Here at Allabout Pumps & Pipes we have fertiliser injectors to suit your situation when it comes to your projects. Our range can vary at times, so if you don’t see what you need, or require advice on a product, just contact us. One of our friendly team will be more than happy to help you.
We only utilise the best suppliers so we can pass on these quality products to our customers. So, if you need fertiliser injectors then we have a great selection for you along with sound advice on how to utilise it. We have Dosatron, Mazzei to Venturi in-store.
As a business we believe there are strong reasons to buy products from us. Our extensive range offers quality, excellent reliability, durability and efficiency. In turn, this results in lower operating costs and absolute peace of mind for our customers which is our core focus.
Please be advised that this is not a shopping site. If you need help with any project big or small, or are looking to find a product, just contact us. Our friendly staff at Allabout Pumps & Pipes will be able to assist with any information that you need on fertiliser injectors and more.
Application
Used to inject soluble or liquid fertiliser in greenhouse, open field and landsacpe watering systems.
Features
- Can be installed directly on main line (Check user guide)
- Dose of concentrate always proportional to volume of water entering dispenser
- No power needed
- Uses hydraulics from irrigation system
- No waste water
Specifications
- Body – Delrin
- Dosing stem – Polypropylene and polyethylene
- Piston – Polyurethane, nylon, nitrile, delrin
- Built in protection filter 32 mesh stainless steel
- Maximum operating temperature 40ºC
- Maximum head loss 70kPa at max flow rate
- Maximum suction height 4 metres
- Practical operating flow 5000-8000LPH through injector
- Operating pressure 150-800kPa
- Maximum injected solution at 500L/H – 10L
- Maximum injected solution at 8000L/H – 160L
- Adjustable dosage 0.2% to 2%
- Inlet/outlet 50mm metric poly
Application
Used to inject to inject soluble or liquid fertiliser in greenhouse, open field and landscape watering systems.
Features
- Can be installed directly on main line (check user guide)
- Dose of concentrate always proportional to volume of water entering dispenser
- No power needed
- Uses hydraulics from irrigation system
- No waste water
Specifications
- Body – Delrin
- Dosing stem – Polypropylene and polythylene
- Piston – polyurethane, nylon, nitrile, delrin
- Built in protection filter 32 mesh stainless steel
- Maximum operting temperature 40ºC
- Maximum head loss 70kPa at max flow rate
- Maximum suction height 4 metres
- Practical operating flow 5000-8000Lph through injector
- Operating pressure 150-800kPa
- Maximum injected solution at 500L/h – 25L
- Maximum injected solution at 8000L/h – 400L
- Adjustable dosage 1% to 5%
- Inlet/outlet 50mm metric poly
Application
Used to inject to inject soluble or liquid fertiliser in greenhouse, open field and landscape watering systems.
Features
- Can be installed directly on main line (check user guide)
- Dose of concentrate always proportional to volume of water entering dispenser
- No power needed
- Uses hydraulics from irrigation system
- No waste water
Specifications
- Body – Delrin
- Dosing stem – Polypropylene and polythylene
- Piston – polyurethane, nylon, nitrile, delrin
- Built in protection filter 50 mesh stainless steel
- Maximum operting temperature 40ºC
- Maximum head loss 140kPa at max flow rate
- Maximum suction height 4 metres
- Practical operating flow 10L/hr – 2500L/hr through injector
- Operating pressure 30 – 600kPa
- Maximum injected solution at 10Lph – 0.5L/h
- Maximum injected solution at 2500Lph – 125L/h
- Adjustable dosage 1% to 5%
Application
Used to inject soluble or liquid fertiliser in greenhouse, open field and landsacpe watering systems.
