘All of House’ filtration

Application

Complete range of PVC fittings used in all irrigation watering systems and fresh water piping networks.

Specifications

• Australian Standard AS 1477 CL18
• Material : 100% virgin
• Polyvinyl Chloride (PVC) 83.3% no less
• Titanium Dioxide (TiO2) 1.5 parts per hundred mass
• Vinyl Chloride Monomer content: 1mg/kg less than

Typical Properties:

Selection of 13 Categories

See HR Products Price list for sizes and codes

Not for use with compressed air or gases

Features:
Soaker hose perfect for watering garden beds, lawn and nature strips.

Application:

Ideal for home watering systems

Features:

• Full, three quarter, half and quarter nozzles.
• Radius adjustment on nozzles.
• Ratchet stem easily adjusts spray direction.
• Exclusive wiper seal blocks grit, ensures reliable pop-up action.
• Access filter by removing nozzle.
• Heavy duty stainless steel spring.
• U.V. resistant.

Application

Hunter presents a way to meet your deep watering needs that offers considerably more efficiency than drip irrigation. With the ability to compensate for pressure differences, the Hunter PCB (and PCN, which attaches directly to pop-up spray bodies) allows the output of water to remain constant regardless of the input pressure, resulting in a precise application never before achieved in bubblers. The same holds true with the MSBN and 5-CST-B nozzles, designed for deep watering of larger planted areas. Now, every plant, shrub or tree can receive the same amount of water required with no excess runoff or waste. Best of all, because it’s so simple to install, you’ll have the perfect alternative to drip…no fancy filtration, no unsighlty above-ground tubes, and considerably less chance of damage. For a more attractive, more efficient way to deep water, let the idea of Hunter’s bubbler products to sink in.

With the pressure compensating nozzle (PCN), you get all the advantages over traditional drip irrigation plus a product that sits atop a riser that retracts into the ground when not in use. It’s the most tamper proof, eye appealing method of deep watering available today (attention specifiers…you’re going to like this).

Four different PCB models means that you can choose from colourcoded flow rates of either 0.91, 1.91, 3.81 or 7.61 litres per minute to eliminate guesswork and guarantee that all your greenery gets exactly the water it needs. Or choose the AFB model which pressure compensates to a 7.61 LPM flow and can be fine-tuned with a stainless steel screw adjustment.

Description:

With 34 nozzle choices, a 17’ to 46’ radius, and 6 body choices, the I-20 is an indispensable rotor. Whether you’ve got a small area, sandy soil, or a mix of shrubs and grass, the I-20 is ready to water with efficiency and reliability. Recent improvements include automatic arc return; non-reversing 360, from 50 to 360 degrees; and a non-strippable, vandal-proof drive mechanism that prevents gear stripping and saves repair costs. Adding FloStop® control, easy through-the-top arc adjustment, and a standard drain-check valve all equate to a rotor that stands second-to-none in its class.

Features:

• Models: Shrub, 10cm, 15cm, 30cm
• Models stainless riser: 10cm, 15cm
• Arc setting: 50 to 360 degrees
• Factory installed rubber cover
• Through-the-top arc adjustment
• Quick check arc mechanism
• Water lubricated gear-drive
• Warranty period: 5 years
• Nozzle choices: 34
• Nozzle racks:
  • 1.5 to 8.0 Blue,
  • 2.0 to 4.5 Low Angle Gray,
  • 0.50 to 3.0 Short Radius Black,
  • 6.0 to 13.0 Green,
  • MPR-25
  • MPR-30
  • MPR-35

Advanced Features:

• Automatic arc return
• Non-strippable drive
• Part- and full-circle in one model
• Headed and slotted set screw
• Flostop® Control
• Optional reclaimed water ID
• Stainless steel riser
• Drain check valve (up to 30m of elevation)

Operating Specifications:

• Radius: 4.9 to 14.0m
• Flow: 0.07 to 3.23 m³/hr; 1.2 to 53.8 l/min
• Recommended pressure range: 1.7 to 4.5 bar; 140 to 700 kPa
• Operating pressure range: 1.4 to 7.0 bar; 140 to 700 kPa
• Precipitation rates: 10 mm/hr approximately
• Nozzle trajectory: Standard = 25°, low angle = 13°

Description:

The I-25 gets the job done with power, efficiency, and commercial-grade reliability. With a robust watering radius of 40’ to 71’, this rotor can be used in a variety of applications and environments. Its compact, highly durable design comes with an optional stainless steel riser for tough-as-nails strength. With a 5-year warranty, the I-25 also has options for reclaimed water ID and high-speed. A standard check valve is built in, and a wide selection of high performance nozzles are available. Efficient, tough, and built-to-last, Hunter’s I-25 rotors work hard day in and day out so you don’t have to.

Features:

• Models: 4″, 6″
• Models stainless riser: 4″, 6″
• Arc setting: 50 to 360 degrees
• Factory installed rubber cover
• Through-the-top arc adjustment
• Quick check arc mechanism
• Water lubricated gear-drive
• Nozzle choices: 12
• Nozzle range: #4 to #28
• Warranty period: 5 years

Advanced Features:

• Automatic arc return
• Non strippable drive
• Part- and full-circle in one model
• Color coded nozzles
• Optional reclaimed water ID
• Stainless steel riser
• Drain check valve (up to 30m of elevation)

Operating Specifications:

• Radius: 11.9 to 21.6 m
• Flow: 0.82 to 7.24 m³/hr; 13.6 to 120.7 l/min
• Recommended pressure range: 2.5 to 7.0 bar; 250 to 700 kPa
• Operating pressure range: 2.5 to 7.0 bar; 250 to 700 kPa
• Precipitation rates: 15 mm/hr approximately
• Nozzle trajectory: 25°

Description:

With the ability to deliver water accurately and efficiently at distances up to 22 metres, our topof- the-line commercial rotor has earnedthe distinction of being the number one choice at sports facilities the world over.  The I-41 is also a proven performer at parks and commercial sites as well. It’s no wonder why with features like the ProTech™ safety system, two secondary nozzles that offer exceptional mid-range and close-in coverage, a stainless steel riser, the factory installed drain check valve, and a new self-adjusting variable stator that enhances the life of the gear drive.

Features:

• ProTech™ Safety System:
  Small exposed heavy duty rubber cover and boot keeps playing areas safe.
• Primary Nozzle System: 6 interchangeable nozzles:
  Uniform coverage 13.7 – 22.6m radius.
• Dual opposing nozzle full-circle option.
  Superior coverage for maximum efficiency.
• Easy Arc Adjustment (40° – 360°)
  Up, down, wet or dry with through the top convenience.
• Stainless steel riser and super–strong spring.
  For long–term positive retraction.
• Proven water–lubricated Gear Drive.
  Time–tested and now improved for even longer life.
• Patented VStat® Self Adjusting Stator.
  No stator ring required, drives with more power and adds years to sprinkler life.
• Drain Check valve for up to 4.6m elevation change.
  Saves water, reduces liability.
• 5 year over counter warranty

Description:

The I-90 is the industry’s longest distance rotary sprinkler specifically  designed for parks, sports fields and public areas. With a radius of up to 29 metres from a single sprinkler. Yet its reduced-size diameter and cushioned rubber cover make it the perfect choice for parks and wide-open lawn areas, as well as perimeter watering of athletic fields and horse arenas. The I-90 is easy to service, with a jar-top body cap that allows quick access to the filter screen and check valve with no extra pieces, parts or tool required. The I-90 is offered in two models – a full-circle opposing-nozzle version or an adjustable arc model – each with colour coded nozzles that can be field-changed to match the specific needs of your site.

