Product Category: Irrigation

Lance Jet(I)

The Lance Jets(I) are small and medium size nozzles capable of achieving a maximum height of 14 metres.

Integral ball joint allows to get parabolic or vertical jets, offering a large range of water displays.

lance-jet-pic

Venturi Fertiliser Injector Kit

Application

Used to inject soluble or liquid fertiliser in greenhouse, open field and landscape watering systems. (Check local codes for backflow prevention laws.)

Features

  • Kit includes:
    • Venturi.
    • Built in sight glass flow indicator.
    • Control valve to throttle amount of fertiliser.
    • 1m of suction tube
    • Screen

Specifications

  • Body – Polypropylene for resistance to acids and other chemicals.
  • Maximum working pressure 785kPa
  • Minimum working pressure on pressurized systems must be 98kPa.
  • When using on by pass pressure differential between the inlet and outlet must be at least 70kPa.
  • Venturi should always be installed on level plain.

Venturi Fertiliser Injector Kit

Application

Used to inject soluble or liquid fertiliser in greenhouse, open field and landscape watering systems. (Check local codes for backflow prevention laws.)

Features

  • Kit includes:
    • Venturi.
    • Built in sight glass flow indicator.
    • Control valve to throttle amount of fertiliser.
    • 1m of suction tube
    • Screen

Specifications

  • Body – Polypropylene for resistance to acids and other chemicals.
  • Maximum working pressure 785kPa
  • Minimum working pressure on pressurized systems must be 98kPa.
  • When using on by pass pressure differential between the inlet and outlet must be at least 70kPa.
  • Venturi should always be installed on level plain.

Venturi Fertiliser Injector Kit

Application

Used to inject soluble or liquid fertiliser in greenhouse, open field and landscape watering systems. (Check local codes for backflow prevention laws.)

Features

  • Kit includes:
    • Venturi.
    • Built in sight glass flow indicator.
    • Control valve to throttle amount of fertiliser.
    • 1m of suction tube
    • Screen

Specifications

  • Body – Polypropylene for resistance to acids and other chemicals.
  • Maximum working pressure 785kPa
  • Minimum working pressure on pressurized systems must be 98kPa.
  • When using on by pass pressure differential between the inlet and outlet must be at least 70kPa.
  • Venturi should always be installed on level plain.

Dosatron DI16 Fertiliser Injector

Application

Used to inject soluble or liquid fertiliser in greenhouse, open field and landsacpe watering systems.

Features

  • Can be installed directly on main line (Check user guide)
  • Dose of concentrate always proportional to volume of water entering dispenser
  • No power needed
  • Uses hydraulics from irrigation system
  • No waste water
  • Low pressure flow operstion

Specifications

  • Body – Delrin
  • Dosing stem – Polypropylene and polyethylene
  • Piston – Polyurethane, nylon, nitrile, delrin
  • Built in protection filter 50 mesh
  • Maximum operating temperature 40°C
  • Maximum head loss 140kPa at max flow rate
  • Maximum suction height 4 metres
  • Practical operating flow 10L/Hr-2500L/Hr through injector
  • Operating pressure 30-600kPa
  • Maximum injected solution at 10L/hr 0.02L/Hr
  • Maximum injected solution at 2500L/hr 40L/Hr
  • Adjustable dosage 0.2% to 1.6%
  • Inlet/outlet 20mm BSP male

Dosatron DI16 Fertiliser Injector

Application

Used to inject soluble or liquid fertiliser in greenhouse, open field and landsacpe watering systems.

Features

  • Can be installed directly on main line (Check user guide)
  • Dose of concentrate always proportional to volume of water entering dispenser
  • No power needed
  • Uses hydraulics from irrigation system
  • No waste water
  • Low pressure flow operstion

Specifications

  • Body – Delrin
  • Dosing stem – Polypropylene and polyethylene
  • Piston – Polyurethane, nylon, nitrile, delrin
  • Built in protection filter 50 mesh
  • Maximum operating temperature 40°C
  • Maximum head loss 140kPa at max flow rate
  • Maximum suction height 4 metres
  • Practical operating flow 10L/Hr-2500L/Hr through injector
  • Operating pressure 30-600kPa
  • Maximum injected solution at 10L/hr 0.02L/Hr
  • Maximum injected solution at 2500L/hr 40L/Hr
  • Adjustable dosage 0.2% to 1.6%
  • Inlet/outlet 20mm BSP male

Dosatron DI16 Fertiliser Injector

Application

Used to inject soluble or liquid fertiliser in greenhouse, open field and landsacpe watering systems.

