Submersible Pumps along with stormwater systems, need to be hardworking, reliable and durable. In order for this to happen, when it comes to submersible pumps our team believes in getting it right.
Our team always take into consideration that Australia has some of the harshest weather conditions in the world. So, in order to make it easier on our customers, we as a team like to seek a good range of products on behalf of our customers. We look at the efficiency of our systems and also the cost factor.
As a business, customer satisfaction is our main focus when it comes to any product in our range. Please be aware, that this is not a shopping site, but it is a site where we have information on submersible pumps. If you need help with any project big or small, or are looking to find a product, just contact us. Our great team are very knowledgeable when it comes to our product range.
So, give us a call on 07-5531 5554 and we will find the right submersible pump for you. If you prefer to check out our other suppliers and more of our range of pumps, just click here.
Single channel, sewage handling submersible sump pumps with a cutting impeller, capable of pumping semi-screened or grey water of neutral pH. Primarily used for sewage water pumping, the Davey Cutter pumps can also be used for sump emptying, septic effluent disposal, water transfer, pumping light slurries and factory waste, or pumping wastewater with stringy or long soft solids in suspension.
Features
Corrosion resistant 304SS grade shaft, motor shell and fasteners mean a long service life, and an open impeller and single channel centrifugal design with a cutting leading edge means it is less susceptible to blockage and capable of higher heads and pressure. The ability to cut string like materials and pump soft solids in suspension reduces the risk of blockages in pipework or the pump itself.
A double mechanical shaft seal in oil bath with hard faced silicon carbide/ceramic seal on pump side/sand slinger lip seal provides added motor protection.
Davey recommends utilising slide rail kits with Cutter pumps, for easy removal and re-installation. There is a choice of either single or three phase motors. This product is not suitable for sanitary or flushable wipe products, please consider the Grinder models for this application.
Please refer to the documentation for all features and full technical specifications.
Application
The pumps are suitable for:
- Drainage
- Effluent
- Wastewater
- Process water
- Domestic sewage
Features & Benefits
The Grundfos DP, EF, SE and SEV submersible wastewater pump range features a variety of unique user benefits:
- Cable plug connection
- Unique clamp connection
- Single-channel and vortex impellers
- Solids passage upto 65mm
- Unique cartridge shaft seal
- Modular design
- Minimum downtime
Option
- Control and protection system
- Motor operation control
Technical Data
- Flow Q:max: 19.5l/s (70m3/h)
- Head H:max: 25m
- Liquid temp: 0oC to +40oC
- Discharge diameter : Rp2 to DN65
Application
The SP pumps are suitable for the following applications:
- Groundwater supply to waterworks
- Irrigation in horticulture and agriculture
- Groundwater lowering
- Pressure boosting
- Industrial applications
Features & Benefits
The Grundfos SP pump range features a variety of unique user benefits:
- High efficiency
- Long service life as all components are stainless steel
- Motor protection via CU3
- Optional – data can be monitored and controlled via CU2/R100
Technical Data
- Flow Q:max 470m3/h
- Head H:max 670m
- Liquid temp.: 0oC to +60oC
- Instal. Depth: max. 600m
Applications
The pumps are suitable for
- Domestic water supply systems
- Groundwater supply to waterworks
- Irrigation in horticulture and agriculture
- Groundwater lowering
- Industrial applications
Features & Benefits
- Integrated dry-running protection
- Soft start
- Over- and undervoltage protection
- High efficiency
Technical Data
- Flow (Q)
- max. 9 m³/h
- Head (H)
- max. 230 m
- Liquid temperature
- max. 35 °C
Single or Multichannel Impeller Pumps
Application
The pumps are suitable for the following applications
- Transfer of wastewater
- Transfer of raw water
- Pumping of sludge-containing water
- Pumping of industrial effluent
Features & Benefits
The Grundfos submersible wastewater pump range features a variety of unique user benefits:
- Wide range
- SmartTrim
- Operation with/without cooling jacket
- Submerged or dry installation
- Different types of impellers
- Built-in motor protection
Options
- Control and protection systems
- External cooling water
- External seal flush system
Technical Data
- Flow Q: max. 1000 m3/h
- Head, H: max. 90 m
- Liquid temp.: 0oC to +40oC
- Particle size: max. ø145 mm
- Grundfos CH – Domestic Water Supply pumps
Submersible pumps for solid-laden wastewater. Made in stainless steel, with mechanical seal and versions with twin-channel impeller, Vortex impeller, and grinder impeller. Supplied with or without float switch.
