Wilo Pumps

wilo pumps

Wilo Pumps have been around for a few years and are a reliable and durable range of pumps available to our business.

When it comes to Wilo Pumps, our team believes in quality, durability and reliability and these are qualities that we seek when sourcing the best products. Taking this into consideration, we all know, Australia has some of the harshest weather conditions. So, in order to make it easier on our customers, we as a team like to seek a good range of pumps on behalf of our customers.

As a business, customer satisfaction is our main focus when it comes to any product in our range. Please be aware, that this is not a shopping site, but it is a site where we have information on Wilo Pumps. If you need help with any project big or small, or are looking to find a product, just contact us. Our great team are very knowledgeable when it comes to the Wilo brand product range.

So, if you would like to check out the Wilo Pumps range, have a browse in the catalogue below. If you prefer to check out our other suppliers and more of our range of pumps just click here.

0 items in cart
or empty cart

Wilo-TWI 04 Single Phase & Three Phase

Wilo-TWI 04 Single Phase & Three Phase Image

 

 

 

 

 

 

 

 

 

 

4″ Stainless Steel Submersible Borehole Pump.

Your advantages
Long service life thanks to corrosion-resistant stainless steel, optionally available in V4A quality
ACS certified for drinking water applications
A high degree of flexibility thanks to versions in the 4, 6, 8 and 10-inch area
High range of performance from 1 to 250 m³/h

Construction
Multistage 4″ submersible pump in tie strap version for vertical or horizontal installation

Application
For water and drinking water supply from boreholes and rainwater storage
Process water supply
For municipal water supply, sprinkling and irrigation
Pressure boosting
Lowering of the water level
For pumping water in industrial applications
For pumping water without long-fibre and abrasive constituents

Equipment/function
Multistage submersible-motor pump with radial or semi-axial impellers
Integrated non-return valve
NEMA coupling
Single-phase or three-phase AC motor
Hermetically sealed motors

Scope of delivery
Hydraulics + motor completely assembled
1.5/2.5 m connection cable drinking water approval (cross-section: 4 x 1.5 mm2)
Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch
Installation and operating instructions

Technical data
Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
Submerged operating mode: S1
Fluid temperature: 3 – 30 °C
Minimum flow rate at motor: 0.1 m/s
Max. sand content: 50 g/m3
Max. number of starts: 20/h
Max. immersion depth: 150 m
Protection class: IP68
Pressure connection: Rp 1¼ – Rp 2

Materials
Hydraulics housing: Stainless steel 1.4301
Impellers: Stainless steel 1.4301
Hydraulic shaft: Stainless steel 1.4057
Motor housing: Stainless steel 1.4301
Motor shaft: Stainless steel 1.4305
Description/construction
Submersible pump with ACS approval for vertical or horizontal installation.

Hydraulics
Multistage submersible-motor pump with 4″ NEMA connection and radial or semi-axial impellers with sectional construction. Integrated non-return valve. All parts that come in contact with the fluid are made of corrosion-free materials.

Motor
Corrosion-free single-phase or three-phase motor for direct starting. Sealed and hermetically cast motor, resin-impregnated, with enamel-insulated winding, self-lubricating bearing, with water-glycol filling.

Cooling
The motor is cooled by the pumped fluid. The motor must always be immersed when operated. The limit values for maximum fluid temperature and minimum flow velocity must be adhered to. Vertical installation is possible with or without cooling jacket. Horizontal installation must be performed in conjunction with a cooling jacket.

Pressure shroud
The pressure shroud is used for the direct installation of the unit in the pipe system. Standard models are without mounted non-return valves. The maximum inlet pressure is 10 bar.

Product Inquiry Form

    Your Name (required)

    Your Email (required)

    Inquiry Product Name

    Your Message

    Wilo-TWI 04 Single Phase & Three Phase

    Wilo-TWI 04 Single Phase & Three Phase Image

     

     

     

     

     

     

     

     

     

     

    4″ Stainless Steel Submersible Borehole Pump.

    Your advantages
    Long service life thanks to corrosion-resistant stainless steel, optionally available in V4A quality
    ACS certified for drinking water applications
    A high degree of flexibility thanks to versions in the 4, 6, 8 and 10-inch area
    High range of performance from 1 to 250 m³/h

    Construction
    Multistage 4″ submersible pump in tie strap version for vertical or horizontal installation

    Application
    For water and drinking water supply from boreholes and rainwater storage
    Process water supply
    For municipal water supply, sprinkling and irrigation
    Pressure boosting
    Lowering of the water level
    For pumping water in industrial applications
    For pumping water without long-fibre and abrasive constituents

    Equipment/function
    Multistage submersible-motor pump with radial or semi-axial impellers
    Integrated non-return valve
    NEMA coupling
    Single-phase or three-phase AC motor
    Hermetically sealed motors

    Scope of delivery
    Hydraulics + motor completely assembled
    1.5/2.5 m connection cable drinking water approval (cross-section: 4 x 1.5 mm2)
    Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch
    Installation and operating instructions

    Technical data
    Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    Submerged operating mode: S1
    Fluid temperature: 3 – 30 °C
    Minimum flow rate at motor: 0.1 m/s
    Max. sand content: 50 g/m3
    Max. number of starts: 20/h
    Max. immersion depth: 150 m
    Protection class: IP68
    Pressure connection: Rp 1¼ – Rp 2

    Materials
    Hydraulics housing: Stainless steel 1.4301
    Impellers: Stainless steel 1.4301
    Hydraulic shaft: Stainless steel 1.4057
    Motor housing: Stainless steel 1.4301
    Motor shaft: Stainless steel 1.4305
    Description/construction
    Submersible pump with ACS approval for vertical or horizontal installation.

    Hydraulics
    Multistage submersible-motor pump with 4″ NEMA connection and radial or semi-axial impellers with sectional construction. Integrated non-return valve. All parts that come in contact with the fluid are made of corrosion-free materials.

    Motor
    Corrosion-free single-phase or three-phase motor for direct starting. Sealed and hermetically cast motor, resin-impregnated, with enamel-insulated winding, self-lubricating bearing, with water-glycol filling.

    Cooling
    The motor is cooled by the pumped fluid. The motor must always be immersed when operated. The limit values for maximum fluid temperature and minimum flow velocity must be adhered to. Vertical installation is possible with or without cooling jacket. Horizontal installation must be performed in conjunction with a cooling jacket.

    Pressure shroud
    The pressure shroud is used for the direct installation of the unit in the pipe system. Standard models are without mounted non-return valves. The maximum inlet pressure is 10 bar.

    Call Now ButtonCall Us