Description
Diaphragm pressure vessels for installation on the pressure side in conjunction with drinking water, water supply or pressure boosting systems. This tank is used to avoid
pressure surges in the system and reduces the switching frequency of the pumps/system.
Scope of delivery
Diaphragm pressure vessel: 8 l/PN 16, with drain
Throughflow fitting in accordance with DIN 4807; provided with shut-off ball cock for testing and inspection purposes
Adapter with connection ports for the diaphragm pressure vessels
Installation sundries
Sealing material
Description
Diaphragm pressure vessels for installation on the pressure side in conjunction with drinking water, water supply or pressure boosting systems. This tank is used to avoid
pressure surges in the system and reduces the switching frequency of the pumps/system.
Scope of delivery
Diaphragm pressure vessel: 8 l/PN 16, with drain
Throughflow fitting in accordance with DIN 4807; provided with shut-off ball cock for testing and inspection purposes
Adapter with connection ports for the diaphragm pressure vessels
Installation sundries
Sealing material
Description
Diaphragm pressure vessels for installation on the pressure side in conjunction with drinking water, water supply or pressure boosting systems. This tank is used to avoid
pressure surges in the system and reduces the switching frequency of the pumps/system.
Scope of delivery
Diaphragm pressure vessel: 8 l/PN 16, with drain
Throughflow fitting in accordance with DIN 4807; provided with shut-off ball cock for testing and inspection purposes
Adapter with connection ports for the diaphragm pressure vessels
Installation sundries
Sealing material
4″ Stainless Steel Submersible Borehole Pump.
Your advantages
Long service life thanks to corrosion-resistant stainless steel, optionally available in V4A quality
ACS certified for drinking water applications
A high degree of flexibility thanks to versions in the 4, 6, 8 and 10-inch area
High range of performance from 1 to 250 m³/h
Construction
Multistage 4″ submersible pump in tie strap version for vertical or horizontal installation
Application
For water and drinking water supply from boreholes and rainwater storage
Process water supply
For municipal water supply, sprinkling and irrigation
Pressure boosting
Lowering of the water level
For pumping water in industrial applications
For pumping water without long-fibre and abrasive constituents
Equipment/function
Multistage submersible-motor pump with radial or semi-axial impellers
Integrated non-return valve
NEMA coupling
Single-phase or three-phase AC motor
Hermetically sealed motors
Scope of delivery
Hydraulics + motor completely assembled
1.5/2.5 m connection cable drinking water approval (cross-section: 4 x 1.5 mm2)
Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch
Installation and operating instructions
Technical data
Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
Submerged operating mode: S1
Fluid temperature: 3 – 30 °C
Minimum flow rate at motor: 0.1 m/s
Max. sand content: 50 g/m3
Max. number of starts: 20/h
Max. immersion depth: 150 m
Protection class: IP68
Pressure connection: Rp 1¼ – Rp 2
Materials
Hydraulics housing: Stainless steel 1.4301
Impellers: Stainless steel 1.4301
Hydraulic shaft: Stainless steel 1.4057
Motor housing: Stainless steel 1.4301
Motor shaft: Stainless steel 1.4305
Description/construction
Submersible pump with ACS approval for vertical or horizontal installation.
Hydraulics
Multistage submersible-motor pump with 4″ NEMA connection and radial or semi-axial impellers with sectional construction. Integrated non-return valve. All parts that come in contact with the fluid are made of corrosion-free materials.
Motor
Corrosion-free single-phase or three-phase motor for direct starting. Sealed and hermetically cast motor, resin-impregnated, with enamel-insulated winding, self-lubricating bearing, with water-glycol filling.
Cooling
The motor is cooled by the pumped fluid. The motor must always be immersed when operated. The limit values for maximum fluid temperature and minimum flow velocity must be adhered to. Vertical installation is possible with or without cooling jacket. Horizontal installation must be performed in conjunction with a cooling jacket.
Pressure shroud
The pressure shroud is used for the direct installation of the unit in the pipe system. Standard models are without mounted non-return valves. The maximum inlet pressure is 10 bar.
4″ Stainless Steel Submersible Borehole Pump.
Your advantages
Long service life thanks to corrosion-resistant stainless steel, optionally available in V4A quality
ACS certified for drinking water applications
A high degree of flexibility thanks to versions in the 4, 6, 8 and 10-inch area
High range of performance from 1 to 250 m³/h
Construction
Multistage 4″ submersible pump in tie strap version for vertical or horizontal installation
Application
For water and drinking water supply from boreholes and rainwater storage
Process water supply
For municipal water supply, sprinkling and irrigation
Pressure boosting
Lowering of the water level
For pumping water in industrial applications
For pumping water without long-fibre and abrasive constituents
Equipment/function
Multistage submersible-motor pump with radial or semi-axial impellers
Integrated non-return valve
NEMA coupling
Single-phase or three-phase AC motor
Hermetically sealed motors
Scope of delivery
Hydraulics + motor completely assembled
1.5/2.5 m connection cable drinking water approval (cross-section: 4 x 1.5 mm2)
Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch
Installation and operating instructions
Technical data
Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
Submerged operating mode: S1
Fluid temperature: 3 – 30 °C
Minimum flow rate at motor: 0.1 m/s
Max. sand content: 50 g/m3
Max. number of starts: 20/h
Max. immersion depth: 150 m
Protection class: IP68
Pressure connection: Rp 1¼ – Rp 2
Materials
Hydraulics housing: Stainless steel 1.4301
Impellers: Stainless steel 1.4301
Hydraulic shaft: Stainless steel 1.4057
Motor housing: Stainless steel 1.4301
Motor shaft: Stainless steel 1.4305
Description/construction
Submersible pump with ACS approval for vertical or horizontal installation.