Features:

• Extra Thick heavy duty rubber cover:
  Helps keep playing surfaces safe.
• 6 colour-coded primary nozzles:
  Truly uniform coverage and fast identification.
• Jar-Top serviceability:
  Easy access to screen, gear drive and valve assemblies.
• Closed case rotor: Absolute protection from dirt.
• Proven, heavy-duty gear drive:
  Enduring reliability.
• Water activated riser seal:
  Clean flushing action and positive retraction.
• Heavy duty stainless steel spring:
  Assures positive retraction, time after time.
• Drain check valve to handle elevation change:
  Saves water, reduces liability.
• 5 year over counter warranty.

Description:

A heavy-duty, high pressure workhorse, with the added benefit of contamination protection. Dirt. It’s a valve’s biggest enemy. But aren’t filters supposed to keep a valve dirt free? Well, most can keep out the big stuff, but what about the microscopic particles – like minerals and algae – that can build up on the diaphragm filter? After all, that kind of contamination, over time, can lead to the product’s premature failure. That’s why Hunter developed Filter Sentry™, a scouring mechanism which continuously works whenever the ICV is operating. Added to all the other outstanding features of the ICV, it results in the most durable and reliable valve available that can consistently withstand pressures of up to 220 PSI. The ICV Filter Sentry™. When it comes to valve performance, there’s no better way to stand guard over dirt.

Features:

• Glass-filled nylon construction:
  220 PSI rated for maximum strength and sturdiness
• Internal manual bleed:
  Keeps valve box dry
• Captive solenoid plunger:
  No more lost parts when servicing
• Captive bonnet bolts with matching brass body inserts:
  Provide ease of service, eliminate lost parts
• Fabric reinforced diaphragm:
  Provides reliable operation up to 220 PSI
• Patented filter sentry system:
  Automatically cleans the filter
• Optional reclaimed water identification handle:
  For field identification of non-potable water supply

Specifications:

• Flow: 0.9 – 1135.5l/min
• Pressure: 138 – 1500kPa
• Temperature: up to 66ºC
• Heavy-duty solenoids: 24VAC, 475mA inrush current, 230mA holding current, 50 cycles
• Accu-Set™: 138kPa minimum operating pressure.
  Regulates from 138 – 689kPa

Description:

The top-of-the-line valve you can count on for superior durability and ability to handle
exceptionally high pressures. For a long-lasting valve that can deliver dependable performance at commercial sites, this is the heavy-duty workhorse you can count on. Created to handle the wide range of conditions different sites will bring, this valve includes both a fabric reinforced diaphragm and flow control as standard features, and can consistently withsatnd pressures of up to 220PSI while handling the continual hammer that such forces will produce. The ICV also offers the added option of the Accu-Set™ pressure regulator to maintain a safe, constant water pressure level. Plus, it’s exceptionally easy to service, with bonnet fasteners that can be loosened and tightened using a variety of common contractor tools.

Features:

• Glass-filled nylon construction:
  220 PSI rated for maximum strength and sturdiness
• Internal manual bleed:
  Keeps valve box dry
• Captive solenoid plunger:
  No more lost parts when servicing
• Captive bonnet bolts with matching brass body inserts:
  Provide ease of service, eliminate lost parts
• Fabric reinforced diaphragm:
  Provides reliable operation up to 220 PSI
• Optional reclaimed water identification handle:
  For field identification of non-potable water supply

Specifications:

• Flow: 0.9 – 1135.5l/min
• Pressure: 138 – 1500kPa
• Temperature: up to 66ºC
• Heavy-duty solenoids: 24VAC,
  475mA inrush current,
  230mA holding current, 50 cycles
• Accu-Set™: 138kPa minimum operating pressure.
  Regulates from 138 – 689kPa

Description

Exceptional strength, innovative features…just the need for high traffic areas. Features like a positive-seal flush cap with an innovative pullup design that keeps debris out. A high quality, multi-functional, pressure-activated wiper seal. True pressure regulation under a wide range of environmental and pressure conditions to reduce water waste. An in-stem regulator that acts as a flow control device if the nozzle is removed. A super heavy-duty check valve assembly that eliminates the potential liability issues of low head drainage, the most powerful retraction  spring in its class. Sounds like a lot in a spray sprinkler? How about one more great feature – just like all other Hunter Institutional SeriesTM irrigation products, it carries a 5 year warranty.

Features

• In-stem pressure regulation built in.
  Maximum nozzle efficiency regardless of inlet pressure.
• Heavy-duty body and cap construction.
  Multi-thread buttress design withstands the harshest envvironments.
• Pressure activated, multi-function, no flow-by wiper seal.
  Easy to remove and clean; treated with UV inhibitors to ensure
  long life.
• Compatibility with all female threaded nozzles.
  Accepts adjustable, fixed and specialty nozzles from Hunter and all major brands.
• Optional Factory-installed drain check valve for up to 10 feet elevation change.
  Eliminates landscape damage from flooding and erosion.
• Ratcheting riser for quick arc alignment.
  Make adjustments while sprinkler is operating.
• Heavy-duty spring.
  For positive retraction under any conditions.
• Innovative “pull ring” flush plug design.
  Allows limited flow permitting controlled directional flushing.

Specifications

• Recommended pressure range: 103 to 689 kPa
• Flow-by: 0 at 68kPa or greater; 0.4l/min otherwise.
• Precipitation rate: approximately 38mm/hour.

Description:

There’s nothing more embarrassing – or more wasteful or costly – than an irrigation system that runs when it doesn’t have to…in the rain. Mini-Clik provides the simplest, most effective to prevent sprinklers from coming on during or after rain. It easily installs on any automatic irrigation system, then shuts sprinklers off in a storm and keeps them off, automatically compensating for the amount of rainfall that occurred. Disks absorb water and expand proportionally to the amount of rain that fell. As the moisture-laden disks expand, they eventually activate a switch that interrupts the circuit from the controller to the solenoid valves. Once dry, they contract and release the switch. thus, Mini-Clik automatically resets without ever affecting the controller. There’s no better way to ensure that a system isn’t watering when it isn’t necessary.

Features:

• Easily installs on any automatic irrigation system
  Versatile enough to work with all popular controllers
• Patented mechanism cannot be fouled by dirt or debris
  Reliable operation, no false shutdowns
• Adjusts to actuate at various rainfall quantities
  Set from 3 to 25mm
• Includes 7.6m of 1.0mm² two conductor wire
  Fast and easy mounting out of site
• 5-year warranty
  Your guarantee of dependable operation

Specifications:

• Switch rating: 10.1 amps at 125/250 VAC
• Wiring: MC2: Typically interupts the common ground wire between the solenoid valves and the controller.
• Included: 7.6m of 1.0mm² two conductor wire, two mounting screws, controller identification label and detailed instructions
• UL listed

Bypass switch box: give any automatic controller’s remote sensors the capability to bypass. It’s the easy way to put a system in the manual mode as would be needed during servicing and troubleshooting operations. Features a compact, heavy-duty switch mechanism, the Bypass Switch Box mounts quickly and easily with it’s no-strip wire connectors and supplied adhesive tape

Description:

Reliable battery–powered control without the need of electric connection. For isolated sites or power-restricted areas and for the special needs of drip zones, Hunter provides the ideal economical answer. The SVC mounts to a valve solenoid quickly and easily – without screws, drills or additional wires – and the unit’s solid contruction ensures it can handle the harsh environment of a valve box.

