Orange Pumps have been around for a few years and are a reliable and durable range of pumps available to our business.
When it comes to Orange Pumps, our team believes in quality, durability and reliability and these are qualities that we seek when sourcing the best products. Taking this into consideration, we all know, Australia has some of the harshest weather conditions. So, in order to make it easier on our customers, we as a team like to seek a good range of pumps on behalf of our customers.
As a business, customer satisfaction is our main focus when it comes to any product in our range. Please be aware, that this is not a shopping site, but it is a site where we have information on Orange Pumps. If you need help with any project big or small, or are looking to find a product, just contact us. Our great team are very knowledgeable when it comes to the Orange brand product range.
So, if you would like to check out the Orange Pumps range, have a browse in the catalogue below. If you prefer to check out our other suppliers and more of our range of pumps just click here.
The Orange Pumps UP300 petrol engine drive utility pump has been developed to combine high pressure, high volume and excellent self priming. The pump was developed in Melbourne over many years by an experienced team of engineers for fighting fires and other water transfer applications. Engine: Orange 100cc
Orange Pumps has developed a unique range of engine driven pumps for fighting fires and other water transfer applications by combining high pressure, high volume and excellent self priming. The Utility Pump has been developed in Melbourne over many years by an experienced team of engineers.
Integral to the design of the pump is the torque tuned impeller which maximises the engines horse power enabling more pressure to be delivered with every increase in revolution of the shaft. The UP range is unique in the market by delivering up to 120 metres of pressure from a single impeller.
Pressure is only really useful when it is delivering volume and the UP range can do both. The wide vanes on the impeller can allow large volumes of water to pass through. The UP range can produce up to 550 litres per minute or around 250 litres per minute at an operating pressure of 60 metres.
Self priming quickly is critical for fire fighting applications. The UP range of pumps use a single impeller which out performs twin impeller units when priming. The UP range can prime in under 1 minute with a 3½ metre vertical lift, which is five times quicker than the industry average and even higher for twin impeller pumps.
The impeller is constructed from a single piece of cast aluminium which is far stronger and more reliable than impellers that are glued, bolted or riveted together. Each impeller has been balanced and tested to reduce wear and tear on the engine bearings caused by shaft movement from non-concentric forces. The impeller features a self clearing, wide vane for small solids handling.
The Utility Pump can be used in Deep Well applications by connecting the smaller pressure pipe going down the bore to one of the discharge ports on the flange. A DC79-20 or DC54-20 deep well kit is recommended depending on the depth.
UP Range Features:
Recognized Engine Manufacturer
Torque tuned Impeller
Impeller balanced and tested
Single cast wide vane Impeller
Impeller clearing vanes
Dual threads
Built in check valve
Single cast Diffuser
Deep Well Kit DC79-20 or DC54-20
UP Range Benefits:
Strength and reliability
Proven engine reliability
High volume and high pressure
Twin impeller pressures from a single impeller
Easy to prime
Quick suction performance
Longer engine bearing life
Small solids handling
Choice of pipe threads
UP Range Specifications:
Orange 100cc
Inlet – 50mm (M) or 40mm (F)
Outlets – 25mm (M) x 2 & 50mm (M) or 40mm (F)
Priming – 25mm (M)
M: Male thread F: Female thread
The Orange Pumps UP500 petrol engine drive utility pump has been developed to combine high pressure, high volume and excellent self priming. The pump was developed in Melbourne over many years by an experienced team of engineers for fighting fires and other water transfer applications.
Engine: Honda GP160
Self priming quickly is critical for fire fighting applications. The UP range of pumps use a single impeller which out performs twin impeller units when priming. The UP range can prime in under 1 minute with a 3½ metre vertical lift, which is five times quicker than the industry average and even higher for twin impeller pumps.
The impeller is constructed from a single piece of cast aluminium which is far stronger and more reliable than impellers that are glued, bolted or riveted together. Each impeller has been balanced and tested to reduce wear and tear on the engine bearings caused by shaft movement from non-concentric forces. The impeller features a self clearing, wide vane for small solids handling.
The Utility Pump can be used in Deep Well applications by connecting the smaller pressure pipe going down the bore to one of the discharge ports on the flange. A DC79-20 or DC54-20 deep well kit is recommended depending on the depth.