Hydraulics
Multistage submersible-motor pump with 4″ NEMA connection and radial or semi-axial impellers with sectional construction. Integrated non-return valve. All parts that come in contact with the fluid are made of corrosion-free materials.
Motor
Corrosion-free single-phase or three-phase motor for direct starting. Sealed and hermetically cast motor, resin-impregnated, with enamel-insulated winding, self-lubricating bearing, with water-glycol filling.
Cooling
The motor is cooled by the pumped fluid. The motor must always be immersed when operated. The limit values for maximum fluid temperature and minimum flow velocity must be adhered to. Vertical installation is possible with or without cooling jacket. Horizontal installation must be performed in conjunction with a cooling jacket.
Pressure shroud
The pressure shroud is used for the direct installation of the unit in the pipe system. Standard models are without mounted non-return valves. The maximum inlet pressure is 10 bar.
4″ Stainless Steel Submersible Borehole Pump.
Your advantages
Long service life thanks to corrosion-resistant stainless steel, optionally available in V4A quality
ACS certified for drinking water applications
A high degree of flexibility thanks to versions in the 4, 6, 8 and 10-inch area
High range of performance from 1 to 250 m³/h
Construction
Multistage 4″ submersible pump in tie strap version for vertical or horizontal installation
Application
For water and drinking water supply from boreholes and rainwater storage
Process water supply
For municipal water supply, sprinkling and irrigation
Pressure boosting
Lowering of the water level
For pumping water in industrial applications
For pumping water without long-fibre and abrasive constituents
Equipment/function
Multistage submersible-motor pump with radial or semi-axial impellers
Integrated non-return valve
NEMA coupling
Single-phase or three-phase AC motor
Hermetically sealed motors
Scope of delivery
Hydraulics + motor completely assembled
1.5/2.5 m connection cable drinking water approval (cross-section: 4 x 1.5 mm2)
Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch
Installation and operating instructions
Technical data
Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
Submerged operating mode: S1
Fluid temperature: 3 – 30 °C
Minimum flow rate at motor: 0.1 m/s
Max. sand content: 50 g/m3
Max. number of starts: 20/h
Max. immersion depth: 150 m
Protection class: IP68
Pressure connection: Rp 1¼ – Rp 2
Materials
Hydraulics housing: Stainless steel 1.4301
Impellers: Stainless steel 1.4301
Hydraulic shaft: Stainless steel 1.4057
Motor housing: Stainless steel 1.4301
Motor shaft: Stainless steel 1.4305
Description/construction
Submersible pump with ACS approval for vertical or horizontal installation.
Hydraulics
Multistage submersible-motor pump with 4″ NEMA connection and radial or semi-axial impellers with sectional construction. Integrated non-return valve. All parts that come in contact with the fluid are made of corrosion-free materials.
Motor
Corrosion-free single-phase or three-phase motor for direct starting. Sealed and hermetically cast motor, resin-impregnated, with enamel-insulated winding, self-lubricating bearing, with water-glycol filling.
Cooling
The motor is cooled by the pumped fluid. The motor must always be immersed when operated. The limit values for maximum fluid temperature and minimum flow velocity must be adhered to. Vertical installation is possible with or without cooling jacket. Horizontal installation must be performed in conjunction with a cooling jacket.
Pressure shroud
The pressure shroud is used for the direct installation of the unit in the pipe system. Standard models are without mounted non-return valves. The maximum inlet pressure is 10 bar.
Self-priming horizontal multistage pressure pump.
