Pressure Compensating
Toro Drip-Eze is made with a pressure compensated dripper so it is ideal for slopes and multi-levelled garden beds because it is designed for even flow.
Toro Drip-Eze applies water to the plants at a slow consistent rate, reducing the risk of run-off and water wastage. Suited to areas like median strip garden beds where overspray cannot be tolerated.
Pressure Compensating
Toro Drip-Eze is made with a pressure compensated dripper so it is ideal for slopes and multi-levelled garden beds because it is designed for even flow.
Toro Drip-Eze applies water to the plants at a slow consistent rate, reducing the risk of run-off and water wastage. Suited to areas like median strip garden beds where overspray cannot be tolerated.
Pressure Compensating
Toro Drip-Eze is made with a pressure compensated dripper so it is ideal for slopes and multi-levelled garden beds because it is designed for even flow.
Toro Drip-Eze applies water to the plants at a slow consistent rate, reducing the risk of run-off and water wastage. Suited to areas like median strip garden beds where overspray cannot be tolerated.
Multi-stage submersible centrifugal electric pumps for clean water in 10-12” diameter wells and larger
Lowara submersible borehole pumps for 10″ & 12″ wells. Made in cast iron and 304SS. Impeller or entire pump available in bronze on request. Built-in non-return valve. The guide bearings and wear rings assure high resistance to wear and long-term constancy and reliability of hydraulic characteristics. Can be coupled to all NEMA-standard motors.
Specifications:
Delivery: up to 520 m3/h
Head: up to 345 metres
Power supply: three-phase 50 and 60 Hz
Power: 11 kW to 300 kW
Maximum immersion depth: 350 metres (depending on LW motor)
Temperature of water: 0°C to +60°C (depending on the configuration of the motor)
Maximum permissible quantity of suspended sand: 50 g/m3
Applications:
Water distribution in civil and industrial systems
Pressure boosting
Irrigation
Fire-fighting
Mining industry
Groundwater level control
Materials:
Delivery head/valve casing: Stainless steel
Diffuser: Stainless steel
Impeller: Stainless steel
Taperlock: Duplex stainless steel
Suction screen: Stainless steel
Pump shaft: Stainless steel
ZR version: available in DUPLEX
Multi-stage submersible centrifugal electric pumps for clean water in 10-12” diameter wells and larger
Lowara submersible borehole pumps for 10″ & 12″ wells. Made in cast iron and 304SS. Impeller or entire pump available in bronze on request. Built-in non-return valve. The guide bearings and wear rings assure high resistance to wear and long-term constancy and reliability of hydraulic characteristics. Can be coupled to all NEMA-standard motors.
Specifications:
Delivery: up to 520 m3/h
Head: up to 345 metres
Power supply: three-phase 50 and 60 Hz
Power: 11 kW to 300 kW
Maximum immersion depth: 350 metres (depending on LW motor)
Temperature of water: 0°C to +60°C (depending on the configuration of the motor)
Maximum permissible quantity of suspended sand: 50 g/m3
Applications:
Water distribution in civil and industrial systems
Pressure boosting
Irrigation
Fire-fighting
Mining industry
Groundwater level control
Materials:
Delivery head/valve casing: Stainless steel
Diffuser: Stainless steel
Impeller: Stainless steel
Taperlock: Duplex stainless steel
Suction screen: Stainless steel
Pump shaft: Stainless steel
ZR version: available in DUPLEX
Multi-stage submersible centrifugal electric pumps for clean water in 10-12” diameter wells and larger
Lowara submersible borehole pumps for 10″ & 12″ wells. Made in cast iron and 304SS. Impeller or entire pump available in bronze on request. Built-in non-return valve. The guide bearings and wear rings assure high resistance to wear and long-term constancy and reliability of hydraulic characteristics. Can be coupled to all NEMA-standard motors.
Specifications:
Delivery: up to 520 m3/h
Head: up to 345 metres
Power supply: three-phase 50 and 60 Hz
Power: 11 kW to 300 kW
Maximum immersion depth: 350 metres (depending on LW motor)
Temperature of water: 0°C to +60°C (depending on the configuration of the motor)
Maximum permissible quantity of suspended sand: 50 g/m3
Applications:
Water distribution in civil and industrial systems
Pressure boosting
Irrigation
Fire-fighting
Mining industry
Groundwater level control
Materials:
Delivery head/valve casing: Stainless steel
Diffuser: Stainless steel
Impeller: Stainless steel
Taperlock: Duplex stainless steel
Suction screen: Stainless steel
Pump shaft: Stainless steel
ZR version: available in DUPLEX
Multi-stage centrifugal submersible pumps for clean water in 6” wells
Lowara multi-stage centrifugal submersible pumps for clean water in 6” wells. Made of AISI 304 or AISI 316 stainless steel.