APPLICATIONS:
- Emptying of septic tanks and residential sumps
- Pumping of effluent (the VX version also pumps suspended filaments)
- Emptying of wells and tanks in industrial and ecological applications
- Emptying of tanks or reservoirs
- Emergency draining in flooded areas
SPECIFICATIONS:
Delivery: up to 40 m3/h
Head: up to 14.5 m
Power supply: three-phase and single-phase 50 and 60 Hz
Power: 0.55 kW to 1.5 kW
Maximum immersion depth: 5 m
Temperature of pumped liquid: 0°C to +35°C (with pump totally immersed)
Shaft extension: Stainless steel
Liquids with suspended solids:
– up to 35 mm (Domo 7-Domo 7VX)
– up to 50 mm (Domo 10-15-20 and Domo10-15-20VX)
Version with grinder impeller (DOMO GRI)
Insulation class: F (motor dry)
Protection: IP68
Length of cable: 10 m (except Domo 7,5 m)
MATERIALS:
Pump body, motor casing: Stainless steel
DOMO 7 (VX) impeller: Reinforced nylon
DOMO 10-15-20 (VX) impeller: Stainless steel
DOMO GRI impeller: Technopolymer PBT, stainless steel and high resistance Grinder.
Inner mechanical seal: Silicon-carbide/Silicon-carbide
Lubrificated by the DRIVELUB System
Upper lip seal: NBR
Shaft extension: Stainless steel
Handle: Nylon
MODELS: DOMO, DOMO VX, DOMO GRI
Submersible vertical electric pumps
Immersible vertical electric pumps for the industrial and commercial sectors.
Specifications:
Delivery: up to 120 m3/h
Head: up to 240 m
Power supply: three-phase and single-phase 50 and 60 Hz
Power: 0.30 kW to 22 kW
Maximum operating pressure: 25 bar
Temperature of pumped liquid: 10°C to +90°C
Application:
Pumping of coolants, lubricants and condensate
Machine tools, welders, engine test stands
Cooling systems
Washing systems
Irrigation – pontoon mount
Water supply / stock watering – pontoon mount
Materials:
Impeller, diffuser, shaft, outer sleeve: stainless steel
Mechanical seal: Ceramic/Carbon/FPM
Elastomers: FPM
Multi-stage centrifugal submersible pumps for clean water in 6” wells
Lowara multi-stage centrifugal submersible pumps for clean water in 6” wells. Made of AISI 304 or AISI 316 stainless steel.
These durable and lightweight pumps assure high-efficiency, low maintenance costs and ease of management. Their main characteristics include the possibility of replacing the impeller inlet wear ring. Available in the high-pressure version to guarantee heads of up to 700 metres. Can be coupled to all NEMA standard motors.
Specifications:
Delivery: up to 78 m3/h
Head: up to 700 metres (high-pressure version)
Power supply: three-phase 50 and 60 Hz
Three-phase version: 380-415 V
Power: 0.55 kW to 55 kW
Can be coupled with L4C, L6W and L8W three-phase asynchronous motors in a coolant bath.
Maximum overall diameter of pump (two cable covers included):
144 mm (standard version)
195 mm (high-pressure version)
Water temperature: 0°C to +60°C (depending on the limits of the associated motor)
Maximum permissible quantity of suspended sand: 100 g/m3
Applications:
- Water supply
- Pressure boosting
- Irrigation
- Fire-fighting
- Mining industry
- Golf
- Groundwater level control
Materials:
Delivery port, non-return valve, diffuser, impeller, cable cover, lower support, pump shaft, coupling, spacer, screws, tie-rods: Stainless steel
Thrust bearing: PTFE
Wear ring: Technopolymer PPO
Upper bearing: tungsten carbide
Shaft guide bearing: polyurethane
Elastomers: EPDM
Multi-stage submersible centrifugal electric pumps for clean water in 10-12” diameter wells and larger
Lowara submersible borehole pumps for 10″ & 12″ wells. Made in cast iron and 304SS. Impeller or entire pump available in bronze on request. Built-in non-return valve. The guide bearings and wear rings assure high resistance to wear and long-term constancy and reliability of hydraulic characteristics. Can be coupled to all NEMA-standard motors.