Features:

• Type: Fixed
• Battery Operated
• Number of stations: 1, 2, 4, 6
• Enclosure: Outdoor Plastic
• Independant Programs: 3
• Start times per program: 4
• One touch manual start and advance
• Master Valve operation (available in 2, 4, 6 station models)
• Solar Panel Kit (SPNODE) provides maintenance-free operation
• Accepts single or double 9V batteries for extended battery life
• Solenoid wire length up to 30m (use 1mm wire)
• Programmable off mode
• Submersible to 4m (IP68 rated)
• Battery life indicator
• Protective rubber cover
• Wattanty period: 2 years
• Easy Retrieve memory
• Season Adjustment: Global

Specifications:

• Sensor inputs: 1
• Operates DC latching solenoids only (P/N 458200)
• Operating temperature: -18C to 60C
• Power source: 9V battery (up to two) or Solar Panel
• Solar Panel Kit SPNODE eliminates the need for batteries and provides maintenance-free operation

Models:

Description:

A rack of easy-to-install-and-change, water-efficient nozzles…just like PGP. Easy adjustment from the top of the sprinkler…just like PGP. The safety and durability of a rubber cover…just like PGP. The PGJ is a chip off the ol’ block, in essence a PGP “junior.” Hunter has scaled down the world’s top-selling sprinkler exclusively for use in applications that typically call for a spray but where it’s now possible to have all the benefits of a rotor. The PGJ is capable of working in tandem with larger rotors to combine big and small areas in a single zone, offering a convenience and efficiency that sprays do not. With PGJ, fewer heads perform more efficient work for a more economical price.

Features:

• Radius Adjustment Screw:
  Allows fine tuning of spray, ensures positive nozzle retention, can’t be lost
• Protective rubber cover:
  Keeps debris out.
• 40º-360º adjustable arc:
  Easily adjustable from top of sprinkler, up, down, wet or dry.
• Water-lubricated gear drive:
  Time proven, reliable rotation, year after year.
• Variable stator:
  Keeps rotation speed consistent regardless of nozzle size or pressure.
• Extra large filter screen:
  Traps more debris without clogging.
• Optional factory-installed drain check valve:
  Prevents wet spots caused by low head drainage.

Specifications:

• Discharge rate: 0.15 to 1.2m3/hr; 2.4 to 20.1 l/min
• Radius: 4.6 to 11.3m
• Recommended pressure range: 2.1 to 3.4 bars; 206 to 344 kPa
• Nozzle trajectory: approximately 14

Description:

The worlds best selling residential and light commercial rotor designed for use in large turf areas, Sets the standards for the entire industry.

Features:

• Intergral Rubber Cover:
  Keeps dirt out, won’t fall off.
• Complete set of interchangeable nozzles:
  12 standard or optional extra 7 low-angle nozzles.
• 40°–360° adjustable arc of full circle versions:
  For fast, hassle–free adjustment, wet or dry.
• Proven, long–life, water–lubricated gear drive:
  First introduced over 20 years ago and still continuously improved.
• Variable stator:
  Keeps rotor speed consistent regardless of nozzle size or pressure.
• Large dirty water screen:
  Puts an end to nozzle clogging.
• 2 Year over the counter warranty

How to save more water

Add the optional drain check valve to any PGP sprinkler. It prevents water from draining out of the irrigation pipes when the sprinkler pops down. Checking up to 3.0m in elevation change, it saves water, reduces the liability exposure and stops erosion near the sprinkler.

Description:

A complete line-up of rugged, professional-grade valves designed to handle the full range of landscape needs. The PGV is a hard working, heavy-duty valve. With a range of sizes available the PGV is suited to small and large landscape applications. All models feature durable highgrade construction and a rugged diaphragm with a support to prevent stress failure.

Features:

• Heavy-duty Hunter solenoid:
  Provides dependable operation and long life.
• High grade construction:
  Made of durable materials to resist wear:
• Internal manual bleed:
  Easy to use and keeps valve box dry.
• Flow control with non-rising handle:
  Adjust the flow of each zone on a system
• Rigid diaphram support:
  Works to prevent stress failure in tough conditions.
• Globe and angle configurations:
  Easy to use in any application.
• Captive bonnet bolts and solenoid plunger:
  No lost parts during servicing.
• Accu-Set™ pressure regulator compatible:
  Dial setting pressure regulation for precise system control.

Specifications:

• Flow: 0.7 to 454.2 l/m
• Pressure: 138 – 1034kPa
• Heavy-duty solenoids: 24VAC,
  475mA inrush current,
  230mA holding current, 50 cycles

Description:

Maximum convenience, reliability and ease of service in a residential valve. Now it’s possible to service a Hunter valve without using any tools to gain access to the inner workings of the product. Products maintenance has never been easier. With this simplicity, you don’t give up any quality or performance as these valves boast more than enough features to handle the demands of whatever your site has to offer. The PGV Jar-Top features durable, high-grade, corrosive and UV resistant PVC contruction and a rugged double beaded, leak-proof diaphragm with support to prevent stress failure.

Features:

• Jar-Top bonnet:
  Intuitive design makes it easy to access the valve; no tools necessary.
• Full-encapsulated Hunter solenoid:
  Provides dependable operation and long life.
• High grade construction:
  Made of durable materials and stainless steel to resist wear.
• Internal Manaul Bleed:
  Easy to use and keeps valve box dry.
• Flow Control option:
  Adjusts the flow of each zone on a system to deliver optimum nozzle performance.
• Rigid Diaphragm support:
  Works to prevent stress failure in tough conditions.
• Common parts to other Hunter Valves:
  Diaphragm is interchangeable with PGV, SRV and ASV series 25mm valves; solenoid fits all Hunter plastic valves.
• Flow: 3.8 to 113.5 l/min
• Pressure: 138 to 1034 kPa
• Heavy-duty solenoid: 24VAC, 475mA inrush current, 230mA holding current, 50 cycles.

Any spray head body that uses female-threaded nozzles can have the ultimate in versatility with a aHunter nozzle. And the most versatile of the wide array of hunter nozlles is the Adjustable Arc nozzle. With an easy turn by hand – no tools for 25 to 360 degrees to keep the spray in the areas as designed. In addition, the radius can be reduced up to 25% without changing the pattern distribution. Thus, virtually any landscape needs can be met, including those areas that require custom arcs. Today, more and more landscapes are calling for a nozzle that can be precisely set to handle meandering walkways or atypical, hard-to-handle sharp angles. Why keep an inventory of the many different odd arc nozzles that you would seldom use? When you stock Hunter Adjustable Arc nozzles, you’ll always have just the right nozzle…no matter what the job is.