These durable and lightweight pumps assure high-efficiency, low maintenance costs and ease of management. Their main characteristics include the possibility of replacing the impeller inlet wear ring. Available in the high-pressure version to guarantee heads of up to 700 metres. Can be coupled to all NEMA standard motors.
Specifications:
Delivery: up to 78 m3/h
Head: up to 700 metres (high-pressure version)
Power supply: three-phase 50 and 60 Hz
Three-phase version: 380-415 V
Power: 0.55 kW to 55 kW
Can be coupled with L4C, L6W and L8W three-phase asynchronous motors in a coolant bath.
Maximum overall diameter of pump (two cable covers included):
144 mm (standard version)
195 mm (high-pressure version)
Water temperature: 0°C to +60°C (depending on the limits of the associated motor)
Maximum permissible quantity of suspended sand: 100 g/m3
Applications:
Materials:
Delivery port, non-return valve, diffuser, impeller, cable cover, lower support, pump shaft, coupling, spacer, screws, tie-rods: Stainless steel
Thrust bearing: PTFE
Wear ring: Technopolymer PPO
Upper bearing: tungsten carbide
Shaft guide bearing: polyurethane
Elastomers: EPDM
Multi-stage centrifugal submersible pumps for clean water in 6” wells
Lowara multi-stage centrifugal submersible pumps for clean water in 6” wells. Made of AISI 304 or AISI 316 stainless steel.
These durable and lightweight pumps assure high-efficiency, low maintenance costs and ease of management. Their main characteristics include the possibility of replacing the impeller inlet wear ring. Available in the high-pressure version to guarantee heads of up to 700 metres. Can be coupled to all NEMA standard motors.
Specifications:
Delivery: up to 78 m3/h
Head: up to 700 metres (high-pressure version)
Power supply: three-phase 50 and 60 Hz
Three-phase version: 380-415 V
Power: 0.55 kW to 55 kW
Can be coupled with L4C, L6W and L8W three-phase asynchronous motors in a coolant bath.
Maximum overall diameter of pump (two cable covers included):
144 mm (standard version)
195 mm (high-pressure version)
Water temperature: 0°C to +60°C (depending on the limits of the associated motor)
Maximum permissible quantity of suspended sand: 100 g/m3
Applications:
Materials:
Delivery port, non-return valve, diffuser, impeller, cable cover, lower support, pump shaft, coupling, spacer, screws, tie-rods: Stainless steel
Thrust bearing: PTFE
Wear ring: Technopolymer PPO
Upper bearing: tungsten carbide
Shaft guide bearing: polyurethane
Elastomers: EPDM
Multi-stage centrifugal submersible pumps for clean water in 6” wells
Lowara multi-stage centrifugal submersible pumps for clean water in 6” wells. Made of AISI 304 or AISI 316 stainless steel.
These durable and lightweight pumps assure high-efficiency, low maintenance costs and ease of management. Their main characteristics include the possibility of replacing the impeller inlet wear ring. Available in the high-pressure version to guarantee heads of up to 700 metres. Can be coupled to all NEMA standard motors.
Specifications:
Delivery: up to 78 m3/h
Head: up to 700 metres (high-pressure version)
Power supply: three-phase 50 and 60 Hz
Three-phase version: 380-415 V
Power: 0.55 kW to 55 kW
Can be coupled with L4C, L6W and L8W three-phase asynchronous motors in a coolant bath.
Maximum overall diameter of pump (two cable covers included):
144 mm (standard version)
195 mm (high-pressure version)
Water temperature: 0°C to +60°C (depending on the limits of the associated motor)
Maximum permissible quantity of suspended sand: 100 g/m3
Applications:
Materials:
Delivery port, non-return valve, diffuser, impeller, cable cover, lower support, pump shaft, coupling, spacer, screws, tie-rods: Stainless steel
Thrust bearing: PTFE
Wear ring: Technopolymer PPO
Upper bearing: tungsten carbide
Shaft guide bearing: polyurethane
Elastomers: EPDM
Submersible vertical electric pumps
Immersible vertical electric pumps for the industrial and commercial sectors.
Specifications:
Delivery: up to 120 m3/h
Head: up to 240 m
Power supply: three-phase and single-phase 50 and 60 Hz
Power: 0.30 kW to 22 kW
Maximum operating pressure: 25 bar
Temperature of pumped liquid: 10°C to +90°C
Application:
Pumping of coolants, lubricants and condensate
Machine tools, welders, engine test stands
Cooling systems
Washing systems
Irrigation – pontoon mount
Water supply / stock watering – pontoon mount
Materials:
Impeller, diffuser, shaft, outer sleeve: stainless steel
Mechanical seal: Ceramic/Carbon/FPM
Elastomers: FPM