We have an extensive range of fittings that we offer our customers. Our range can vary at times, so if you don’t see what you need, or require advice on a product, just contact us. One of our friendly team will be more than happy to help you. We only utilise the best suppliers so we can pass on these quality products to our customers. From PVC Fittings & Poly Fittings, Tapping Bands to Flanges, compression fittings to hose clamps, we have what you need.
As a business we believe there are strong reasons to buy products from us. Our extensive range of quality fittings offer excellent reliability and efficiency. In turn, this results in lower operating costs and peace of mind.
When it comes to our systems they use leading technology and are sold by a committed team of sales staff. We find that people who use our systems benefit from the combination of experienced staff and support from a skilled supplier network.
Please be advised that this is not a shopping site. If you need help with any project big or small, or are looking to find a product, just contact us. Our team at Allabout Pumps & Pipes will be able to assist with sizing, measurements, tapping bands, hose clamps, pvc fittings & poly fittings advice and much more.
Application
Complete range of compression fittings allows assembly on metric polyethylene pipes. Disassembly not required for all sizes. All components work together smoothly to guarantee a reliable and efficient joint.
Specifications
- Body, Nut, thrust ring: virgin polypropylene in master batches, UV stabilized.
- Clamp ring: Acetalic resin
- Gaskets: Food safe rubber (NBR)
- Reinforcement ring: stainless steel AISI 430
- Colour Body: Black
- Colour Nut: Blue (150year life)
- Taper male thread (pressure tight)
- Parallel female thread (pressure tight)
- Maximum pressure:
- -20oC +20oC 15 – 63mm 1600kPa
- -20oC +20oC 75 – 110mm 1000kPa
- Certificates: Australia (AS 4129)
Selection of 18 types from 15mm to 110mm
Application
Connecting metric poly pipe to flanged face pipework.
Specifications
- Body, Nut, thrust ring: virgin polypropylene in master batches.
- Clamp ring: Acetalic resin
- Gaskets: Food safe rubber (NBR)
- Reinforcement ring stainless steel AISI 430
- ColourBody:
- Black
- Nut: Blue
- Flange table D
- Temperature:
- -20oC – +20oC 50 – 63mm 1600kPa
- -20oC – +20oC 75 – 110mm 1000kPa
- Australian Standard AS 4129
Application
Pressure metric poly pipe networks carrying water. Sizing from 25mm through 315mm
Specifications
- Body – Virgin polypropylene, UV stabilised
- Caskets – NBR (Food safe rubber)
- Reinforcement rings – stainless steel
- Bolts & Nuts – Galvanised (Optional stainless steel)
- All pressure pipe type PE to AS/NZ 4130
- Test standards AS/NZ 4129
- Thread standards AS 1722
Application
Transition fitting from metal to plastic for all water pipe networks.
Specifications
- Operating pressure PN16 (1600kPa)
- Male/female threads are made of nickled brass and manufactured to gas thread standard.
- Metal inserts have nut for tightening
- Suitable for use with potable water
- Body nut and thrust ring made from virgin polypropylene UV stabilised
- Clamp ring – acetalic resin
- Body colour black
- Australian standard AS 4129
- Metal threads – conical
- Female threads – cylindrical
- Certificates: Australia (Rural AS 2698-2)
Selection of 12 types from ¾” to 2″
Rural to Metric Fitting Conversion Kits available.
Application
Transition fitting from metal to plastic for all water pipe networks.
Specifications
- Operating pressure PN16 (1600kPa)Male/female threads are made of nickled brass and manufactured to gas thread standard.
- Metal inserts have nut for tightening
- Suitable for use with potable water
- Body nut and thrust ring made from virgin polypropylene UV stabilised
- Clamp ring – acetalic resin
- Body colour black
- Australian standard AS 4129
- Metal threads – conical
- Female threads – cylindrical
Application
Repair coupling used in PVC Pipe Networks carrying water.
Specifications
- Material – PVC Type 1, Grade 1, Cell Class 12545-B
- BYNA-N Seals – Double Width
- ACME Thread cap to body
- Maximum pressure – 1378kPa
* Do not use on gas, oil and compressed air.