UP Range Features:
Recognized Engine Manufacturer
Torque tuned Impeller
Impeller balanced and tested
Single cast wide vane Impeller
Impeller clearing vanes
Dual threads
Built in check valve
Single cast Diffuser
Deep Well Kit DC79-20 or DC54-20
UP Range Benefits:
Strength and reliability
Proven engine reliability
High volume and high pressure
Twin impeller pressures from a single impeller
Easy to prime
Quick suction performance
Longer engine bearing life
Small solids handling
Choice of pipe threads
UP Range Specifications:
Honda GP160
Inlet – 50mm (M) or 40mm (F)
Outlets – 25mm (M) x 2 & 50mm (M) or 40mm (F)
Priming – 25mm (M)
M: Male thread F: Female thread
The Orange Pumps UP600 petrol engine drive utility pump has been developed to combine high pressure, high volume and excellent self priming. The pump was developed in Melbourne over many years by an experienced team of engineers for fighting fires and other water transfer applications.
Engine: Subaru EX17 6.0hp
Self priming quickly is critical for fire fighting applications. The UP range of pumps use a single impeller which out performs twin impeller units when priming. The UP range can prime in under 1 minute with a 3½ metre vertical lift, which is five times quicker than the industry average and even higher for twin impeller pumps.
The impeller is constructed from a single piece of cast aluminium which is far stronger and more reliable than impellers that are glued, bolted or riveted together. Each impeller has been balanced and tested to reduce wear and tear on the engine bearings caused by shaft movement from non-concentric forces. The impeller features a self clearing, wide vane for small solids handling.
The Utility Pump can be used in Deep Well applications by connecting the smaller pressure pipe going down the bore to one of the discharge ports on the flange. A DC79-20 or DC54-20 deep well kit is recommended depending on the depth.
UP Range Features:
Recognized Engine Manufacturer
Torque tuned Impeller
Impeller balanced and tested
Single cast wide vane Impeller
Impeller clearing vanes
Dual threads
Built in check valve
Single cast Diffuser
Deep Well Kit DC79-20 or DC54-20
UP Range Benefits:
Strength and reliability
Proven engine reliability
High volume and high pressure
Twin impeller pressures from a single impeller
Easy to prime
Quick suction performance
Longer engine bearing life
Small solids handling
Choice of pipe threads
UP Range Specifications:
Subaru EX17 6.0hp
Inlet – 50mm (M) or 40mm (F)
Outlets – 25mm (M) x 2 & 50mm (M) or 40mm (F)
Priming – 25mm (M)
M: Male thread F: Female thread
The Orange Pumps UP650H petrol engine drive utility pump has been developed to combine high pressure, high volume and excellent self priming. The pump was developed in Melbourne over many years by an experienced team of engineers for fighting fires and other water transfer applications.
Engine: Honda GX200 6.5hp
Self priming quickly is critical for fire fighting applications. The UP range of pumps use a single impeller which out performs twin impeller units when priming. The UP range can prime in under 1 minute with a 3½ metre vertical lift, which is five times quicker than the industry average and even higher for twin impeller pumps.
The impeller is constructed from a single piece of cast aluminium which is far stronger and more reliable than impellers that are glued, bolted or riveted together. Each impeller has been balanced and tested to reduce wear and tear on the engine bearings caused by shaft movement from non-concentric forces. The impeller features a self clearing, wide vane for small solids handling.
The Utility Pump can be used in Deep Well applications by connecting the smaller pressure pipe going down the bore to one of the discharge ports on the flange. A DC79-20 or DC54-20 deep well kit is recommended depending on the depth.
UP Range Features:
Recognized Engine Manufacturer
Torque tuned Impeller
Impeller balanced and tested
Single cast wide vane Impeller
Impeller clearing vanes
Dual threads
Built in check valve
Single cast Diffuser
Deep Well Kit DC79-20 or DC54-20
UP Range Benefits:
Strength and reliability
Proven engine reliability
High volume and high pressure
Twin impeller pressures from a single impeller
Easy to prime
Quick suction performance
Longer engine bearing life
Small solids handling
Choice of pipe threads
UP Range Specifications:
Honda GX200 6.5hp
Inlet – 50mm (M) or 40mm (F)
Outlets – 25mm (M) x 2 & 50mm (M) or 40mm (F)
Priming – 25mm (M)
M: Male thread F: Female thread
The Orange Pumps UPT650 Honda petrol engine drive utility pump has been developed to combine high pressure, high volume and excellent self priming. The pump was developed in Melbourne over many years by an experienced team of engineers for fighting fires and other water transfer applications.