Features

  • Can be installed directly on main line (Check user guide)
  • Dose of concentrate always proportional to volume of water entering dispenser
  • No power needed
  • Uses hydraulics from irrigation system
  • No waste water
  • Low pressure flow operstion

Specifications

  • Body – Delrin
  • Dosing stem – Polypropylene and polyethylene
  • Piston – Polyurethane, nylon, nitrile, delrin
  • Built in protection filter 50 mesh
  • Maximum operating temperature 40°C
  • Maximum head loss 140kPa at max flow rate
  • Maximum suction height 4 metres
  • Practical operating flow 10L/Hr-2500L/Hr through injector
  • Operating pressure 30-600kPa
  • Maximum injected solution at 10L/hr 0.02L/Hr
  • Maximum injected solution at 2500L/hr 40L/Hr
  • Adjustable dosage 0.2% to 1.6%
  • Inlet/outlet 20mm BSP male

Dosatron D8R Fertiliser Injector

Application

Used to inject soluble or liquid fertiliser in greenhouse, open field and landsacpe watering systems.

Features

  • Can be installed directly on main line (Check user guide)
  • Dose of concentrate always proportional to volume of water entering dispenser
  • No power needed
  • Uses hydraulics from irrigation system
  • No waste water

Specifications

  • Body – Delrin
  • Dosing stem – Polypropylene and polyethylene
  • Piston – Polyurethane, nylon, nitrile, delrin
  • Built in protection filter 32 mesh stainless steel
  • Maximum operating temperature 40ºC
  • Maximum head loss 70kPa at max flow rate
  • Maximum suction height 4 metres
  • Practical operating flow 5000-8000LPH through injector
  • Operating pressure 150-800kPa
  • Maximum injected solution at 500L/H – 10L
  • Maximum injected solution at 8000L/H – 160L
  • Adjustable dosage 0.2% to 2%
  • Inlet/outlet 50mm metric poly

Dosatron D8R Fertiliser Injector

Application

Used to inject soluble or liquid fertiliser in greenhouse, open field and landsacpe watering systems.

Features

  • Can be installed directly on main line (Check user guide)
  • Dose of concentrate always proportional to volume of water entering dispenser
  • No power needed
  • Uses hydraulics from irrigation system
  • No waste water

Specifications

  • Body – Delrin
  • Dosing stem – Polypropylene and polyethylene
  • Piston – Polyurethane, nylon, nitrile, delrin
  • Built in protection filter 32 mesh stainless steel
  • Maximum operating temperature 40ºC
  • Maximum head loss 70kPa at max flow rate
  • Maximum suction height 4 metres
  • Practical operating flow 5000-8000LPH through injector
  • Operating pressure 150-800kPa
  • Maximum injected solution at 500L/H – 10L
  • Maximum injected solution at 8000L/H – 160L
  • Adjustable dosage 0.2% to 2%
  • Inlet/outlet 50mm metric poly

Dosatron D8R Fertiliser Injector

Application

Used to inject soluble or liquid fertiliser in greenhouse, open field and landsacpe watering systems.

Features

  • Can be installed directly on main line (Check user guide)
  • Dose of concentrate always proportional to volume of water entering dispenser
  • No power needed
  • Uses hydraulics from irrigation system
  • No waste water

Specifications

  • Body – Delrin
  • Dosing stem – Polypropylene and polyethylene
  • Piston – Polyurethane, nylon, nitrile, delrin
  • Built in protection filter 32 mesh stainless steel
  • Maximum operating temperature 40ºC
  • Maximum head loss 70kPa at max flow rate
  • Maximum suction height 4 metres
  • Practical operating flow 5000-8000LPH through injector
  • Operating pressure 150-800kPa
  • Maximum injected solution at 500L/H – 10L
  • Maximum injected solution at 8000L/H – 160L
  • Adjustable dosage 0.2% to 2%
  • Inlet/outlet 50mm metric poly
Call Us