The Ideal Solution for Curving Landscapes

Most nozzles have been designed specifically to provide optimum efficiency at the standard angles of 90, 180 and 360 degrees. And while most expanses of turf call for the use of such nozzles, today more and more landscapes are requiring a nozzle that can deliver effective coverage to sites whose plot plans don’t fall into these standard angles. Irregularly shaped planter beds and meandering walkways create landscapes with odd angles that are in need of an irrigation solution that can provide effective coverage. Hunter Adjustable Arc nozzles can be set at any angle from 25 to 360 degrees, allowing sprinklers to be fine-tuned to exactly the precise pattern needed. You’ll never need worry about having to much coverage (eliminating the wasted water that would normally end up overshooting your lawn and land on the sidewalk) or too little (no more dry spots for those few extra degrees of grass that other nozzles can’t quite reach). Best of all, no tools are required to adjust the arc, it’s all done easily by hand.

Description

The Pro-Spray has been manufactured with the precision required to ensure reliable operation and peak performance for years to come. this solid performer boasts heavy-duty ABS construction, including an extra-thick body and cap. Exclusive body ribs make it easier to install, adjust and service while also providing more stabiltity for the sprinkler in loose soils. But brawn isn’t all this product offers. The sprinkler also features a user-friendly “pull ring” flush cap that helps keep debris to a  minimum and a multifunction wiper seal that eliminates flow-by. Add in its compatibility with all industry standard female nozzles – as well as Hunter’s own complete line-up of adjustable, fixed and specialty nozzles – and you have the industry’s most sophisticated spray sprinkler. A spray designed with the professional in mind.

Features

• Heavy-duty body and cap construction.
  Multi-thread buttress design withstands the harshest environments.
• Pressure activated, multi-function, no flow-by wiper seal.
  Easy to remove and clean; treated with UV inhibitors to ensure long life.
• Compatibility with all female threaded nozzles.
  Accepts adjustable, fixed and specialty nozzles from Hunter and all major brands.
• Optional Factory-installed drain check valve for up to 7 feet elevation change.
  Eliminates landscape damage from flooding and erosion.
• Ratcheting riser for quick arc alignment.
  Make adjustments while sprinkler is operating.
• Heavy-duty spring.
  For positive retraction under any conditions.
• Innovative “pull ring” flush plug design.
  Allows limited flow permitting controlled directional flushing.

Specifications

• Recommended pressure range: 103 to 482 kPa
• Flow-by: 0 at 68kPa or greater; 0.4l/min otherwise.
• Precipitation rates: approximately 38mm/hour.

When we spray sprinklers are used in irrigation systems, fast and easy installation are two of the most important concerns for the installer. Both of those concerns are put at ease when the choice is a Hunter Fixed Pattern nozzle. While there are many landscapes that require precise fine-tuning to achieve the optimum coverage, the vast majority of spray heads that install call for the use of standard angle nozzles…that is, full-circle half-circle and quarter-circle patterns. When installing nozzles along straight runs or in areas that require 360º arcs, labour will be saved by not having to adjust each nozzle to those common patterns. With patterns that feature precise edges, Hunter Fixed Pattern nozzles have been painstakingly designed to provide superior coverage and minimize wind drift. Eight different radius ranges are available, each able to be reduced if needed for fine-tuning and each colour-coded for quick and easy radius identification.

Full, Even Coverage Across Every Pattern

Every Hunter Fixed Pattern Nozzle has been precision engineered to ensure that the entire area of coverage receives its intended amount of water. Whether it is a quarter-, half- or full-circle pattern, the discharge from the nozzle features a consistent trajectory from all sides, which assures delivery at the same high level of performance in every direction. Hunter nozzles also are noted for emitting the optimum droplet size: large enough to avoid the problems of misting, small enough to provide nice, even distribution.

Description

Here’s the one sprinkler to carry when you want to carry just one. With its adjustable arc that creates arc patterns from 1 to 360 degrees, you’ll find there’s no need to stock hundreds of odd-pattern nozzles. Simply select and set the exact arc you need with the easy-to-use Hunter adjustment wrench, and you’ll keep water precisely where you want it and off buildings and hardscapes. No other spray sprinkler with a single nozzle is this versatile! Or as  dirt tolerant – the factory-installed extra-large filter screen traps the maximum amount of debris without interupting flow and is easily removed for cleaning. Fast and easy to set up, the PS is designed to fit your budget as effortlessly as it fits your landscape.

Features

• Adjustable arc nozzle included
  One nozzle does the job of many.
• Colour-coded nozzle ID ring
  Permits quick identification of radius in field.
• New improved nozzle design
  Even more dirt tolerant than before
• Heavy duty wiper seal
  Eliminates flow-by
• Super extra large filter screen
  Captures large debris without interupting flow
• Optional drain check valve
  Available for field installation

Specifications

• Discharge rate 0.8 to 20.1 l/min
• Radius 3.0 to 5.8m
• Recommended pressure range 137 to 275kPa
• Precipitation rate: approximately 35 to 43mm per hour

Pop-up Micro Spray Nozzles

The unique pop-up design of the Hunter Micro-Spray Nozzle, coupled with the fact that it attaches directly to a pop-up sprinkler, makes this alternative to drip a winner. When not in use, both the nozzle and spray head body retract, so nothing sticks up above the surface.

Short Radius Nozzles

Hunter Short Radius Nozzles permit well-controlled easy watering of planter boxes and bed areas. These nozzles (in 2-, 4-, and 6-foot radius versions) are just the answer for small spaces that have longed for a better solution than trying to drastically reduce the radius range on a nozzle designed for longer throws.

Strip Pattern Nozzles

To accomodate the needs of the long narrow planting strips, Hunter has the industry’s first left and right 1.5 x 4.6m corner strip nozzles, and a 1.5 x 9.1m side strip nozzle. All three nozzles can be adjusted down 25% without the loss of efficient pattern distribution.

Stream Spray Nozzles – S-8A and S-16A

Combining the convenience of customised arc selection and a lower appliction rate, this dial-setting, adjustable arc nozzle offers a stream spray that throws as far out as 5.5m at 276kPA. An outstanding nozzle to use on slopes and ground cover areas with tight soils that require a low precipitation rate.

Description:

The SRM is Hunter’s shortest-range rotor, and was designed to offer a convenient and efficient alternative to spray heads. It is capable of working in tandem with larger rotors to combine big and small areas in a single zone. Utilizing the SRM where appropriate results in fewer sprinklers performing more efficient work at a more economical price. The SRM features a rack of six water-efficient nozzles—all of which can be easily identified by its flow rates and installed and changed quickly and easily. This versatile rotor also includes a radius adjustment feature that fine-tunes the spray to keep water off driveways, walks, and other non-landscaped surfaces.

