Here at Allabout Pumps & Pipes we have cable joiners and connectors to suit your situation when it comes to your projects. Our range can vary at times, so if you don’t see what you need, or require advice on a product, just contact us. One of our friendly team will be more than happy to help you.
We only utilise the best suppliers so we can pass on these quality products to our customers. So, if you need help securing your cables and you are not sure which connectors to get, then we have a great selection of cable joiners and connectors for you.
As a business we believe there are strong reasons to buy products from us. Our extensive range offers quality, excellent reliability, durability and efficiency. In turn, this results in lower operating costs and absolute peace of mind for our customers which is our core focus.
Please be advised that this is not a shopping site. If you need help with any project big or small, or are looking to find a product, just contact us. Our friendly staff at Allabout Pumps & Pipes will be able to assist with any information that you need on cable joiners, connectors and more.
Application
Use 3M Brand 314 to electrically connect two or three wire ends, insulate the connection and provide a moisture resistant seal. Recommended for use with low energy underground circuit wires, Sprinkler Systems, Landscape Lighting or other moisture resistant wires for applications of less than 30 volts.
Features:
- Self stripping
- Moisture resistant seal
- Can be crimped using slip joint pliers
- Used with insulated copper conductors
- Specifications:
- U-contact tin plated brass 0.5mm thick
- Insulator flame retardent nylon
- Black cap, white body
- Temperature 105°C
- Maximum voltage 30VAC
- Sealant mineral oil base EG-3 Grease
- Voltage rating 30VAC
Wire Range:
- 0.5mm² – 1.0mm² solid or stranded copper conductors with a maximum insulation 3.8mm
- Joins 2 or 3 unstripped conductors up to 1.0mm²
Application
Use 3M Brand 316 to electrically connect two or three wire ends, insulate the connection and provide a moisture resistant seal. Recommended for use with low energy underground circuit wires, Sprinkler Systems, Landscape Lighting or other moisture resistant wires for applications of less than 30 volts.
Features:
- Self stripping
- Moisture resistant seal
- Can be crimped using slip joint pliers
- Used with insulated copper conductors
Specifications:
- U-contact tin plated brass 0.5mm thick
- Insulator flame retardent nylon
- Black cap, white body
- Temperature 105ºC
- Maximum voltage 30VAC
- Sealant mineral oil base EG-3 Grease
- Voltage rating 30VAC
Wire Range:
- 0.5mm² – 1.5mm² solid or stranded copper conductors with a maximum insulation 4mm
- Joins 2 or 3 unstripped conductors up to 1.5mm²
Application
Use part DBR, which includes a Scotchlok® Y Electrical Spring Connector, to electrically connect two or more pre-stripped copper wire ends in a pigtail application and moisture seal the connection for direct burial.
Specifications:
- Connector – steel spring, shell, flame retardent PVC insulator
- Temperature 105ºC
- Maximum voltage 30VAC
- Gel – Thixotropic callium organic complex
- Voltage rating 30VAC
- Tube – Polypropylene
- Not for use in direct ultraviolet exposure
- Do not store above 49ºC
Wire Range:
| 2-3 X 2.5MM | 1 X 2.5MM TO 1 X 2.0MM |
|---|---|
| 2-4 x 2.0mm | 1 x 2.5mm to 1 or 2 x 1.5mm |
| 3-4 x 1.5mm | 1 x 2.0mm to 1-3 x 2.0mm |
| 4-6 x 1.0mm | 1 x 2.0mm to 2 or 3 x 1.0mm |
| 1-2 x 4.0mm | 1 x 1.5mm to 2 or 3 x 1.0mm |
Application
Use part DBY, which includes a Scotchlok® Y Electrical Spring Connector, to electrically connect two or more pre-stripped copper wire ends in a pigtail application and moisture seal the connection for direct burial.
Specifications:
- Connector – steel spring, shell, flame retardent PVC insulator
- Temperature 105°C
- Maximum voltage 30VAC
- Gel – Thixotropic callium organic complex
- Voltage rating 30VAC
- Tube – Polypropylene
- Not for use in direct ultraviolet exposure
- Do not store above 49ºC
Wire Range:
| 2-3 X 2.5MM | 1 X 1.0MM TO 1-2 X 1.5MM |
|---|---|
| 2-3 x 1.5mm | 1 x 1.0mm to 1-2 x 2.0mm |
| 2 x 2.0mm | 1 x 1.0mm to 1-2 x 2.0mm |
| 2 x 2.5mm | 1 x 1.5mm to 1 x 2.0mm |
Application
Use 3M Brand UBI to electrically connect two or three wire ends, insulate the connection and provide a moisture resistant seal. Recommended for use with low energy underground circuit wires, Sprinkler Systems, Landscape Lighting or other moisture resistant wires for applications of less than 30 volts.
Features:
- Self stripping
- Moisture resistant seal
- Can be crimped using slip joint pliers
- Used with insulated copper conductors
Specifications:
- U-contact tin plated brass
- Green cap, white body
- Temperature 105°C
- Maximum voltage 30VAC
- Sealant mineral oil base EG-3 Grease
- Voltage rating 30VAC
- Not for use in direct ultraviolet exposure
Wire Range:
- 0.5mm² solid or stranded copper conductors with a maximum insulation 2.0mm
- Joins 2 or 3 unstripped conductors up to 0.5mm²
- Do not strip wires