Your advantages
Simple: Plug & Pump system
Efficient: Highly efficient hydraulics, low electricity consumption and very compact thanks to motor optimisation
Automatically operating system and dry-running protection thanks to Wilo-HiControl 1
Low-noise: Noise level between 56 dB(A) and 64 dB(A)
360° rotatable electronic pump control HiControl 1 for easy installation
Construction
Water-supply system with automatic pump control system in non self-priming version (HiMulti 3 C) or self-priming version (HiMulti 3 C P)
Application
Water supply (drinking water certification in accordance with ACS)
Sprinkling
Irrigation and spraying
Rainwater utilisation
Equipment/function
Directly flanged motor
Connection cable with plug
Thermal motor protection switch
Automatic pump control
Low-water cut-out switch
Scope of delivery
Pump
Pump control Wilo-HiControl 1
1 piece plastic connector with seal for manual connection to the inlet pipe
Wilo-Connector (electrical quick connector)
Installation and operating instructions
Technical data
Mains connection: 1~230 V, 50 Hz
Perm. fluid temperature: 0 °C to +40 °C (+55 °C for 10 min)
Perm. ambient temperature: -15 °C to +40 °C
Permissible storage temperature: -30 °C to +60 °C
Max. permissible operating pressure: 8 bar
Max. permissible inlet pressure: 3 bar
Start-up pressure: 1.5 bar
Switch off volume flow: 95l/h
Protection class: IP54
Suction side connection: Rp1
Connection on pressure side: Rp1
Information about the automatic can be found in the documentation for Wilo-HiControl 1
Materials
Pump housing in Technopolymer with ACS, WRAS and KTW drinking certifications
Impellers and stage casing made of Noryl 30% GF with drinking water certification in accordance with ACS, WRAS and KTW
Pump cover and shaft made of stainless steel
Mechanical seal made of ceramic/carbon
Housing for the pressure monitoring made of Nylon PA6 with drinking water certification in accordance with ACS
Self-priming horizontal multistage pressure pump.
Your advantages
Simple: Plug & Pump system
Efficient: Highly efficient hydraulics, low electricity consumption and very compact thanks to motor optimisation
Automatically operating system and dry-running protection thanks to Wilo-HiControl 1
Low-noise: Noise level between 56 dB(A) and 64 dB(A)
360° rotatable electronic pump control HiControl 1 for easy installation
Construction
Water-supply system with automatic pump control system in non self-priming version (HiMulti 3 C) or self-priming version (HiMulti 3 C P)
Application
Water supply (drinking water certification in accordance with ACS)
Sprinkling
Irrigation and spraying
Rainwater utilisation
Equipment/function
Directly flanged motor
Connection cable with plug
Thermal motor protection switch
Automatic pump control
Low-water cut-out switch
Scope of delivery
Pump
Pump control Wilo-HiControl 1
1 piece plastic connector with seal for manual connection to the inlet pipe
Wilo-Connector (electrical quick connector)
Installation and operating instructions
Technical data
Mains connection: 1~230 V, 50 Hz
Perm. fluid temperature: 0 °C to +40 °C (+55 °C for 10 min)
Perm. ambient temperature: -15 °C to +40 °C
Permissible storage temperature: -30 °C to +60 °C
Max. permissible operating pressure: 8 bar
Max. permissible inlet pressure: 3 bar
Start-up pressure: 1.5 bar
Switch off volume flow: 95l/h
Protection class: IP54
Suction side connection: Rp1
Connection on pressure side: Rp1
Information about the automatic can be found in the documentation for Wilo-HiControl 1
Materials
Pump housing in Technopolymer with ACS, WRAS and KTW drinking certifications
Impellers and stage casing made of Noryl 30% GF with drinking water certification in accordance with ACS, WRAS and KTW
Pump cover and shaft made of stainless steel
Mechanical seal made of ceramic/carbon
Housing for the pressure monitoring made of Nylon PA6 with drinking water certification in accordance with ACS
Self-priming horizontal multistage pressure pump.
Your advantages
Simple: Plug & Pump system
Efficient: Highly efficient hydraulics, low electricity consumption and very compact thanks to motor optimisation
Automatically operating system and dry-running protection thanks to Wilo-HiControl 1
Low-noise: Noise level between 56 dB(A) and 64 dB(A)
360° rotatable electronic pump control HiControl 1 for easy installation
Construction
Water-supply system with automatic pump control system in non self-priming version (HiMulti 3 C) or self-priming version (HiMulti 3 C P)
Application
Water supply (drinking water certification in accordance with ACS)
Sprinkling
Irrigation and spraying
Rainwater utilisation
Equipment/function
Directly flanged motor
Connection cable with plug
Thermal motor protection switch
Automatic pump control
Low-water cut-out switch
Scope of delivery
Pump
Pump control Wilo-HiControl 1
1 piece plastic connector with seal for manual connection to the inlet pipe
Wilo-Connector (electrical quick connector)
Installation and operating instructions
Technical data
Mains connection: 1~230 V, 50 Hz
Perm. fluid temperature: 0 °C to +40 °C (+55 °C for 10 min)
Perm. ambient temperature: -15 °C to +40 °C
Permissible storage temperature: -30 °C to +60 °C
Max. permissible operating pressure: 8 bar
Max. permissible inlet pressure: 3 bar
Start-up pressure: 1.5 bar
Switch off volume flow: 95l/h
Protection class: IP54
Suction side connection: Rp1
Connection on pressure side: Rp1
Information about the automatic can be found in the documentation for Wilo-HiControl 1
Materials
Pump housing in Technopolymer with ACS, WRAS and KTW drinking certifications
Impellers and stage casing made of Noryl 30% GF with drinking water certification in accordance with ACS, WRAS and KTW
Pump cover and shaft made of stainless steel
Mechanical seal made of ceramic/carbon
Housing for the pressure monitoring made of Nylon PA6 with drinking water certification in accordance with ACS