Features:

• Model: 10cm
• Arc setting: 40 to 360 degrees
• Nozzle choices: 6
• Nozzle range: 0.50 to 3.0
• Standard factory installed nozzle: 3.0 only
• Through-the-top arc adjustment
• QuickCheck arc mechanism
• Water lubricated gear-drive
• Warranty period 1 year

Operating Specifications:

Radius: 4.0 to 9.4m

Flow: 0.08 to 0.82 m³/hr; 1.4 to 13.7 l/min

Recommended pressure range: 1.7 to 3.8 bar; 170 to 380 kPa

Operating pressure range: 1.4 to 7.0 bar; 140 to 700 kPa

Precipitation rates: 11mm/hr approximately

Nozzle trajectory: 18° approximately

Applications:

• Residential
• Low Pressure Areas

Description:

Simple operation, reliable performance. The economical residential valve that can handle the toughest conditions. SRV features a durable high-grade PVC globe body plus a rugged diaphragm custom-crafted to withstand the challenge of vigorous day-to-day use. In addition, the SRV boasts a diaphragm support to prevent stress failure, an internal manual bleed to keep valve box dry, and the heavyduty Hunter solenoid. Plus, to meet the particular needs of each individual system you install, the SRV is available in either flow control or non-flow control models.

Features:

• Heavy-duty Hunter solenoid
  Provides dependable operation and long life.
• High grade construction.
  Made of durable PVC and stainless steel to resist wear.
• Internal manual bleed.
  Easy to use and keeps valve box dry.
• Optional flow control.
  Adjust the flow of each zone on a system.
• Optional slip configuration
  Permits direct colvent connection to PVC pipe.
• Rigid diaphragm support.
  Works to prevent stress failure in tough conditions.

Specifications:

• Flow: 3.8 to 114l/min
• Pressure: 138 to 1034kPa
• Heavy-duty solenoid: 24VAC, 475mA inrush current,
  230mA holding current, 50 cycles.

Description:

If the thought of running wires from a controller has kept you from adding rain sensors to your systems, now there’s a hassle-free alternative. The Hunter Wireless Rain-Clik™ attaches quickly and easily – simply install the transmitter anywhere that the device can receive representative rainfall. No ladders needed to attach to a high outcropping on a building, no messy wires to hide out of view. What also sets a Hunter Rain-Clik™ apart are features no other rain-sensing device offers. The unique Quick Response™ feature allows the product to shut off immediately when it starts to rain. And, unlike its competition, Hunters sophisticated sensing mechanism cannot be
fouled by debris, giving the Wireless Rain-Clik™ the most highly accurate operation.

Features:

• Hassle free, wire-free easy installation:
  Simple to add on to a new or existing installation
• Hunter’s unique Quick Response™ feature:
  No need for water to accumulate for shutoff.
• Modular mounting options:
  Variety of choices depending on the job site; gutter or wall mounts.
• Set a maximum dry-out period:
  Adjust the irrigation re-start to account for varying amount of rain.
• Operates up to 300′ from the reciever unit:
  Typical wired system limitations vanish.
• Maintenance-free patented sensing mechanism:
  Built-in bypass switch on receiver panel.
• Retrofit with ease:
  Installs on any system in minutes, no stringing or wiring.

Specifications:

• Wiring: normally closed or normally open
• Time to turn off irrigation system: 2 to 5 minutes for Quick Response
• Time to reset Quick Response unit: 4 hours maximum under dry sunny conditions
• Time to reset: 3 days maximum under dry sunny conditions for the total rainfall compensation unit
• Operating temperature: 0°C to 54°C
• Vent ring allows for adjustment of reset delay
• UV colourfast and stable
• UL listed, FCC/DOC approved, suitable for use in Australia, CUL (CSE), CE
• Rain sensor transmitting range: up to 300 feet line of sight

Electrical Specifications:

• Receiver power: 22-28VAC/VDC, 100mA (from timer transformer)
• Receiver includes built-in bypass switch, no extra switch requuired
• Works with all standard controllers

The Hunter X-Core Controller is the most popular automatic controller for residential homes and gardens.

Number of stations: 4, 6, 8
Type: Fixed
Enclosures: Indoor and outdoor
Independent programs: 3
Start times per program: 4
Max. station run time: 4 hrs
Warranty period: 2 years

Save water and money by installing a Solar Sync weather sensor.

• Cycle and Soak
• Seasonal Adjust
• Water -saving features

Application

Weld-On C-65 Cleaner is a clear, reduced VOC emissions, water-thin, free flowing solvent system. It is specifically formulated to remove grease, oil and dirt from the bond surfaces of PVC, CPVC, ABS and Styrene pipe and fittings. It is approved for FlowGuard® Gold™ CTS plumbing systems. It is not to be used in place of primer.

Weld-On C-65 is an all purpose cleaner and can be used on all sizes, classes and schedules of PVC, CPVC, ABS and Styrene pipe and fittings. It is to be used only as a cleaner, in conjunction with the appropriate primer and/or cement combination. It also has been used as a brush cleaner.

Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructions supplied by the pipe and fitting manufacturer.

Specifications

• Colour: Grey
• Resin: PVC
• Specific Gravity: 0.946± 0.040
• Brookfield Viscosity: Minimum 2000 cps @ 73±2ºF
• Max VOC Emissions: 600G/L per SCAQMD Rule 1168, Method 316A

Shelf Life

The shelf life expectancy of this product in tightly sealed containers is unlimited. Stability of the product is limited by the permanence of the container and the evaporation of the solvent when container is open.It should be used as received in its original container. Adding of solvents or other foreign materials is not recommended.

Standards and Approvals:

Weld-On C-65 meets SCAQMD Rule 1168/316A

Important Note:

This product is intended for use by skilled individuals at their own risk. These suggestions and data are based on information we believe to be reliable. Installers should verify for themselves that they can make satisfactory joints under varying conditions. Toward this end, it is highly desirable that they receive personal instruction from trained instructors or competent, experienced installers. Contact us or your supplier for additional information or instruction.

DANGER – EXTREMELY FLAMMABLE – VAPOUR HARMFUL
MAY BE HARMFUL IF SWALLOWED – MAY IRRITATE SKIN OR EYES

Application

Weld-On P-68 Primer is a purple or clear, reduced VOC emissions,nonbodied, fast acting, water-thin solvent. It is distinctly coloured purple so detection of its use in a joint can be made. The strong action of P-68 Primer softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings very rapidly.

Weld-On P-68 Primer, when used in conjunction with appropriate Weld-On cements, will make consistently strong, well fused joints. It is essential that the joining surfaces of pipe and fittings be softened prior to assembly. The main function of this primer is to expedite the penetration and softening of thee surfaces. Its rate of penetration into the joining surfaces is much more rapid than that of cement alone. It is suitable for use with all types, classes and schedules of PVC and CPVC pipe and fittings.

Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructions supplied by the pipe and fitting manufacturer.

Specifications

• Colour: Purple or clear
• Specific Gravity: 0.845± 0.040
• Viscosity: Water-thin
• Max VOC Emissions: 650G/L per SCAQMD Rule 1168, Method 316A

Shelf Life

3 year expectancy in tightly sealed containers. The date of the manufacturer is stamped on the bottom of the container. Stability of the product is limited to the permanence of the container and the evaporation of the solvent when container is open.

Standards and Approvals:

Weld-On P-68 meets ASTM F-656, SCAQMD Rule 1168/316A and is listed by NSF International for use on potable water, sewer, drain, waste and vent systems. P-68 Purple only is listed by the International Association of Plumbing & Mechanical Officials (IAPMO) and carries the Uniform Plumbing Code (UPC) seal. This primer is suitable for use with PVC and CPVC piping systems approved by (SBCC) Southern Building Code Congress and (BOCA) Building Officials Congress of America.