Specifications:
Delivery: up to 520 m3/h
Head: up to 345 metres
Power supply: three-phase 50 and 60 Hz
Power: 11 kW to 300 kW
Maximum immersion depth: 350 metres (depending on LW motor)
Temperature of water: 0°C to +60°C (depending on the configuration of the motor)
Maximum permissible quantity of suspended sand: 50 g/m3
Applications:
Water distribution in civil and industrial systems
Pressure boosting
Irrigation
Fire-fighting
Mining industry
Groundwater level control
Materials:
Delivery head/valve casing: Stainless steel
Diffuser: Stainless steel
Impeller: Stainless steel
Taperlock: Duplex stainless steel
Suction screen: Stainless steel
Pump shaft: Stainless steel
ZR version: available in DUPLEX
Orange has an excellent range of Submersible Pumps for cellars, drains, storm water, sumps, water features, rain harvesting, sewage, dairies, grey water and other applications. Pump design varies to suit a range of applications.
Features:
Vortex action creates whirlpool to pump solids
Dual carbon ceramic seals in oil bath
Additional lip seal protection
6 metre rubber electrical cable
Automatic float switch option
Stainless Steel shaft
Inbuilt motor thermal
Liquid temperature at 45ºC (60ºC intermittent)
Applications:
A – Storm water draining, cellars, sumps, water feature or rain harvesting.
B – Grey water, sullage, hair or silt in 90% water.
Technical Details:
Watts – 180 Watts
Solids – 18mm
Outlet – 32mm
Switch – Vertical Float
SP100V – Solids Handling – Vortex Sump Pump
Features:
Vortex action creates whirlpool to pump solids
Dual carbon ceramic seals in oil bath
Additional lip seal protection
6 metre rubber electrical cable
Automatic fl oat switch option
Stainless Steel shaft
Inbuilt motor thermal
Liquid temperature at 45ºC (60ºC intermittent)
Applications:
A – Storm water draining, cellars, sumps, water feature or rain harvesting.
B – Grey water, sullage, hair or silt in 90% water.
Technical Details:
Watts – 180 Watts
Solids – 18mm
Outlet – 32mm
Switch – Vertical Float
Orange has an excellent range of Submersible Pumps for cellars, drains, storm water, sumps, water features, rain harvesting, sewage, dairies, grey water and other applications. Pump design varies to suit a range of applications.
SP140 – Solids Handling – Vortex Sump Pump
Features:
Vortex action creates whirlpool to pump solids
Dual carbon ceramic seals in oil bath
Additional lip seal protection
6 metre rubber electrical cable
Automatic fl oat switch option
Stainless Steel shaft
Inbuilt motor thermal
Liquid temperature at 45ºC (60ºC intermittent)
Applications:
A – Storm water draining, cellars, sumps, water feature or rain harvesting.
B – Grey water, sullage, hair or silt in 90% water.
Technical Details:
Watts – 450 Watts
Solids – 25mm
Outlet – 50mm
Switch – Automatic
SP500 – High Volume – Shrouded Impellers
Features:
Robust cast iron construction
Dual silicon nitride seals in oil bath
Additional lip seal protection
6 metre rubber electrical cable
Automatic float switch option
Inbuilt motor thermal
Stainless Steel shaft
Liquid temperature at 45ºC (60ºC intermittent)
Applications:
A – Storm water draining, cellars, sumps, water feature or rain harvesting
B – Grey water, sullage, hair or silt in 90% water
Technical Details:
Watts – 750 Watts
Solids – 25mm
Outlet – 50mm
Switch – Automatic
SFSP-G200-03
Seaflo inline submersible and inline pump is easy to install and carry. Also, the pump is able to pump seawater. With long life and quiet perform motor, allows it to work in a quiet environment. The food grade material allows it to work with a wide range of applications.
FEATURES & BENEFITS
- Able to pump 80°C seawater
- Able to run about 20 minutes
- Portable to carry on
- Easy installation
- Intermittent duty
STANDARD PUMP CONFIGURATIONS
Flow Rate
200 GPH
Voltage
12v
Max Amps
4.5 A
Fuse Amps
7.5 A
Head
10m/32′
Wire Lead
1m/3′
Outlet Dia.
3/8″ / 1/2″
Applications
- Private and public water supply
- Sprinkler and drip Irrigation
- Booster pumping
- Fire fighting
- Fountains and water features
- Industrial Appications
- Rural Supplies.
Features
- Heavy duty, high quality construction, cold pressed 304 stainless
- Heavy duty top bearing (NBR + 304 stainless steel) with an
- intermediate bearing at each stage.
- Robust shaft and shaft coupling
- Rugged cable guard
- Discharge chamber with inbuilt reliable check valve for low head loss.
- Resistant to corrosion and abrasion
- Simple maintenance with easy dismantling and assembly
- Easy to replace natural rubber wear rings and bearings
- Optimized hydraulic profiles for high operating efficiencies.