Application
Used in PVC Pipe networks carrying water.
Specifications
- PVC Type 1, Grade 1, Cell Class 12545-B
- EDPM – ‘O’ Ring Seal
- Pressure control ring – PVC
- Stainless Steel grip ring
- ACME Thread cap to body
- Maximum pressure – 1102kPa
- Stainless Steel collar
* Do not use on gas, oil and compressed air.
Application
Used to allow the addition of a tee branch in PVC Pipe Network carrying water.
Specifications
- Material – PVC Type 1, Grade 1, Cell Class 12545-B
- BYNA-N Seals – Double Width
- ACME Thread cap to body
- Maximum pressure – 1378kPa
- 15mm to 50mm sizing
* Do not use on gas, oil and compressed air.
Application
Excellent for use in repairing broken lines or adding additional lines. Simply cut section of broken pipe slightly longer than compressed Flo Span, apply glue to fitting and expand Flo Span to fill the gap.
Specifications
- Double ‘O’ Ring design on expansion (EDPM)
- ACME Thread cap to body
- 1378kPa rated in all positions
- EDPM ‘O’ Ring on union end
- Body: PVC Type 1, Grade 1 material
- 15mm to 100mm sizing
* Do not use on gas, oil and compressed air.
Application
Complete range of threaded fittings used on all irrigation pipe work systems.
Specifications
- No corrosion risk
- UV Stable
- Working pressure to 1600kPa
- BSP and BSPT Threads
- Sizes 15-50mm
- Nipples & sockets
- Bushes, female tees and elbows.
- Male elbows, hex plugs
- Hose tails, backnuts and caps
- Tank male inlets, tank fittings
- Materials of construction: nylon and polypropylene
Application
Complete range of PVC fittings used in all irrigation watering systems and fresh water piping networks.
Specifications
- Australian Standard AS 1477 CL18
- Material : 100% virgin
- Polyvinyl Chloride (PVC) 83.3% no less
- Titanium Dioxide (TiO2) 1.5 parts per hundred mass
- Vinyl Chloride Monomer content: 1mg/kg less than
Typical Properties:
| Specific Gravity | ASTM D-792 | 1.44 g/cm² |
| Izod Impact Strength | ASTM D-256 | 7kgf/cm |
| Tensile Strength | ASTM D-638 | 490 kgf/cm² |
| Elongation @ Break | ASTM D-638 | 115% |
| Heat Stability @ 190°C | BS 2782 | 50min |
| Vicat Softening Point | ASTM D-152s | 91°C |
Selection of 13 Categories
See HR Products Price list for sizes and codes
Not for use with compressed air or gases
Description
Kwikcut is a Plastic Pipe and Hose Cutter designed to meet the needs of the professional.
Application
The rotating / rocking technique produces fast, easy cuts, together with being small and lightweight, saves hours of time and effort. It is ideally suited to a limited working space, the cutter adapts easily where a conventional hacksaw cannot be used. Kwikcut produces no cutting residue, eliminating deburring and the possibility of contaminating the pipe. This clean, smooth cut allows quick and easy connections for a neat, professional installation.
Features
- Replaceable high-carbon, Teflon coated steel blade.
- Blade closes into its own handle for safe carrying and handling.
- Tough, durable nylon handles.
- Tool pouch available.
Application
Designed for use in joining plastic piping systems where frequent disassembly may be required. Suitability of application is at the discretion of the user.
Features
- Single body
- PVC construction, heavy body
- Table D drilling
Specifications
- 50 – 150mm metric sizing
- Bolt hole pattern AS/NZS 1477
- Maximum pressure 1033kPa at 25º Celcius
Application
Excellent for use in repairing broken lines or adding additional lines. Simply cut section of broken pipe slightly longer than compressed Quick-Fix, apply glue to fittings and expand Quick-Fix to fill the gap.
Specification
- Available in 15-150mm sizes.
- Rugged Hi-Impact PVC Sch 40 Type II construction.
- 1033kPa rated in all positions.
- Internal self-lubricating EPDM oʼring for long life and smooth movement.