Important Note:

This product is intended for use by skilled individuals at their own risk. These suggestions and data are based on information we believe to be reliable. Installers should verify for themselves that they can make satisfactory joints under varying conditions. Toward this end, it is highly desirable that they receive personal instruction from trained instructors or competent, experienced installers. Contact us or your supplier for additional information or instruction.

DANGER – EXTREMELY FLAMMABLE – VAPOUR HARMFUL
MAY BE HARMFUL IF SWALLOWED – MAY IRRITATE SKIN OR EYES

Application

Weld-On 711 is a grey, heavy bodied, medium setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings through 300mm diameter, including Schedule 80. It has good gap filling properties and its medium set allows more working time in warm weather. Weld_on 711 is for use on all types of PVC plastic pipe applications, Type I and Type II. Water pressure systems, irrigation, turf, conduit, industrial pipe applications, sewer, drain, waste and vent systems. Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructios supplied by the pipe and fitting manufacturer. NOTE: IPS Weld-On solvent cements must never be used in a PVC system using or being tested by compressed air or gases.

Specifications

• Colour: Grey
• Resin: PVC
• Specific Gravity: 0.946± 0.040
• Brookfield Viscosity: Minimum 2000 cps @ 73±2ºF
• Max VOC Emissions: 600G/L per SCAQMD Rule 1168, Method 316A

Shelf Life

3 years expectancy in tightly sealed containers. The date of manufacture is stamped on the bottom of the container. Stability of the product is limited by the permanence of the container and the evaporation of the solvent when container is open. Evaporation of solvent will cause the cement to thicken and reduce its effectiveness. Adding thinners to change the viscosity is not recommended.

Standards and Approvals:

Weld-On 711 meets ASTM D-2564 and is listed by NSF International for use on potable water, sewer, drain, waste and vent systems. It is listed by the International Association of Plumbing & Mechanical Officials (IAPMO) and carries the Uniform Plumbing Code (UPC) seal. Weld-On 711 is listed by the Canadian Standards Association (CSA) for pressure and non-pressure applications. This cement is suitable for use with PVC piping systems approved by (SBCC) Southern Building Code Congress and (BOCA) Building Officials Congress of America.

Important Note:

This product is intended for use by skilled individuals at their own risk. These suggestions and data are based on information we believe to be reliable. Installers should verify for themselves that they can make satisfactory joints under varying conditions. Toward this end, it is highly desirable that they receive personal instruction from trained instructors or competent, experienced installers. Contact us or your supplier for additional information or instruction.

DANGER – EXTREMELY FLAMMABLE – VAPOUR HARMFUL
MAY BE HARMFUL IF SWALLOWED – MAY IRRITATE SKIN OR EYES

Application

Weld-On Wet ‘R Dry 725 is an aqua blue, medium bodied, extremely fast setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings with interference fit through 150mm diameter, Schedule 80 through 100mm diameter. Can be used without primer on non-pressure systems if local codes permit.

Weld-on Wet ‘R Dry 725 is for use on rigid and flexible PVC pipe and fittings. It is specially formulated for applications where conditions are very wet and/or quick pressurisation is neccessary, use only Wet ‘R Dry P-75 Primer with Wet ‘R Dry Cement.

Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructios supplied by the pipe and fitting manufacturer.

NOTE: IPS Weld-On solvent cements must never be used in a PVC system using or being tested by compressed air or gases.

Specifications

• Colour: Aqua Blue
• Resin: PVC
• Specific Gravity: 0.924± 0.040
• Brookfield Viscosity: Minimum 600 cps @ 73±2ºF
• Max VOC Emissions: 600G/L per SCAQMD Rule 1168, Method 316A

Shelf Life

3 years expectancy in tightly sealed containers. The date of manufacture is stamped on the bottom of the container. Stability of the product is limited by the permanence of the container and the evaporation of the solvent when container is open. Evaporation of solvent will cause the cement to thicken and reduce its effectiveness. Adding thinners to change the viscosity is not recommended.

Standards and Approvals:

Weld-On Wet ‘R Dry meets ASTM D-2564 and is listed by NSF International for use on potable water, sewer, drain, waste and vent (DWV) systems. It is listed by the International Association of Plumbing & Mechanical Officials (IAPMO) and carries the Uniform Plumbing Code (UPC) seal. This cement is suitable for use with PVC piping systems approved by (SBCC) Southern Building Code Congress and (BOCA) Building Officials Congress of America.

Important Note:

This product is intended for use by skilled individuals at their own risk. These suggestions and data are based on information we believe to be reliable. Installers should verify for themselves that they can make satisfactory joints under varying conditions. Toward this end, it is highly desirable that they receive personal instruction from trained instructors or competent, experienced installers. Contact us or your supplier for additional information or instruction.

DANGER – EXTREMELY FLAMMABLE – VAPOUR HARMFUL
MAY BE HARMFUL IF SWALLOWED – MAY IRRITATE SKIN OR EYES

Application

Weld-On 2767 is a green, medium bodied, fast set, very high strength solvent cement for cementing all schedules and classes of PVC pressure and non-pressure pipe and fittings through 150mm.

Weld-On 2767 is for use on all types of PVC plastic pipe applications, Type I and Type II. It is suitable for use on potable and non-potable water pipe, turf irrigation pipe, conduit, duct, sewer and drain, waste and vent systems.

Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructios supplied by the pipe and fitting manufacturer.

Specifications

• Colour: Green
• Resin: Must be virgin PVC
• Specific Gravity: 0.955± 0.040
• Brookfield Viscosity: Minimum 400-800 cps @ 23°±1.7ºC

Shelf Life

3 years expectancy in tightly sealed containers. The date of manufacture is stamped on the bottom of the container. Stability of the product is limited by the permanence of the container and the evaporation of the solvent when container is open. Evaporation of solvent will cause the cement to thicken and reduce its effectiveness. Adding thinners to change the viscosity is not recommended.

Standards and Approvals:

Weld-On 2767 meets ASTM D 2564 and the requirements of the Australian/New Zealand standard (AS?NZS) 3879 for Type P solvent cement.

Dangerous Goods Shipping Information:

• Proper Shipping Name: Adhesives
• DOT/IATA Hazard Class: 3
• IMO Hazard Class: 3.2
• Identification Number: UN 1133
• Packaging Group: II

Application:

Designed for use in all irrigation systems, turf, landscape and agricultural watering projects.

Features:

• Globe and Angle configuration for flexibility in design and installation for 40 and 50mm valves.
• Rugged PVC construction to withstand constant 1033kPa pressure and 19 – 378 LPM.
• Slow closing to prevent water hammer.
• Internal Manual bleed.
• Flow control.
• Accepts latching solenoid for use with battery operated controllers (model: DC/LC E2002).
• Operating Range:
  • Pressure: 100 – 1034 kPa.
  • Flow: 19 – 378 LPM.

Specifications:

• 24VAC cycle solenoid power requirement: 0.41 A inrush current, 0.23 A holding current.
• Ribbed, heavy duty PVC contruction for UV resistance and corrosion protection.
• Durable heavy duty moulded diaphragm.

Jet Pumps manufactured in stainless steel AISI 304, suitable for water supply, domestic pressure boosting, small irrigation systems, pool and tank emptying and general clean water pumping

Technical Data

• • Flow rates from 10 – 70 litres/min
  • Pressure upto 5.5bar

Description

Kwikcut is a Plastic Pipe and Hose Cutter designed to meet the needs of the professional.