Features
- Can be installed directly on main line (Check user guide)
- Dose of concentrate always proportional to volume of water entering dispenser
- No power needed
- Uses hydraulics from irrigation system
- No waste water
- Low pressure flow operstion
Specifications
- Body – Delrin
- Dosing stem – Polypropylene and polyethylene
- Piston – Polyurethane, nylon, nitrile, delrin
- Built in protection filter 50 mesh
- Maximum operating temperature 40°C
- Maximum head loss 140kPa at max flow rate
- Maximum suction height 4 metres
- Practical operating flow 10L/Hr-2500L/Hr through injector
- Operating pressure 30-600kPa
- Maximum injected solution at 10L/hr 0.02L/Hr
- Maximum injected solution at 2500L/hr 40L/Hr
- Adjustable dosage 0.2% to 1.6%
- Inlet/outlet 20mm BSP male
Application
Used to inject liquid chlorine in greenhouse, open field and landscape watering systems.
Features
- Can be installed directly on main line (check user guide)
- Dose of concentrate always proportional to volume of water entering dispenser
- No power needed
- Uses hydraulics from irrigation system
- No waste water
Specifications
- Body – poly acetal
- Dosing stem – Polypropylene and polythylene
- Piston – polyanide, nitrile, polyacetate, polypropylene
- Seals – motor viton, dosage seal viton
- Inlet/outlet 32mm BSP male
- Built in protection filter 50 mesh stainless steel
- Maximum operting temperature 40ºC
- Maximum head loss 140kPa at max flow rate
- Maximum suction height 4 metres
- Practical operating flow 10L/hr – 2500L/hr through injector
- Operating pressure 50 – 500kPa
- Maximum injected solution at 100Lph – 1.5L/h
- Maximum injected solution at 4500Lph – 67L/h
- Adjustable dosage 0.2% to 1.5%
Description
Mazzei Injectors (patented) are extremely efficient, compact differential injection devices. Currently operating successfully in thousands of installations worldwide, Mazzei Injectors offer a reliable, accurate, and economical method to inject virtually any liquid or gas substance into a pressurised fluid stream.
Application
The highly versatile Mazzei Injectors are suitable for a wide variety of applications.
Agriculture
- Ag Irrigation Systems – to inject fertilisers and other chemicals or water treatment additives.
- Ag Spray Systems – for mixing and/or the transfer of concentrated pesticide materials.
- Food Processing – for water chlorination, injection of detergents, bacterial agents, other water treatment purification additives.
Home and Garden
- Irrigation Systems – for application of liquid fertiliser through landscape sprinkler or drip irrigation systems, hose end sprinklers and/or spray nozzles. (Check Local codes)
Industrial/Commercial
- Water Treatment – to inject air, liquids, gases (ozone), and other water purification chemicals for cooling tower or other water or fluid recirculatory systems, waste water systems, potable water systems.
- Washing & Cleaning – to inject detergents, solvents, and other cleaning agents into carpet cleaning equipment, car wash systems, dishwashing equipment and other industrial cleaning processes.
Features
- Molded from high quality thermoplastics with superior strength, high temperature capability, resistant to most chemicals.
- No moving parts, low-maintenance trouble-free operation.
- Unique design allows maximumcavitation in the injection chamber, thereby providing instantaneous mixing
- Ideally suited for continuous mixing functions, require no secondary blending devices.
- Initial cost and installation cost are low
- Powered by the motive fluid, no external energy required for most instllations.
- Available in a broad range of sizes, flows and injection capacities.
Application
Used to inject soluble or liquid fertiliser in greenhouse, open field and landscape watering systems. (Check local codes for backflow prevention laws.)
Features
- Kit includes:
- Venturi.
- Built in sight glass flow indicator.
- Control valve to throttle amount of fertiliser.
- 1m of suction tube
- Screen
Specifications
- Body – Polypropylene for resistance to acids and other chemicals.
- Maximum working pressure 785kPa
- Minimum working pressure on pressurized systems must be 98kPa.
- When using on by pass pressure differential between the inlet and outlet must be at least 70kPa.
- Venturi should always be installed on level plain.