Engine: Honda GX200 6.5hp
Self priming quickly is critical for fire fighting applications. The UP range of pumps use a single impeller which out performs twin impeller units when priming. The UP range can prime in under 1 minute with a 3½ metre vertical lift, which is five times quicker than the industry average and even higher for twin impeller pumps.
The impeller is constructed from a single piece of cast aluminium which is far stronger and more reliable than impellers that are glued, bolted or riveted together. Each impeller has been balanced and tested to reduce wear and tear on the engine bearings caused by shaft movement from non-concentric forces. The impeller features a self clearing, wide vane for small solids handling.
The Utility Pump can be used in Deep Well applications by connecting the smaller pressure pipe going down the bore to one of the discharge ports on the flange. A DC79-20 or DC54-20 deep well kit is recommended depending on the depth.
UP Range Features:
Recognized Engine Manufacturer
Torque tuned Impeller
Impeller balanced and tested
Single cast wide vane Impeller
Impeller clearing vanes
Dual threads
Built in check valve
Single cast Diffuser
Deep Well Kit DC79-20 or DC54-20
UP Range Benefits:
Strength and reliability
Proven engine reliability
High volume and high pressure
Twin impeller pressures from a single impeller
Easy to prime
Quick suction performance
Longer engine bearing life
Small solids handling
Choice of pipe threads
UP Range Specifications:
Subaru EX17 6.0hp
Inlet – 50mm (M) or 40mm (F)
Outlets – 25mm (M) x 2 & 50mm (M) or 40mm (F)
Priming – 25mm (M)
M: Male thread F: Female thread
Orange has an excellent range of Submersible Pumps for cellars, drains, storm water, sumps, water features, rain harvesting, sewage, dairies, grey water and other applications. Pump design varies to suit a range of applications.
Features:
Vortex action creates whirlpool to pump solids
Dual carbon ceramic seals in oil bath
Additional lip seal protection
6 metre rubber electrical cable
Automatic float switch option
Stainless Steel shaft
Inbuilt motor thermal
Liquid temperature at 45ºC (60ºC intermittent)
Applications:
A – Storm water draining, cellars, sumps, water feature or rain harvesting.
B – Grey water, sullage, hair or silt in 90% water.
Technical Details:
Watts – 180 Watts
Solids – 18mm
Outlet – 32mm
Switch – Vertical Float
SP100V – Solids Handling – Vortex Sump Pump
Features:
Vortex action creates whirlpool to pump solids
Dual carbon ceramic seals in oil bath
Additional lip seal protection
6 metre rubber electrical cable
Automatic fl oat switch option
Stainless Steel shaft
Inbuilt motor thermal
Liquid temperature at 45ºC (60ºC intermittent)
Applications:
A – Storm water draining, cellars, sumps, water feature or rain harvesting.
B – Grey water, sullage, hair or silt in 90% water.
Technical Details:
Watts – 180 Watts
Solids – 18mm
Outlet – 32mm
Switch – Vertical Float
Orange has an excellent range of Submersible Pumps for cellars, drains, storm water, sumps, water features, rain harvesting, sewage, dairies, grey water and other applications. Pump design varies to suit a range of applications.
SP140 – Solids Handling – Vortex Sump Pump
Features:
Vortex action creates whirlpool to pump solids
Dual carbon ceramic seals in oil bath
Additional lip seal protection
6 metre rubber electrical cable
Automatic fl oat switch option
Stainless Steel shaft
Inbuilt motor thermal
Liquid temperature at 45ºC (60ºC intermittent)
Applications:
A – Storm water draining, cellars, sumps, water feature or rain harvesting.
B – Grey water, sullage, hair or silt in 90% water.
Technical Details:
Watts – 450 Watts
Solids – 25mm
Outlet – 50mm
Switch – Automatic
SP500 – High Volume – Shrouded Impellers
Features:
Robust cast iron construction
Dual silicon nitride seals in oil bath
Additional lip seal protection
6 metre rubber electrical cable
Automatic float switch option
Inbuilt motor thermal
Stainless Steel shaft
Liquid temperature at 45ºC (60ºC intermittent)
Applications:
A – Storm water draining, cellars, sumps, water feature or rain harvesting
B – Grey water, sullage, hair or silt in 90% water
Technical Details:
Watts – 750 Watts
Solids – 25mm
Outlet – 50mm
Switch – Automatic