All Products

Reliable All Products

Welcome to the All Products range at Allabout Pumps & Pipes where everything we stock can be sourced for you from our reliable suppliers.

During these uncertain times as the world is changing around us, our extensive product range varies to suit any situation possible. So, if you don’t see what you need, or require advice on a product, contact us. One of our friendly team will be more than happy to help you as they are experienced in all areas of the business.

Our team believes in absolute quality, durability and being reliable and these are qualities that we seek when utilising the best suppliers and the best products. Taking this into consideration, we all know, Australia has some of the harshest weather conditions. So, in order to make it easier on our customers, we as a team aim to find and source the best products out there.

So, take your time, have a browse and click on the pictures to see more information in this product catalogue. But please be advised, that this is NOT an online shopping site. If you do need help with any project big or small, or are looking to find a item, just contact us. Our friendly staff are very knowledgeable in what they do and will be able to assist with any information that you need.

0 items in cart
or empty cart

IPS Weld-On Solvent 725

IPS Weld-On Solvent 725 Image

Application

Weld-On Wet ‘R Dry 725 is an aqua blue, medium bodied, extremely fast setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings with interference fit through 150mm diameter, Schedule 80 through 100mm diameter. Can be used without primer on non-pressure systems if local codes permit.

Weld-on Wet ‘R Dry 725 is for use on rigid and flexible PVC pipe and fittings. It is specially formulated for applications where conditions are very wet and/or quick pressurisation is neccessary, use only Wet ‘R Dry P-75 Primer with Wet ‘R Dry Cement.

Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructios supplied by the pipe and fitting manufacturer.

NOTE: IPS Weld-On solvent cements must never be used in a PVC system using or being tested by compressed air or gases.

Specifications

  • Colour: Aqua Blue
  • Resin: PVC
  • Specific Gravity: 0.924± 0.040
  • Brookfield Viscosity: Minimum 600 cps @ 73±2ºF
  • Max VOC Emissions: 600G/L per SCAQMD Rule 1168, Method 316A

Shelf Life

3 years expectancy in tightly sealed containers. The date of manufacture is stamped on the bottom of the container. Stability of the product is limited by the permanence of the container and the evaporation of the solvent when container is open. Evaporation of solvent will cause the cement to thicken and reduce its effectiveness. Adding thinners to change the viscosity is not recommended.

Standards and Approvals:

Weld-On Wet ‘R Dry meets ASTM D-2564 and is listed by NSF International for use on potable water, sewer, drain, waste and vent (DWV) systems. It is listed by the International Association of Plumbing & Mechanical Officials (IAPMO) and carries the Uniform Plumbing Code (UPC) seal. This cement is suitable for use with PVC piping systems approved by (SBCC) Southern Building Code Congress and (BOCA) Building Officials Congress of America.

Important Note:

This product is intended for use by skilled individuals at their own risk. These suggestions and data are based on information we believe to be reliable. Installers should verify for themselves that they can make satisfactory joints under varying conditions. Toward this end, it is highly desirable that they receive personal instruction from trained instructors or competent, experienced installers. Contact us or your supplier for additional information or instruction.

DANGER – EXTREMELY FLAMMABLE – VAPOUR HARMFUL
MAY BE HARMFUL IF SWALLOWED – MAY IRRITATE SKIN OR EYES

Product Inquiry Form

    Your Name (required)

    Your Email (required)

    Inquiry Product Name

    Your Message

    IPS Weld-On Solvent 725

    IPS Weld-On Solvent 725 Image

    Application

    Weld-On Wet ‘R Dry 725 is an aqua blue, medium bodied, extremely fast setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings with interference fit through 150mm diameter, Schedule 80 through 100mm diameter. Can be used without primer on non-pressure systems if local codes permit.

    Weld-on Wet ‘R Dry 725 is for use on rigid and flexible PVC pipe and fittings. It is specially formulated for applications where conditions are very wet and/or quick pressurisation is neccessary, use only Wet ‘R Dry P-75 Primer with Wet ‘R Dry Cement.

    Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructios supplied by the pipe and fitting manufacturer.

    NOTE: IPS Weld-On solvent cements must never be used in a PVC system using or being tested by compressed air or gases.

    Specifications

    • Colour: Aqua Blue
    • Resin: PVC
    • Specific Gravity: 0.924± 0.040
    • Brookfield Viscosity: Minimum 600 cps @ 73±2ºF
    • Max VOC Emissions: 600G/L per SCAQMD Rule 1168, Method 316A

    Shelf Life

    3 years expectancy in tightly sealed containers. The date of manufacture is stamped on the bottom of the container. Stability of the product is limited by the permanence of the container and the evaporation of the solvent when container is open. Evaporation of solvent will cause the cement to thicken and reduce its effectiveness. Adding thinners to change the viscosity is not recommended.

    Standards and Approvals:

    Weld-On Wet ‘R Dry meets ASTM D-2564 and is listed by NSF International for use on potable water, sewer, drain, waste and vent (DWV) systems. It is listed by the International Association of Plumbing & Mechanical Officials (IAPMO) and carries the Uniform Plumbing Code (UPC) seal. This cement is suitable for use with PVC piping systems approved by (SBCC) Southern Building Code Congress and (BOCA) Building Officials Congress of America.

    Important Note:

    This product is intended for use by skilled individuals at their own risk. These suggestions and data are based on information we believe to be reliable. Installers should verify for themselves that they can make satisfactory joints under varying conditions. Toward this end, it is highly desirable that they receive personal instruction from trained instructors or competent, experienced installers. Contact us or your supplier for additional information or instruction.

    DANGER – EXTREMELY FLAMMABLE – VAPOUR HARMFUL
    MAY BE HARMFUL IF SWALLOWED – MAY IRRITATE SKIN OR EYES

    Call Now ButtonCall Us