We have an extensive range of water filters that we offer our customers. Our range can vary at times, so if you don’t see what you need, or require advice on a product, just contact us. One of our friendly team will be more than happy to help you. We only utilise the best suppliers so we can pass on these quality products to our customers.
As a business we believe there are strong reasons to buy products from us. Our extensive range of quality water filters offer excellent reliability and efficiency. In turn, this results in lower operating costs and peace of mind.
When it comes to our systems they use leading technology and are sold by a committed team of sales staff. We find that people who use our systems benefit from the combination of experienced staff and support from a skilled supplier network.
Please be advised that this is not a shopping site. If you need help with any water filter project, or are looking to find a product, just contact us. Our team at Allabout Pumps & Pipes will be able to assist with sizing, measurements, and much more.
If you need help regarding any product, contact the friendly staff of Allabout Pumps & Pipes.
Applications
High quality screen filter for agriculture and landscape irrigation systems.
Specifications
AG Products “Spin Clean™” filters are unique in that incoming dirty water is forced through a directional nozzle plate onto the inside of the stainless steel screen. This creates a centrifugal action which rotates debris down he screen wall to the large debris holding basin. Debris is flushed out via a ball valve or unscrewing cap. Spinning action keeps more of the screen area clean, minimizing pressure losses due to excessive dirt build-up.
Features
- 20mm and 25mm inlet/outlet
- Two piece threaded housing with ‘O’ ring seal.
- Molded from high heat and chemical resistant ABS plastic.
- Ball valve for flushing debris.
- Stainless steel filter screen.
- 20mm screen area 585mm
- 25mm screen area 710mm
- 20mm maximum size cleaning efficiency 15LPM
- 25mm maximum size cleaning efficiency 26LPM
- Maximum operating pressure 550kPA
- Mesh selection 50, 100, 150
- 20mm maximum flow 42LPM
- 25mm maximum flow 105LPM
Applications
High quality screen filter for agriculture and landscape irrigation systems.
Specifications
AG Products “Spin Clean™” filters are unique in that incoming dirty water is forced through a directional nozzle plate onto the inside of the stainless steel screen. This creates a centrifugal action which rotates debris down he screen wall to the large debris holding basin. Debris is flushed out via a ball valve or unscrewing cap. Spinning action keeps more of the screen area clean, minimizing pressure losses due to excessive dirt build-up.
Features
- 40mm and 50mm inlet/outlet
- Two piece threaded housing with ‘O’ ring seal.
- Molded from high heat and chemical resistant ABS plastic.
- Ball valve for flushing debris.
- Stainless steel filter screen.
- 40mm screen area 1.5m²
- 50mm screen area 1.5m²
- 40mm maximum size cleaning efficiency 189LPM
- 50mm maximum size cleaning efficiency 378LPM
- Maximum operating pressure 689kPA
- Mesh selection 50, 100, 150
- 40mm maximum flow 207LPM
- 50mm maximum flow 434LPM
The Puretec LD Series is designed for large capacity filtration in high flow rate and heavy sediment applications. It helps to improve water quality and protects your plumbing system from damage and premature clogging due to sediment build-up. The latest technology in filter housings engineering, constructed using reinforced polypropylene that ensures years of trouble-free service. Puretec LD Series housings are also compatible with a broad range of chemicals.
Features & Benefits
• Large diameter filter housings for larger flow rates.
• Compact and economical, ideal for duplex systems.
• Quick and easy installation.
• Internal and external use to suit different applications.
• 1 year warranty.^
Specifications
Flow Rate
80 Lpm
Min/Max Temperature
0 – 52°C
Min/Max Pressure
0 – 875 kPa
Connection
1” BSP [25mm]
Warranty
1 Year
Applications
Used for protection in drip, spray and sprinkler watering systems.