Application

The rotating / rocking technique produces fast, easy cuts, together with being small and lightweight, saves hours of time and effort. It is ideally suited to a limited working space, the cutter adapts easily where a conventional hacksaw cannot be used. Kwikcut produces no cutting residue, eliminating deburring and the possibility of contaminating the pipe. This clean, smooth cut allows quick and easy connections for a neat, professional installation.

Features

• Replaceable high-carbon, Teflon coated steel blade.
• Blade closes into its own handle for safe carrying and handling.
• Tough, durable nylon handles.
• Tool pouch available.

The Lance Jets(I) are small and medium size nozzles capable of achieving a maximum height of 14 metres.

Integral ball joint allows to get parabolic or vertical jets, offering a large range of water displays.

The Lance Jets(II) are large size nozzles capable of achieving a maximum height of 140 metres.

Swivel connection allows to get parabolic or vertical jets, offering a wide range of water displays.

Visible from medium to great distances.

Submersible pumps for solid-laden wastewater. Made in stainless steel, with mechanical seal and versions with twin-channel impeller, Vortex impeller, and grinder impeller. Supplied with or without float switch.

APPLICATIONS:

• Emptying of septic tanks and residential sumps
• Pumping of effluent (the VX version also pumps suspended filaments)
• Emptying of wells and tanks in industrial and ecological applications
• Emptying of tanks or reservoirs
• Emergency draining in flooded areas

SPECIFICATIONS:

Delivery: up to 40 m3/h
Head: up to 14.5 m
Power supply: three-phase and single-phase 50 and 60 Hz
Power: 0.55 kW to 1.5 kW
Maximum immersion depth: 5 m
Temperature of pumped liquid: 0°C to +35°C (with pump totally immersed)
Shaft extension: Stainless steel
Liquids with suspended solids:
– up to 35 mm (Domo 7-Domo 7VX)
– up to 50 mm (Domo 10-15-20 and Domo10-15-20VX)

Version with grinder impeller (DOMO GRI)
Insulation class: F (motor dry)
Protection: IP68
Length of cable: 10 m (except Domo 7,5 m)

MATERIALS:

Pump body, motor casing: Stainless steel
DOMO 7 (VX) impeller: Reinforced nylon
DOMO 10-15-20 (VX) impeller: Stainless steel
DOMO GRI impeller: Technopolymer PBT, stainless steel and high resistance Grinder.
Inner mechanical seal: Silicon-carbide/Silicon-carbide
Lubrificated by the DRIVELUB System
Upper lip seal: NBR
Shaft extension: Stainless steel
Handle: Nylon

MODELS: DOMO, DOMO VX, DOMO GRI

Submersible vertical electric pumps
Immersible vertical electric pumps for the industrial and commercial sectors.

Specifications:

Delivery: up to 120 m3/h
Head: up to 240 m
Power supply: three-phase and single-phase 50 and 60 Hz
Power: 0.30 kW to 22 kW
Maximum operating pressure: 25 bar
Temperature of pumped liquid: 10°C to +90°C

Application:

Pumping of coolants, lubricants and condensate
Machine tools, welders, engine test stands
Cooling systems
Washing systems
Irrigation – pontoon mount
Water supply / stock watering – pontoon mount

Materials:

Impeller, diffuser, shaft, outer sleeve: stainless steel
Mechanical seal: Ceramic/Carbon/FPM
Elastomers: FPM

Multi-stage centrifugal submersible pumps for clean water in 6” wells

Lowara multi-stage centrifugal submersible pumps for clean water in 6” wells. Made of AISI 304 or AISI 316 stainless steel.
These durable and lightweight pumps assure high-efficiency, low maintenance costs and ease of management. Their main characteristics include the possibility of replacing the impeller inlet wear ring. Available in the high-pressure version to guarantee heads of up to 700 metres. Can be coupled to all NEMA standard motors.

Specifications:

Delivery: up to 78 m3/h
Head: up to 700 metres (high-pressure version)
Power supply: three-phase 50 and 60 Hz
Three-phase version: 380-415 V
Power: 0.55 kW to 55 kW
Can be coupled with L4C, L6W and L8W three-phase asynchronous motors in a coolant bath.

Maximum overall diameter of pump (two cable covers included):
144 mm (standard version)
195 mm (high-pressure version)

Water temperature: 0°C to +60°C (depending on the limits of the associated motor)
Maximum permissible quantity of suspended sand: 100 g/m3

Applications:

• Water supply
• Pressure boosting
• Irrigation
• Fire-fighting
• Mining industry
• Golf
• Groundwater level control

Materials:

Delivery port, non-return valve, diffuser, impeller, cable cover, lower support, pump shaft, coupling, spacer, screws, tie-rods: Stainless steel
Thrust bearing: PTFE
Wear ring: Technopolymer PPO
Upper bearing: tungsten carbide
Shaft guide bearing: polyurethane
Elastomers: EPDM

Multi-stage submersible centrifugal electric pumps for clean water in 10-12” diameter wells and larger
Lowara submersible borehole pumps for 10″ & 12″ wells. Made in cast iron and 304SS. Impeller or entire pump available in bronze on request. Built-in non-return valve. The guide bearings and wear rings assure high resistance to wear and long-term constancy and reliability of hydraulic characteristics. Can be coupled to all NEMA-standard motors.

Specifications:

Delivery: up to 520 m3/h
Head: up to 345 metres
Power supply: three-phase 50 and 60 Hz
Power: 11 kW to 300 kW
Maximum immersion depth: 350 metres (depending on LW motor)
Temperature of water: 0°C to +60°C (depending on the configuration of the motor)
Maximum permissible quantity of suspended sand: 50 g/m3

Applications:

Water distribution in civil and industrial systems
Pressure boosting
Irrigation
Fire-fighting
Mining industry
Groundwater level control

Materials:

Delivery head/valve casing: Stainless steel
Diffuser: Stainless steel
Impeller: Stainless steel
Taperlock: Duplex stainless steel
Suction screen: Stainless steel
Pump shaft: Stainless steel
ZR version: available in DUPLEX

All-purpose full – to part- circle sprinkler 1 1/4” male giant sprinkler

Applications

Large fields and plantations (tea gardens and coffee)

Main features

• Easily attached full- to part-circle mechanism
  for stock saving and easy maintenance
• Low angle 21º for highly effective irrigation under wind conditions
• Extra coverage and distribution uniformity with
  unique triple-nozzle overlapping design
• High water distribution with spacing up to 40 m

Low-volume undertree ball-driven sprinkler 1/2” male

Applications

• For orchards, vineyards and banana plantations

Main features

• Closed and protected sprinkler made of extra-strong plastic compounds
• Excellent water distribution at low pressure and precipitation
• Colour-coded plastic nozzles for easy operation and service

Description

Mazzei Injectors (patented) are extremely efficient, compact differential injection devices. Currently operating successfully in thousands of installations worldwide, Mazzei Injectors offer a reliable, accurate, and economical method to inject virtually any liquid or gas substance into a pressurised fluid stream.

Application

The highly versatile Mazzei Injectors are suitable for a wide variety of applications.