- One piece cylinder – no solvent welds to leak
Application
Rural tapping band designed to be fitted onto rural size poly pipe.
Description
- Poly rural pipe,
Ideal for use in narrow trenches, - Single bolt system for easy installation,
Cuts installation time in half.
Specifications
- Body – two halves hinged together on one side with a single bolt clamping the other side together. Made from engineering grade
- Acetal designed for long term performance.
- Bolts – zinc plated or stainless steel (option extra).
- Seal – resilient seat sealing “O”ring made from nitrile rubber.
- Maximum working pressure of 800Kpa.
Application
Complete range of Spears Brands Schedule 40 PVC fittings used in irrigation watering systems.
Features
- Smooth interior walls result in lower pressure loss and higher volume than metal fittings.
- Schedule 40 size range 15mm – 250mm Metric
| Properties |
ASTM Test Method |
PVC
|
| Mechanical Properties, 23°C | ||
| Specific Gravity, g/cm³ | D 792 |
1.41
|
| Tensile Strength, psi | D 792 |
7000
|
| Modulus of Elasticity, psi | D 792 | 440000 |
| Compressive Strength, psi | D 792 | 9000 |
| Flexural Strength, psi | D 792 | 13200 |
| Izod Impact, notched, ft-lp/in | D 792 | 0.65 |
| Thermal Properties | ||
| Heat Deflection Temperature, 0°C at 455kPa | D 792 | 165 |
| Thermal Conductivity, BTU/hr/sq ft/°F/in | D 792 | 1.2 |
| Coefficient of Linear Expansion, in/in/°F | D 792 | 3.0 x 10-5 |
| Flammability | ||
| Limiting Oxygen Index, % | D 792 | 43 |
| UL 94 Rating | 94V-0 | |
| Other Properties | ||
| Water Absorption, % 24 hr. | D 792 | 0.05 |
| Industry Standard Colour | White / Dark Grey | |
| ASTM Cell Classification | D 1784 | 12454 |
| NSF Potable Water Approved | Yes | |
Selection of 35 Categories
See HR Products Price list for sizes and codes
Not for use with compressed air or gases
Application
Designed for use for joining plastic piping systems, where frequent disassembly may be required. Suitability of application is at the discretion of the user.
Features
- Two piece design with rotating ring flange face
- Dual bolt hole pattern
- PVC construction
- No backing ring required
Specifications
- 80 – 250mm metric sizing
- Bolt hole pattern
- Suits BS10 Table D & E (Aust)
- Suits ANSI (USA)
- Suits DIN (Europe)
- PVC Cell classification 12454-B
- Maximum pressure 1033kPa at 22° Celcius
Applications
Pressure UPVC pipe networks carrying water.
Description
High pressure water tapping bands designed to replace metal fittings in buried irrigation pipe networks, noryl tapping bands provide the same resistance to physical abuse while guaranteeing a permanent resistance to corrosion.
Specifications
- Body – two bands bolted together to form a clamp around the pipe. Halves constructed NORYL GTX 820 resin (20% glass filled). Noryl is a blend of polystyrene and poly phenylene oxide which is noted for its rigidity, heat resistance, good electrical and chemical resistance with strong dimensional stability.
- Stainless steel nuts, bolts and washers (10mm)
- Seal – resilient seat sealing ring ‘E’ lip nitrile rubber.
- Pressure class PN16 (1600kpa)
Application
Used to allow simple manifolding of solenoid valves into irrigation manifolds. Assembles and dismantles easily for maintenance.
Specifications
- Body & gasket: Poly Propylene
- Gasket: EPDM
- Max working pressure: 1000 kPa
- Threads: BSP
Application
High Quality Poly Propylene fittings for irrigation.
Specifications
- Material: Poly Propylene
- Thread: BSP
- Max working pressure: 1600 kPa @ 20°C
- Max working temperature: 100°C
- ‘O’ ring seal NBR
- 15-50mm sizes available
- ‘O’ ring seal on male and female ends of fittings
- Tavlit Hex Nipples
- Tavlit Hex Nipples – Reducing
- Tavlit Hex Reducing Bushes – M/F