Features
- UV resistant
- BSP male thread
- Swivel inlet/outlet (Check availability)
- High flow low pressure loss
Specifications
- Body – polypropylene
- Gaskets – EPDM
- Maximum working pressure 800kPa
- Maximum flow 20mm 58 LPM
- Maximum flow 25mm 85 LPM
- Filtration screen – polyester/stainless steel screen
- Screen filter area 96cm²
- 80 mesh (200 micron) Blue
- 120 mesh (130 micron) Brown
- 155 mesh (100 micron) Green
Applications
Used for protection in drip, spray and sprinkler watering systems.
Features
- UV resistant
- BSp male thread
- High flow low pressure loss
Specifications
- Body – polypropylene
- Gaskets – EPDM
- Maximum working pressure 1000kPa
- Maximum flow 40mm 207 LPM
- Maximum flow 50mm 342 LPM
- Filtration screen – polyester/stainless steel screen
- Screen filter area 40mm 552cm²
- Screen filter area 50mm 670cm²
- 80 mesh (200 micron) Blue
- 120 mesh (130 micron) Brown
- 155 mesh (100 micron) Green
Applications
Designed for use as control filters or head filters for irrigation zones.
Specifications
- Filter element made of PVC coated with durable chrome mesh screen.
- 90° entry and exit point allows water to flow along the length of filter, water flows through element openings while solid particles can be removed by opening drain valve.
- Electrostatically oven cured with an epoxy-polyester combination.
- Mesh sizes 40, 60, 80, 100, 120, 140.
- Maximum operating working pressure 800kPa.
- Flow Rate : 11000 – 180000 lph.
Applications
Designed for use as control filters or head filters for irrigation zones.
Specifications
- Filter element made of high grade plastic with disc’s in stack form.
- 90° entry and exit point allows water to flow along the length of filter, water flows through DISCʼS while solid particles can be removed by opening drain valve.
- Electrostatically oven cured with an epoxy-polyester combination.
- Mesh sizes 80, 120, 150.
- Maximum operating working pressure 800kPa.
- Flow Rate : 13000 – 48000 lph.
Applications
Designed for use as control filters or head filters for irrigation zones.
Specifications
- Filter element made of PVC coated with durable chrome mesh screen.
- Inlet/Outlet on axis of 180° allows direct flow of water along the length of screen, water passes through screen while solid particles can be removed by opening drain valve.
- Electrostatically oven cured with an epoxypolyester combination.
- Mesh sizes 40, 60, 80, 120, 140.
- Maximum operating working pressure 800kPa.
- Flow Rate : 10000 – 220000 lph.
Applications
Designed for use as control filters or head filters for irrigation zones.
Specifications
- Filter element made of high grade plastic with disc’s in stack form.
- Inlet/Outlet at 180° flow through design which utilises a direct flow of water along the length of the element. Solid particles can be removed by opening drain valve.
- Electrostatically oven cured with an epoxypolyester combination.
- Mesh sizes 80, 120, 150.
- Maximum operating working pressure 800kPa.
- Flow Rate : 30000 – 90000 lph.
Applications
Used as primary filter for water from open dams and recycled water. To remove algae from water.
Description
- Uses gravel or sand for depth filtration.
- Double bottom chamber with “mushroom” diffusers for efficient filtration and backwashing.
- Modular design – suitable for use in arrays for various flow rates.
Specifications
- Media size 0.8mm – 1.2mm crushed quartz
- Maximum Pressure : 800kPa
- Rubber coated legs.
- Large service openings for inspection and service
- Electrostatically oven cured with an epoxy-polyester combination
Applications:
Designed for use as control filters or head filters for irrigation zones. To remove suspended particles.
Description
Water flows freely on a spiral path along the length of the filters chamber. Centrifugal force seperates the solid particles from the water. Solid particles gravitate downwards to be collected in underflow chamber. Clean water flow’s from the top of flter.
Specifications
- Inlet / Outlet on Axis of 90°.
- Electrostatically oven cured with an epoxypolyester combination.
- Maximum operating working pressure : 800kPa
- Flow Rate : 2000 – 220000lph