Agriculture

• Ag Irrigation Systems – to inject fertilisers and other chemicals or water treatment additives.
• Ag Spray Systems – for mixing and/or the transfer of concentrated pesticide materials.
• Food Processing – for water chlorination, injection of detergents, bacterial agents, other water treatment purification additives.

Home and Garden

• Irrigation Systems – for application of liquid fertiliser through landscape sprinkler or drip irrigation systems, hose end sprinklers and/or spray nozzles. (Check Local codes)

Industrial/Commercial

• Water Treatment – to inject air, liquids, gases (ozone), and other water purification chemicals for cooling tower or other water or fluid recirculatory systems, waste water systems, potable water systems.
• Washing & Cleaning – to inject detergents, solvents, and other cleaning agents into carpet cleaning equipment, car wash systems, dishwashing equipment and other industrial cleaning processes.

Features

• Molded from high quality thermoplastics with superior strength, high temperature capability, resistant to most chemicals.
• No moving parts, low-maintenance trouble-free operation.
• Unique design allows maximumcavitation in the injection chamber, thereby providing instantaneous mixing
• Ideally suited for continuous mixing functions, require no secondary blending devices.
• Initial cost and installation cost are low
• Powered by the motive fluid, no external energy required for most instllations.
• Available in a broad range of sizes, flows and injection capacities.

Application:

Mini control valve for use in drip or spray/jet home watering systmes.

Specifications:

• Three Models: 13mm Barb
  20mm Barb
  20mm Male BSP
• Internal filter
• Can be used with low density polyethylene
• Simple operation allows trouble free performance
• Heavy duty engineering plastic construction
• Australian made
• Other voltages and diaphragm pipes available
• Working pressure range 20-1400kPa

Electrical Specifications:

• Solenoid: 24volt AC, 50Hz
• Inrush current: 0.5amp
• Holding current: 0.33amp

Economical to run, very low maintenance

The pumps unique Vortex impeller design alleviates the need for a foam pre-filter and drastically reduces in-pond maintenance.

• Specially designed for use with external filter systems
• Energy saving
• Suitable for use in dirty water through the Vortex impeller
• Wear-resistant ceramic bearings for continuous and trouble free use
• Overload protection by means of a thermal overload trip
• Economical to run due to high efficiency
• Simple maintenance with removable rotor assembly
• Suitable for submersible or non-submersible use

Applications:

Easy twist-in insertion elbow used in all landscape watering systems. makes a quick flexible swing joint.

Features:

• No clamps or glue
• 15mm and 20mm Male thread for sprinkler
• Can be used to install a flexible lateral line.
• Positive leak proof seal.
• Can be used on side or bottom inlet sprinkler.
• Makes swing joint using EZ-Tube
• Maximum flow rate 30LPM
• Maximum operating pressure 689kPA
• Colour – blue made from engineering grade polymer.

Application

Designed for use in joining plastic piping systems where frequent disassembly may be required. Suitability of application is at the discretion of the user.

Features

• Single body
• PVC construction, heavy body
• Table D drilling

Specifications

• 50 – 150mm metric sizing
• Bolt hole pattern AS/NZS 1477
• Maximum pressure 1033kPa at 25º Celcius

The Orange Pumps UP300 petrol engine drive utility pump has been developed to combine high pressure, high volume and excellent self priming. The pump was developed in Melbourne over many years by an experienced team of engineers for fighting fires and other water transfer applications. Engine: Orange 100cc

Orange Pumps has developed a unique range of engine driven pumps for fighting fires and other water transfer applications by combining high pressure, high volume and excellent self priming. The Utility Pump has been developed in Melbourne over many years by an experienced team of engineers.
Integral to the design of the pump is the torque tuned impeller which maximises the engines horse power enabling more pressure to be delivered with every increase in revolution of the shaft. The UP range is unique in the market by delivering up to 120 metres of pressure from a single impeller.
Pressure is only really useful when it is delivering volume and the UP range can do both. The wide vanes on the impeller can allow large volumes of water to pass through. The UP range can produce up to 550 litres per minute or around 250 litres per minute at an operating pressure of 60 metres.

Self priming quickly is critical for fire fighting applications. The UP range of pumps use a single impeller which out performs twin impeller units when priming. The UP range can prime in under 1 minute with a 3½ metre vertical lift, which is five times quicker than the industry average and even higher for twin impeller pumps.
The impeller is constructed from a single piece of cast aluminium which is far stronger and more reliable than impellers that are glued, bolted or riveted together. Each impeller has been balanced and tested to reduce wear and tear on the engine bearings caused by shaft movement from non-concentric forces. The impeller features a self clearing, wide vane for small solids handling.
The Utility Pump can be used in Deep Well applications by connecting the smaller pressure pipe going down the bore to one of the discharge ports on the flange. A DC79-20 or DC54-20 deep well kit is recommended depending on the depth.

UP Range Features:
Recognized Engine Manufacturer
Torque tuned Impeller
Impeller balanced and tested
Single cast wide vane Impeller
Impeller clearing vanes
Dual threads
Built in check valve
Single cast Diffuser
Deep Well Kit DC79-20 or DC54-20

UP Range Benefits:
Strength and reliability
Proven engine reliability
High volume and high pressure
Twin impeller pressures from a single impeller
Easy to prime
Quick suction performance
Longer engine bearing life
Small solids handling
Choice of pipe threads

UP Range Specifications:
Orange 100cc
Inlet – 50mm (M) or 40mm (F)
Outlets – 25mm (M) x 2 & 50mm (M) or 40mm (F)
Priming – 25mm (M)
M: Male thread F: Female thread

The Orange Pumps UP500 petrol engine drive utility pump has been developed to combine high pressure, high volume and excellent self priming. The pump was developed in Melbourne over many years by an experienced team of engineers for fighting fires and other water transfer applications.

Engine: Honda GP160

Self priming quickly is critical for fire fighting applications. The UP range of pumps use a single impeller which out performs twin impeller units when priming. The UP range can prime in under 1 minute with a 3½ metre vertical lift, which is five times quicker than the industry average and even higher for twin impeller pumps.

The impeller is constructed from a single piece of cast aluminium which is far stronger and more reliable than impellers that are glued, bolted or riveted together. Each impeller has been balanced and tested to reduce wear and tear on the engine bearings caused by shaft movement from non-concentric forces. The impeller features a self clearing, wide vane for small solids handling.
The Utility Pump can be used in Deep Well applications by connecting the smaller pressure pipe going down the bore to one of the discharge ports on the flange. A DC79-20 or DC54-20 deep well kit is recommended depending on the depth.

UP Range Features:
Recognized Engine Manufacturer
Torque tuned Impeller
Impeller balanced and tested
Single cast wide vane Impeller
Impeller clearing vanes
Dual threads
Built in check valve
Single cast Diffuser
Deep Well Kit DC79-20 or DC54-20

UP Range Benefits:
Strength and reliability
Proven engine reliability
High volume and high pressure
Twin impeller pressures from a single impeller
Easy to prime
Quick suction performance
Longer engine bearing life
Small solids handling
Choice of pipe threads

UP Range Specifications:
Honda GP160
Inlet – 50mm (M) or 40mm (F)
Outlets – 25mm (M) x 2 & 50mm (M) or 40mm (F)
Priming – 25mm (M)
M: Male thread F: Female thread