Applications

• General water transfer and borehole applications.
• Particularly suited to low volume high pressure work.
• Stock watering, homestead and domestic water supplies.

Features

• Positive displacement pumps for outputs to 2.2 litres per second.
• Australian designed and manufactured
• Simplicity of design and reliable operation.
• Wide operating speed range for variable output.

Capacity

• 0.5 Litres per second against discharge head of up to 12m, and with a suction lift not exceeding 7.5m.

Specification

• Suction – screwed 25NB (1″ BSP) female.
• Discharge – scrwed 20NB (3/4″ BSP) female.
• Body – Cast Iron

ISO Pro Centrifugal

Applications

• Designed for heavy duty industrial use, including belt drive applications.
• General water transfer in processing plants, mines, construction sites and irrigation.

Features

• Heavy duty oil lubricated taper roller bearings.
• Australian designed and manufactured
• Superior hydraulic design & manufacturing methods produce significantly higher efficiencies for lower running costs and reduced maintenance.
• Wide range of options available
• Australia wide backup
• ISO 9001 quality assured
• Heads to 160 metres
• Up to 250 litres per second discharge

Australian Made to ISO 2858 Standard

Applications

Designed for efficient and reliable general purpose water transfer in industry, building services and irrigation.

Features

• Superior hydraulic design & manufacturing methods produce significantly higher efficiencies for lower running costs and reduced maintenance.
• Australian designed and manufactured.
• Up to 250 litres per second discharge
• World-wide service and backup.
• ISO 9001 quality assured.
• 32 to 200mm discharge.
• Wide range of options.
• Heads to 160 metres.

Southern Cross Turbine Pumps suit boreholes of 152mm (6 inch) casing or larger and have capacities of 4 to 63 litres per second (3,000 to 50,000 gallons per hour).

Features

• Non-corrosive pump is of all gunmetal construction with stainless steel drive shaft and couplings.
• For installations where conditions will allow, cast iron pumps can be supplied giving less expensive units.
• Enclosed impellers are less subject to wear, allow easier adjustments when installing, and do not need continual adjustment to maximum efficiency.
• Water lubricated neoprene rubber bearings for drive shaft in every stage of pump, and every 1.5m of column pipe.
• Water lubricated bearings and highly polished stainless steel shaft result in very low power loss due to friction.
• Non-reserve ratchet in driving heads prevents the pump from turning backwards and causing damage.
• Packing gland in discharge head easily accessible for occasional servicing.
• Interchangeability of spare parts assured by high manufacturing standards.

Applications

• Domestic Water Boosters
• Sprinklers / Firefighting
• Water Treatment Plants
• Seawater Pumping
• Chemical / Processing
• Food Processing
• Irrigation

Features

• Heavy duty, high quality, all wetted parts grade 304 stainless steel
• High efficiency, long working life and low maintenance
• Standard TEFC motor to IP55
• Low noise operation
• Vertical design saves floor space
• Mechanical seal to DIN24960.

• Inbuilt Jet and Multistage “Multiflow”
  • Model SPNS045ST, 25mm F inlet and outlet, 0.50 kW (In-Built Jet – shallow well self-priming)
  • Model SPNS055ST, 25mm F inlet and outlet, 0.50 kW (3 Stage)
  • Model SPNS075ST, 25mm F inlet and outlet, 0.60 kW (4 Stage)
  • Model SPNS095ST, 25mm F inlet and outlet, 0.60 kW (3 Stage)
  • Stainless steel pump housing
• Single Impeller “Multiflow”
  • Model SPN090S, 25mm F inlet and outlet, 0.75 kW
  • Model SPN120S, 32mm F inlet, 25mm F outlet, 1.10 kW
• Twin Impeller “Multiflow”
  • Model SPN090S, 32mm F inlet, 25mm F outlet, 1.10 kW
  • Model SPN160S, 40mm F inlet, 25mm F outlet, 1.50 kW
  • Model SPN180T, 40mm F inlet, 25mm F outlet, 2.20 kW (415 Volts – All 415V units must be wired with correctly rated thermal overload by a licensed electrical contractor).

Quick Selection Table

Applications

• General water transfer and borehole applications.
• Particularly suited to low volume high pressure work.
• Stock watering, homestead and domestic water supplies.

Features

• Positive displacement pumps for outputs to 2.2 litres per second.
• Australian designed and manufactured
• Simplicity of design and reliable operation.
• Wide operating speed range for variable output.

Applications

• Positive displacement helical rotor type pumps for the transfer of a variety of liquids including:
  • Water
  • Soft Macerated Sewerage
  • Soft Abattoir Effluent
  • Animal and Vegetable Oils
  • Piggery Effluent
  • Slurries

Features

• Pump to high heads or over long distances
• High efficiency, low maintenance.
• Constant non-pulsating discharge in either direction
• Low power and running costs
• Wide operating speed range for variable output
• Australian designed and manufactured.
• Up to 19 litres per second discharge
• Heads to 120 metres
• 40 to 100mm flanged connections

Applications

• Private and public water supply
• Sprinkler and drip Irrigation
• Booster pumping
• Fire fighting
• Fountains and water features
• Industrial Appications
• Rural Supplies.

Features

• Heavy duty, high quality construction, cold pressed 304 stainless
• Heavy duty top bearing (NBR + 304 stainless steel) with an
• intermediate bearing at each stage.
• Robust shaft and shaft coupling
• Rugged cable guard
• Discharge chamber with inbuilt reliable check valve for low head loss.
• Resistant to corrosion and abrasion
• Simple maintenance with easy dismantling and assembly
• Easy to replace natural rubber wear rings and bearings
• Optimized hydraulic profiles for high operating efficiencies.